@article { author = {زکي عبد الجواد, هدى}, title = {تنمية المناطق المتدهورة عمرانيا بالمشارکة ديمقراطية التنمية}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {782-789}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19429}, abstract = {Improving of slums and upgrading them physically, economically and socially is considered as the key requirement in all scientific, social and governmental forums. It is widely recognized that the participation of the population is essential for the sustainable and equitable development. The concept of "public participation as an essential ingredient for urban improvement and development" has been applied in many countries because of its importance on the involvement of local communities' members in decision-making on their living environment. The contribution of public participation in making of the local development is a practical application of the concept of popular action based on desire and choice, which can benefit from human and substantial efforts and potential which will ease the burden on governments and also will achieve the immanence goals of development process. يعتبر التوجه الحالي نحو تنمية وتحسين المناطق العشوائية والارتقاء بها عمرانياً واقتصادياً واجتماعياً هو المطلب الرئيسي في کافة المنتديات العلمية والاجتماعية والحکومية. وأصبح من المعترف به على نطاق واسع أن مشارکة السکان أمر أساسي من أجل التنمية المستدامة والعادلة. وتم تطبيق مفهوم "المشارکة الشعبية کأحد المقومات الأساسية لعمليات التحسين والتنمية العمرانية" في العديد من الدول لما له من أهمية تتعلق بإشراک أفراد المجتمعات المحلية في اتخاذ القرارات المتعلقة ببيئتهم المعيشية. ويعتبر إسهام المشارکة الشعبية في إحداث التنمية المحلية تطبيق عملي لمفهوم العمل الشعبي القائم على الرغبة والاختيار، والذي يمکن من خلاله الاستفادة من الجهود والإمکانيات الأهلية المادية والبشرية مما يؤدى إلى تخفيف الأعباء على الحکومات بالإضافة إلى تحقيق الأهداف الذاتية لعملية التنمية.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19429.html}, eprint = {https://jaes.journals.ekb.eg/article_19429_5e0f3867693a0d5b25063969697c9361.pdf} } @article { author = {شلبي, هايدي}, title = {إدارة المدن الجديدة فى مصر دراسة مقارنة}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {665-675}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19430}, abstract = {شهدت سنوات النصف الثاني من القرن العشرين نموا عمرانيا وسکانيا واقتصاديا نتيجة المتغيرات السياسية والاقتصادية التي مرت بها مصر خلال تلک المرحلة. لذلک استهدفت السياسات الإقليمية توجيه النمو العمراني بشکل يحد من المرکزية العمرانية والسکانية والاقتصادية المتزايدة للمدن الکبرى وتوجيه العمران والسکان مع الأنشطة إلي المدن الصحراوية وذلک من خلال مخططات التنمية العمرانية. وظهر ذلک في ورقة أکتوبر ١٩٧٣ التي أشارت انه ليس المشکلة هي ترکز السکان والأنشطة الاقتصادية والاجتماعية في الوادي القديم فحسب، ولکن يضاف مشکلة أخري هي مشکلة الترکز الأعظم في العاصمة حتى وصل عدد سکانها المقيمين إلي خمس مجموع سکان القطر بأکمله وهي نسبة عالية کما إنها آخذه في الازدياد. وکان الحل المنصوص عليه في ورقة أکتوبر هو وضع استراتيجية شاملة في إطار مشروع شامل لرسم خريطة جديدة لمصر بإيجاد مناطق ترکز سکاني ونشاطات اقتصادية جديدة، وتکون لها قوة الجذب الحضري بکل مقوماتها، مما يجذب إليها السکان حتى تعادل قوة جذب العاصمة. ومن هنا ظهرت المدن الجديدة کرد فعل للازدحام والکثافات العالية والتلوث في المدن الکبرى القائمة ونقص الخدمات والمناطق المفتوحة بها، لهذا فان تخطيط تلک المدن يهدف إلي المحافظة علي الطبيعة والمناطق المفتوحة وإيجاد اتزان بيئي بين السکان والعمل وتقليل الحجم والکثافات وتوفير الخدمات بالمستوي والحجم المناسبين. ويتناول هذا البحث استعراض النموذج المصري في إدارة التنمية العمرانية من خلال دراسة حالة إدارة المدن والمجتمعات العمرانية الجديدة وتحليل أسباب عدم تحقيقها المستهدف منها، لبيان الاختلاف في أساليب الإدارة المتبعة وکيفية تأثير ذلک علي تحقيق المستهدف من إقامة المدن الجديدة في مصر. ويخلص البحث لتقديم حلول إلي کيفية تحقيق اللامرکزية الإدارية للمدن الجديدة من خلال حل المشکلات والمعوقات الأساسية التي تواجه إدارة وتنمية المدن الجديدة.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19430.html}, eprint = {https://jaes.journals.ekb.eg/article_19430_5ea53faab68f96834d295dc5779dd894.pdf} } @article { author = {فايد, حاتم}, title = {مستويات تحليل التعقيد الهندسى فى المناطق اللارسمية}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {830-855}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19431}, abstract = {The early studies of spontaneous settlements concluded that it has no order due to its fuzzy Geometrical structure, but the complexity theory changed the paradigm of research and scholars redefined the spontaneous settlements as a complex geometrical system. This paper aims to detect appropriate tools to analyze geometrical order of informal settlements. reviewing the precedent analytical trials   that studied the built environment in general, and focusing on informal settelments representing cases from Egypt, Saudi arabia,Turkey,india ,Brasil,  philippine and India. This paper is divided into three main parts, the first part compares between several studies that analyzed complexity of the built environment in general and detects four main approaches of analyzing complexity: Measuring degree of complexity, finding the nonphysical aspects of complexity, finding the generators of complexity and defining the structure of complexity. The second part discusses the four approaches and detects the tools for each of them. The last part compares the tools which were detected and formulate an appropriate methodology to understand complexity of informal settlements. البناء الهندسى للمناطق اللارسمية محاط بدرجة عالية من الغموض ، وکانت النظرة  السائدة أنها ذات بنية هندسية عشوائية لا تحمل أى نظام داخلى . إلا أن نظريات وعلوم التعقيد دفعت الباحثين لإعادة النظر إليها  کبنية معقدة  هندسيا . يهدف البحث إلى رصد أدوات تصلح لتحليل الترکيب الهندسى للمناطق اللارسمية . من خلال استعراض تجارب تحليل التعقيد الهندسى فى عدد من المناطق اللارسمية فى کل من  ترکيا والهند ومصر والسعودية والبرازيل  والفلبين بالإضافة لبعض الأمثلة من العمارة التاريخية . وبعض الأمثلة التى تدرس التعقيد الهندسى فى البيئة المشيدة بصفة عامة وينقسم البحث إلى ثلاثة أجزاء ، الجزء الأول يقارن بين مجموعة من الأبحاث التى درست التعقيد الهندسى فى البيئة المشيدة من شتى الزوايا ، ويتوصل البحث لأربعة مستويات مختلفة لدراسة التعقيد الهندسى فى البيئة المشيدة وهى: قياس درجة التعقيد - الأبعاد اللامادية ( الاجتماعية والسيکلوجية ) المصاحبة للتعقيد- منظومة التشريع کآلية مولدة للتعقيد - لغة النسق ، والجزء الثانى يناقش مستويات التحليل الأربعة ويرصد أدوات التحليل الخاصة بکل منها ، والجزء الأخير يقارن بين الأدوات التحليلية التى تم استخدامها فى المستويات الأربعة ويستخلص المنهجية المناسبة لتحليل الترکيب الهندسى للمناطق اللارسمية .}, keywords = {Informal settelments-complex geometry – Fractal geometry,Space syntax- Pattern language. المستقرات اللارسمية – هندسة التعقيد- الهندسة الکسرية- ترکيب الفراغ,لغة النسق}, url = {https://jaes.journals.ekb.eg/article_19431.html}, eprint = {https://jaes.journals.ekb.eg/article_19431_afdd06a590d4d8c90bef0073612ae41b.pdf} } @article { author = {شلبي, هايدي}, title = {التأثير البصري لثورة المعلومات والاتصالات علي الفراغات العمرانية}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {825-843}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19432}, abstract = {لقد أدت الطفرة الکبيرة التي حدثت في  تقنية المعلومات والاتصالات إلى التفکير للاستفادة من تطبيقات هذه التقنية في جميع أوجه الحياة، ولقد کانت لهذه التقنية تأثير کبير في العديد من المجالات وخاصة الفراغات العمرانية لقربها من احتياجات المستخدمين، ولما ترتبط                                                                                                                                                  به من تسهيل وتسريع حرکة الحياة مما يدعم حرکة التقدم والتنمية بالبلاد. وبالرغم من ظهور تطبيقات ثورة المعلومات في کثير من الدوائر والخدمات الحکومية (کالصحة والتعليم والإعلام) والاقتصاد (کالبنوک، التجارة الالکترونية) واعتمادها على نظم المعلومات ودعم اتخاذ القرار، إلا أن الفراغات العمرانية بالمدن المصرية لم تستفد بعد من تقنية (المعلوماتية)، کما إنها لم تعتمد عليها بعد بالشکل المطلوب مثل باقي مدن العالم. بالرغم من إن تأثيرها البصري علي الفراغات العمرانية المصرية أصبح ملحوظا بخلاف مدن العالم. کما أن هذه الفراغات الأقدر على الاستفادة من ثورة المعلومات لأنها الحيز المکاني الذي تتجسد به القطاعات التنموية الأخرى. کما انه من خلال استخدام تقنية المعلومات يمکننا وضع استراتيجيات عمرانية تواکب الطفرة التکنولوجية الحالية في مجالات التنمية العمرانية کما يحدث بالدول المتقدمة. وحيث ان الکثير من المتخصصين درس انعکاسات تکنولوجيا المعلومات على مجالات الحياة المختلفة فى العقود الاخيرة، لذا تظهر أهمية البحث في تناوله لتأثير ثورة المعلومات على الفراغات العمرانية بالمدن المصرية من الناحية البصرية، والتنبؤ بتأثير ذلک على مستقبل واستخدام وشکل العمراني للفراغات العمرانية المصرية والتفاعل بين البيئة المبنية والبيئة المعلوماتية. ومعرفة سلبيات وايجابيات هذا التفاعل مما يساعد علي تحسين ادراک المستخدمين للفراغ وتحقيق أعلى جودة أداء.  }, keywords = {(ثورة المعلومات,المعرفة,التنمية,تکنولوجيا الاتصالات,الفراغات العمرانية,النواحي البصرية)}, url = {https://jaes.journals.ekb.eg/article_19432.html}, eprint = {https://jaes.journals.ekb.eg/article_19432_a32036ab5814d69a846fc4ad77d30314.pdf} } @article { author = {محمد احمد ابو عوف, يمنى}, title = {نحو تطبيق تکنولوجي معاصر لمفردات العمارة التراثية فى إطار مفاهيم العمارة البيئية والاستدامة}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {745-759}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19435}, abstract = {التراث الثقافي المعماري* هو التعبير الصادق عن تاريخ وثقافة المجتمع ، وبذلک فالتراث تجسيد لقيم ثقافية وحضارية تعکس حضارات الشعوب بخصائصها الدينية والاجتماعية والثقافية والسياسية وبيئة اجتماعية واقتصادية عاشها الأجيال . ويضم التراث الثقافي عدة مجالات ومنها البيئة المشيدة المتمثلة في الإرث المعماري من المباني والمدن التاريخية . والغرض من البحث في مجال  التراث المعماري هو الاستفادة من الظروف التي أوجدته وطرق حلها وتقييم هذه الحلول من منظور علمي معاصر بغرض النمو بالبيئة المعاصرة والتکيف مع ظروف البيئة من أجل تأهيل تراثنا المعماري المتميز وتوضيح القيمة الحضارية للتراث في المجتمع والوعي الأثرى . ومن هنا ظهرت الحاجة للاهتمام بالعناصر التراثية التى نجحت فى التکيف مع الظروف المحيطة واستغلت مصادر الطاقة (کالشمس والرياح ...الخ ) استغلالا امثل فتم اختيار مواد بناء واساليب انشاء معتمدة على المؤثرات البيئية المحيطة ،العمارة التراثية هى تعبير صادق عن التاثيرات المناخية المحيطة بما تذخر به من مفردات تراثية تتضح بکثرة فى العصر الفرعونى والقبطى والاسلامى (کمثال للعصور المعبرة عن هوية شخصية للشعب المصرى ) وذلک بغرض التأکيد على الهوية المحلية لها وعدم طمسها أو إذابتها في ما يسمى بالعمارة العالمية . 2-المشکلة البحثية : في الماضي کانت هوية عمارة الشعوب واضحة وتعکس خصائص تلک الشعوب ومزاياه البيئية والاجتماعية .أما اليوم فإن الهوية قد تلاشت وذلک بفعل المفاهيم الغربية حيث غزت المباني العالية کافة مدننا فتکسرت أطواق الخصوصيات القطرية في العمارة مثلما تلاشت الخصوصية الذاتية في جوانب الحياة . ولکن المريب والمدهش حقا هو أننا کشعب متلقي لم نعد قادرين على تحليل المعطيات الوافدة والتبصير بها بدقة وبالتالى انتقاء النافع منها من اجل تحقيق الموازنة الصائبة بين المؤثرات الوافدة والموروثة مع الاستفادة من کل إفرازات التقنيات والتطورات المعاصرة ودمجها مع تاريخنا الحضاري وذلک لإيجاد هوية معمارية خاصة بنا . فطالما ارتبطت الهوية بالطاقة الداخلية للمبنى ونظام التهوية الداخلى به، عن طريق ربط المعالجات البيئية الموجودة فى التراث بامکانية استغلال حرکة الهواء والطاقة داخل فراغات المبانى* عن طريق التکنولوجيا الحديثة . وظهرت عدة مشاکل من اهما مشاکل الطاقة حيث تشير التقديرات والاحتمالات الى احتمال حدوث ازمة عالمية فى الطاقة 3-الهدف : يهدف البحث الى  : اعادة توصيف وتطوير للمفردات التراثية ذات الحلول البيئية فى اطار تکنولوجى يحافظ على الهوية ويضمن تطبيق مبادئ الاستدامة ويقلل الطاقة المستخدمة بالمبنى ويعتمد على طاقات متجددة بشکل اکبر صديق للبيئة 1- دراسة الحلول البيئية التراثية التي أفرزها التفاعل الإيجابي بين الإنسان وبيئته الطبيعية عبر الزمان، والتي تجلت في المظاهر والأنماط العمرانية والمعمارية المميزة في البيئة العربية. 2- تقييم وتحليل المنظومة البيئية المتکاملة للعمارة التراثية فى مصر ( فرعونية - قبطية - اسلامية) 3- تقييم التطور التکنولوجى بالمبانى وتاثيره على المنظومة البيئية للفراغ الداخلى}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19435.html}, eprint = {https://jaes.journals.ekb.eg/article_19435_13371d505a3ff7df801c3c4b3aa5ae66.pdf} } @article { author = {حسنين البليهى, شکرى}, title = {الفراغات العمرانية بالمدينة المصرية بين النظرية والتطبيق.}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {856-872}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19436}, abstract = {National strategic plan of Egypt aims to become Egypt a developed nation and a balanced society which maintains its national identity and religious values, where all citizens enjoy luxury and fineness of the life. In the past decades many studies revealed that extent of the urban deterioration – in general – andespecially the visual pollution in the Egyptian cities. This research aims to demonstrate the contrast between theory and practice in the Urban Spaces design, through the verification of using the Urban Spaces and streets furniture elements in El-Arish city as the largest city in Sinai in terms of the urban agglomeration and population, Which many studies have confirmed about the low level of the urban development and the large gap between the development plans and the current situation of the City. This research has concluded to emphasize importance of inclusion of the Urban Spaces and streets furniture elements within the items agenda, which has the execution priority, especially in the new cities and urban communities, which have a significant role in improving the visual image of the city, in order to make it more attractive and incentive to more Egyptians to residence it. As it recommended by stressing importance of respecting the laws, regulations, and scientific and technical references which organize the urban spaces and streets design plans, and are responsible for the visual image quality of the city, and the constant monitoring to the authorities performance which are responsible for executing the urban spaces & streets furniture plans. Also the need for continued update, develop and upgrade the staff technical performance, who responsible for giving the construction, renovation and maintenance licenses, and the activities permits which affect the visual image of the city, and ensure achieving it in equity, efficiency and compliance with the laws, regulations, and scientific and technical references. المخطط الإستراتيجى القومى للتنمية العمرانية لمصر يستهدف ان تصبح مصر دولة متقدمة و مجتمعاً متوازناً متمسکاً بهويتة الوطنية وقيمة الدينية، ويتمتع فيها المواطنون کافة برغد العيش و جودة الحياة. و فى العقود الماضية کشفت دراسات سابقة عديدة عن مدى التدهور العمرانى عموماً و التلوث البصرى خصوصاً بالمدن المصرية، و يهدف هذا البحث الى البرهنة على التباين بين النظرية والتطبيق فى تصميم الفراغات العمرانية، من خلال التحقق من استخدام عناصر فرش الفراغات العمرانية ومسارات الحرکة بمدينة العريش بإعتبارها أکبر مدن سيناء من حيث الکتلة العمرانية وعدد السکان، والتى اکدت دراسات عديدة على تواضع مستوى التنمية العمرانية بها، والهوة الکبيرة بين خطط تنمية المدينة و الوضع الحالى لها. و اوصت هذه الدراسةبضرورة إدراج عناصر فرش الفراغات العمرانية و مسارات الحرکة ضمن الأعمال التى لها أولوية التنفيذ، خصوصاً فى المدن و المجتمعات العمرانية الجديدة لما لها من دور کبير فى تحسين الصورة المرئية للمدينة، بهدف جعلها جذابة و محفزة لمزيد من المواطنين للإقامة بها. کما اوصت بالتشديد على أهمية احترام القوانين واللوائح والمرجعيات العلمية والفنية المنظمة لمخططات تنسيق الفراغات العمرانية ومسارات الحرکة، و المسئولة عن جودة الصورة المرئية لمدينة العريش خصوصاً و المدن المصرية عموماً.، والمتابعة المستمرة لأداء الأجهزة التنفيذية المسئولة عن تنفيذ المخططات المتعلقة بتنسيق و تنظيم الفراغات العمرانية و مسارات الحرکة بالمدينة.، وايضاً ضرورة استمرار تحديث وتطوير و رفع مستوى أداء الکوادر الفنية المسئولة عن إعطاء تراخيص البناء و التجديد و الصيانة و ممارسة الأنشطة التى تؤثر على الصورة المرئية للمدينة، و ضمان انجازها بعدالة و کفاءة و توافقها مع القوانين والمرجعيات العلمية والفنية.}, keywords = {urban design,Visual Pollution,Urban Spaces And Streets Furniture,Building Laws,Professional Ethics. التصميم العمرانى، التلوث البصرى ، فرش الفراغات العمرانية، قانون البناء، الأخلاق المهنية}, url = {https://jaes.journals.ekb.eg/article_19436.html}, eprint = {https://jaes.journals.ekb.eg/article_19436_af72b442f09e9ca62932aa1779cfe8e5.pdf} } @article { author = {Mosaad, Gihan and Darwish, Nour and Tarabieh, Khaled}, title = {PROPOSAL OF A RATING SYSTEM: FOR A TOURISTIC GREEN COMMUNITY IN EGYPT}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {642-655}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19437}, abstract = {Sustainable design becomes mandatory as a result of environmental requirements as it improves sustainability in planning at the same time. Rating systems has started to be a tool to manage and asses the performance in many countries in the world. Furthermore the lack of a community rating system in Egypt has affected the cities and tourism potential as well, knowing that the Egyptian touristic sector is a rapidly growing industry. To manage the performance of the touristic communities, a rating system applicable in Egypt was developed. The findings of the research suggest that the customized applicable rating system in touristic cities has great resiliency within the existing local community. The aim of the paper is to present a new custom rating system to reduce the environmental load of the tourist community in Egypt. The research aim to focus on the investigation of livable community performance assessment for touristic cities to set a new criterion that follow the guidelines of site and urban development, green infrastructure, efficient energy, green transportation and sustainable tourism while protecting human’s rights. This paper sets a new proposal of an Egyptian rating system to achieve better environmental, social, economic and touristic performance of communities. The research objective is to encourage the resort operators and developers to utilize green standards, evaluate options and assess the level of their touristic communities.}, keywords = {Rating System,Communities,Green Touristic Communities,Environmental Community,tourism,Touristic Cities}, url = {https://jaes.journals.ekb.eg/article_19437.html}, eprint = {https://jaes.journals.ekb.eg/article_19437_e4ce2ba2103eab995e9f04a37416a3ca.pdf} } @article { author = {Ibrahim, Mohamed and abd elhamed, samara}, title = {MANAGEMENT OF GREEN BUILDING DESIGN}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {656-664}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19438}, abstract = {The Green Building Revolution Is Sweeping across The World. It’s A Revolution Inspired by an Awakened Under- Standing of how buildings use resources, affect people, and harm the environment. this revolution is further fueled by the knowledge that the world has little time to respond to the growing dangers of climate change, especially global warming, and that buildings play a huge role in causing carbon . one of the first steps in the green Design process is to establish firm Environmental Goals For The Project. It Is Important To Set Specific Measurable Goals for Things Like Energy Efficiency, Water Conservation, On-Site Treatment of Rain Water And Storm Water, Material And Resource Management, Construction Waste Management. And we can discover the Benefits of Green Building In Light Of Climate Change throw Mitigation and Adaptation Study The Green Building Design Process And Principles, The Research Discuss Integrated Design Process In General, Green Building Design Principles Are Building Shape And Orientation, Building Envelope (Heat Insulation And Building Density) And Solar Protection. ,Rating systems for green building and BIM technology to study building performance and its indictors are applied in a 3 case studies}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19438.html}, eprint = {https://jaes.journals.ekb.eg/article_19438_c3de2c21485c31e0cd225c6e61ee2643.pdf} } @article { author = {قاسم, مجدى}, title = {تأثير التلوث البصرى على الطابع المعمارى دراسة حالة منطقة روکسى بمصر الجديدة}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {810-828}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19439}, abstract = { تمتلک مصر العديد من المناطق التى تتميز بالطابع المعمارى و العمرانى المميز و الذى يندرج تحت المناطق التراثية و ذات القيمة و التى يجب أن نحافظ عليها و نعتنى بها , ولکنه نرى العديد من مظاهر التعديات عليها والتى سيوضحها البحث والتى تؤثر على تلک المبانى و المناطق بحيث تشوه منظرها مما تؤدى الى تلوث بصرى وهذا ما يتناوله البحث فى معرفة معنى التلوث البصرى و أنواعه و مصادره و أشکاله و المشاکل التى تتعرض لها المبانى و معرفة الأخطار و الحلول المقترحة للحد من التلوث البصرى و مدى تأثيره على المبانى سواء المبانى الموجوده فى شوارعنا أو المبانى ذات القيمه و المميز طابعا والتى بنيت فى أوقات سابقة و ذات تاريخ, کما يتناول البحث معرفة معنى الطابع المعمارى و أهميته و القيم و المعايير الخاصة بها و تصنيف المناطق ذات الطابع و من هنا سيتناول البحث بإيجاز تأثير التلوث البصرى على المبانى ذات القيمه و التى تتميز بالطابع المعمارى وکيفية معالجتها , کما سيتناول البحث بالدراسة الميدانية تطبيق ذلک على أحد المناطق ذات الطابع المعمارى المميز وهى منطقة مصر الجديدة بصفة عامة و سيتناول بصفة خاصة منطقة روکسى و المحيط بها لما تمثله من منطقة حيوية بمصر الجديدة و سيتم معرفة تأثير أشکال التلوث البصرى على مبانى تلک المنطقة و معرفة السلبيات  وذلک بهدف وضع حلول مقترحة لمعالجة أشکال التلوث بصورة عامة و وضع مقترحات للحل لمنطقة روکسى بصفة خاصة يمکن من خلالها الوصول الى حل مناسب يحقق بيئة عمرانية مميزة لتلک المنطقة .   }, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19439.html}, eprint = {https://jaes.journals.ekb.eg/article_19439_027b24b10659620ebb5222b86d199bbb.pdf} } @article { author = {سعيد عبد المجيد, خالد}, title = {توثيق التراث العمراني باستخدام تقنيات الواقع الافتراضي – الفرص والتحديات}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {882-893}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19440}, abstract = {تمثل عملية توثيق التراث العمراني أحد الإجراءات الأولية الهامة في منظومة الحفاظ على التراث العمراني واستدامته إذا تعرض للتلف أو للتهدم أو للاندثار، وتتمثل أهمية هذا البحث في کونه محاولة للتعرف على إمکانية استخدام التقنيات المختلفة لتوثيق التراث العمراني مع الترکيز على تقنيات العمارة الافتراضية والواقع الافتراضي کأداة توثيق وإظهار ثلاثية البعد للتراث المعماري والعمراني بالإضافة إلى ما يمکن أن تلعبه عملية التوثيق هذه من أدوار تتجاوز ذلک. ويتمثل السؤال المحوري للبحث في ماهي أهم الفرص التي يتيحها استخدام تقنيات الواقع الافتراضي في توثيق المباني والبيئات التراثية والتحديات التي تواجه هذا الاستخدام؟، هذا بالإضافة إلى بعض الأسئلة الثانوية التي تقود لتقديم إجابة على هذا السؤال. ويتمثل الهدف الرئيسي للبحث في تقديم إجابة على السؤال المحوري للبحث من خلال دراسة الفرص التي تتيحها عملية استخدام تقنيات الواقع الافتراضي في توثيق المباني والبيئات التراثية والتحديات التي تواجه هذا الاستخدام بالإضافة الى بعض الأهداف الفرعية المتمثلة في تقديم إجابات على الأسئلة الثانوية للبحث. ويستخدم البحث المنهج الوصفي التحليلي في دراسة التکنولوجيات المستخدمة في عملية توثيق المباني والبيئات التراثية، ثم وصف التطور في مجال الواقع الافتراضي والبيئات الافتراضية ومتطلباتها ومجالات تطبيقها المختلفة. يلي ذلک وصف وتحليل تجارب استخدام العمارة الافتراضية لمحاکاة وتوثيق التراث المعماري والعمراني. ثم استخدام المنهج الاستقرائي في استقراء الفرص والتحديات التي تواجه الاستفادة من التوثيق الإلکتروني للبيئات التراثية بتقنيات العمارة الافتراضية. ولتحقيق الهدف من البحث، فأن الدراسة تتناول مقدمة فيها أهمية البحث والتساؤلات البحثية وهدف البحث، ثم تتناول الدراسة التکنولوجيات المستخدمة في عملية توثيق المباني والبيئات التراثية، ثم الواقع الافتراضي والبيئات الافتراضية ومتطلباتها ومجالات تطبيقها المختلفة ثم تجارب استخدام تقنيات الواقع الافتراضي لمحاکاة وتوثيق التراث المعماري والعمراني. وتختتم الدراسة بمناقشة لأهم الفرص والتحديات التي تواجه الاستفادة من التوثيق الإلکتروني للبيئات التراثية بتقنيات العمارة الافتراضية.}, keywords = {التراث العمراني – استدامة التراث – تقنيات توثيق التراث – الواقع الافتراضي}, url = {https://jaes.journals.ekb.eg/article_19440.html}, eprint = {https://jaes.journals.ekb.eg/article_19440_883d25e846891a34d1ed7d2e7c8f688b.pdf} } @article { author = {إبراهيم مسعود, أسامة and محمد عبد الهادي, محمد and محمد علي, أحمد}, title = {تطبيق مبادئ العمارة الخضراء لتوفير الطاقة بالمباني التجارية المعاصرة}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {825-843}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19441}, abstract = {Since the United Nations Conference, which was held under the title of "Earth Summit" in 1992, striving for achieving sustainable development must also include a complete realization for fulfilment buildings and towns which is characterized by sustainability principle, after the conference lots of serious global trends began to appear and tried to accomplish with the environment and these trends called contemporary trends of enviromental design, one of the most important trends is "green architecture" which focuses on the relationship between buildings and natural, this trend appeared as a reaction for facing the enviromental problems and health risks which occurred becaused of the buildings which have no environmental dimension in their designs or the importance of keeping  the energy and the natural resources. One of those buildings that is energy consumer are commercial buildings and that is our search axis, most of commercial buildings nowadays disregards weather and its effect, also the cooling purpose increases the energy consumption, on the other hand the problems of the rapid depletion of energy appears, because of the continuous need for energy to design and coexistence inside the commercial buildings but all the time this energy is being wasted because of users or wrong design of building which make it exhauster for energy during the time, when we can figure out that it is possible with little effort and time to study how to improve the efficiency of energy used in building or decrease the waste of energy in return for energy saving and consumption regulation, here comes the importance role architectural designer to solve this problems, and there are lots of desirable trends provides using the new and rentable energy (like sun energy and wind energy) which cope up with the basics and principles of green architecture which is environment-friendly, and all of that just to provide the current needs of energy and try to save it or finding an future alternative. And as a extraction for the basics and principles of green architecture lots of real goals were resulted for this trend like achieving good thermal environmental for users and also good ventilation and natural lighting and that can be done by using many application and environmental processors to help rationalize consumption the energy and means of modern mechanical treatments to produce energy in clean and renewable way, also to be environment-friendly and that is the mean goal of that research which aims to create a commercial building tandem with enviroment and comfortable for its users to help them doing their daily activities in a convenient way.                 منذ انعقاد مؤتمر الأمم المتحدة، تحت عنوان "قمة الأرض" عام 1992، أصبح السعي من أجل تحيق التنمية المستدامة ينطوي أيضا على السعي من أجل تحقيق مدن ومباني تتسم بمبدأ الاستدامة، وبدأت تظهر منذ ذلک الحين إتجاهات عالمية جادة للتکامل والتوافق مع البيئة سميت بالاتجاهات المعاصرة للتصميم البيئي، ومن أهم هذه الإتجاهات اتجاه تصميمي جديد ظهر تحت مسمي "العمارة الخضراء" وهو يرکز على أهمية العلاقة بين المباني والطبيعية، وظهر هذا الإتجاه کرد فعل لمواجهة المخاطر والمشکلات البيئية والصحية والتي نتجت کرد فعل طبيعي للمباني التي لم يُراعي في تصميمها البعد البيئي وأهمية الحفاظ على الطاقة والموارد الطبيعية. ومن هذه المباني المستهلکة للطاقة هي المباني التجارية محور البحث، حيث تجاهلت العديد من المباني التجارية المعاصرة المناخ وعوامله وأزداد استنزاف الطاقة والموارد لغرض التبريد، ويظهر على الجانب الآخر مشکلة النضوب السريع للإمدادات من الطاقة المستخدمة، فإلى جانب الاحتياج الملزم من الطاقة للتصميم والتعايش داخل المباني التجارية، إلا أن معظم هذه الطاقة مهدره لسوء الاستخدام من قبل المستعملين او نتيجة للتصميم الخاطئ للمبنى بما يجعله مستنزف للطاقة لجميع مراحله العمرية بصوره کبيره، وعند معرفة أنه يمکن بقليل من الوقت والجهد دراسة کيفية تحسين کفاءة استخدام الطاقة بالمباني أو لتقليل الهدر فيها في مقابل توفير کبير للطاقة أو تنظيم استهلاکها، تظهر أهمية دور المصمم المعماري لعلاج مثل هذه المشکلة، وتظهر في المقابل اتجاهات أکثر جاذبيه بإمکانية اللجوء الى استخدام الطاقات الجديدة والمتجددة (کطاقة الشمس وطاقة الرياح) المطبقة لمبادئ وأسس العمارة الخضراء صديقة البيئة، لکي تسد الاحتياجات الحالية للطاقة مع ضمان عدم نفاذها أو مع ضمان توفير البديل المستقبلي لها. واستخلاصا لمبادئ وأسس ومعايير العمارة الخضراء، نتجت الأهداف الحقيقة لهذا الإتجاه وهي تحقيق بيئة حرارية جيدة للمستعملين مع تحقيق التهوية الجيدة وکذلک الإضاءة الطبيعية غير المبهرة، وذلک بتطبيق عدة وسائل ومعالجات بيئية تساعد على ترشيد استهلاک الطاقة ووسائل ومعالجات ميکانيکية حديثة ليساعد على انتاج الطاقة بصورة متجددة ونظيفة وصديقة للبيئة وهذا هو الهدف الحقيقي لهذا البحث وذلک لإنتاج مبني تجاري متوافق بيئيا ومرشدا للطاقة ومريح لمستعمليه ليساعدهم ع لى تأدية نشاطهم اليومي بشکل مريح.}, keywords = {Environmental Design,Green Architecture,new and renewable energy,Commercial building eco-friendly. التصميم البيئي,العمارة الخضراء,الطاقة الجديدة والمتجددة,المبني التجاري صديق البيئة}, url = {https://jaes.journals.ekb.eg/article_19441.html}, eprint = {https://jaes.journals.ekb.eg/article_19441_c96d016f5cea72095ed018fd739546f0.pdf} } @article { author = {حامد القطان, أحمد and قاسم, مجدى}, title = {نحو مفهوم معاصر للاستدامة البيئية في العمارة الإسلامية}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {790-809}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19442}, abstract = {تعکس العمارة العديد من الأفکار والاتجاهات والأنشطة المجتمعية المختلفة لتصبح بذلک محصلة لمجموعة من المدخلات والمعايير التي تعبر عن الفکر الإنساني الذي يخدم البشرية في حاضرها ومستقبلها، لذلک تعتبر العمارة هي السجل الزمني والمرآة التي تعکس ثقافة وعادات وتقاليد والتقنيات المتاحة للمجتمع. وتعتبر الاستدامة البيئية من المصطلحات الحديثة التي استخدمت على نطاق واسع وعلى کافة الأصعدة الاقتصادية والاجتماعية والبيئية وحتى السياسية، وحيث کانت قضايا البيئة والعمران هي المحرک الأساس لهذا الفکر، فقد ظهرت على مدى السنوات الماضية العديد من المحاولات لتقنين وتطبيق هذا الفکر، على شکل أدلة ومعايير، وهو ماحاول البحث التعامل معه بدافع الاکتشاف والتأصيل. بعد ذلک تم الانتقال إلى دائرة أصغر وأدق، وهي تشريح لأحد أشهر وأهم الأدلة والمعايير العالمية وهي معايير LEED (معايير في الطاقة والتصميم البيئي Leadership in Energy and Environmental Design)، والتي قننت مفهوم الاستدامة البيئية، بل فرضته کقانون في کثير من دول العالم، حتى وصل الإلزام بتطبيقه لبعض الدول العربية وغيرها، وبذلک تحقق جزء مهم من أهداف البحث، وهو استکشاف ما يهمنا من مفهوم الاستدامة. ولکون البحث يهدف إلى مفهوم معاصر للاستدامة البيئية في العمارة الإسلامية، فقد تم اختبار "معايير LEED" مع مفاهيم وأساليب "العمارة الإسلامية". ورغم صعوبة إجراء الاختبار بين نوعين مختلفين من البيانات؛ الأول منها محدد التفاصيل في 30 عنصرا، هي عناصر LEED، المغرق في التقنية الحديثة، بينما الآخر-الاستدامة في العمارة الاسلامية-عبارة عن مفاهيم وتطبيقات تحقق الاستدامة، في العديد من الکتب والدراسات، إلا أن إجراء هذا الاختبار قد أثبت أن العمارة الإسلامية قد تعاملت مع قضايا الاستدامة بکل اقتدار، وغطت معظم جوانبها.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19442.html}, eprint = {https://jaes.journals.ekb.eg/article_19442_898c07952697443a90b9067d451f6764.pdf} } @article { author = {أحمد عرفه, رزان}, title = {تطور مباني المستشفيات خلال القرن العشرين والواحد والعشرين}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {894-903}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19443}, abstract = {Due to the recognition of contemporary societies to the importance of the good health for the individual and community, that increased the interest of providing the individual`s health care services at various levels. The hospital building is characterized by fast and successive developments that appeared due to several scientific events and medical researches which leads to the appearing of hospital`s new career requirements that makes it one of the most complex and massive public buildings. The variables of medical, science and technology produced in mutations and changes of health caring and treatment methods which made changes in the diagnostic and therapeutic concept that in turn is reflected in the hospital`s design. من خلال إدراک المجتمعات المعاصرة لأهمية الصحة الجيدة للفرد والمجتمع، فقد زاد الاهتمام بتوفير خدمات الرعاية الصحية اللازمة للأفراد على مختلف المستويات. مبني المستشفى يتميز بالتطورات المتتابعة والسريعة التي ظهرت نتيجة احداث علمية متعددة وابحاث طبية ينشأ عنها متطلبات وظيفية جديدة جعلته من أکثر المباني العامة ضخامة وتعقيدا، فالأحداث والمتغيرات العلمية والطبية ثم التکنولوجية مثلت عوامل مسببه لإحداث طفرات وتغييرات في وسائل العلاج والرعايا الصحية، ومن ثم احدثت تغييرات في المفهوم التشخيصي والعلاجي الذي انعکس بدوره على تصميم المستشفى.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19443.html}, eprint = {https://jaes.journals.ekb.eg/article_19443_8ed71d62fcb4c742d01c21677b843b26.pdf} } @article { author = {أحمد عرفه, رزان}, title = {العمارة والنانو تکنولوجي}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {904-912}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19444}, abstract = {The "Nanotechnology" caused a revolution in interior design and architecture field , To know the extent of development and the amount of changes happened ,we have to know the role of the “nanotechnology” in developing material which produced in the developing of construction methods , finishing materials and the building`s  internal and external form that gives the designer solutions and effects that weren’t be existed before , and this surely is like a starting point which its massive effect will appear through the next two decades . The following we will review the effect of "Nanotechnology" in changing and developing the characteristics of materials used in architecture and interior design, with some mentions of nanotechnology applications.  أحدثت تکنولوجيا النانو ثورة في مجال العمارة والتصميم الداخلي ولمعرفة مدى التطور ومقدار التحولات الحادثة کان لابد لنا من معرفة الدور الذي تلعبه "النانوتکنولوجي" في تطوير تکنولوجيا المواد والذي أدى بدورة إلى تطوير أسلوب الإنشاء ومواد النهو وشکل البناء خارجيا وداخليا مما منح المصمم حلول وتأثيرات لم تکن مطروحة قبلا. وهذا بالطبع هو بمثابة بداية سيظهر أثرها الضخم خلال العقدين القادمين. وفيما يلي سنستعرض أثر "النانوتکنولوجي"في تغيير وتطوير خصائص بعض المواد المستخدمة في مجال العمارة والتصميم الداخلي، مع ذکر بعض تطبيقات النانوتکنولوجي.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19444.html}, eprint = {https://jaes.journals.ekb.eg/article_19444_83eab6f3675cabc328b6a736794fe624.pdf} } @article { author = {Henigal, Ashraf and Elbeltgai, Emad and Eldwiny, Mostafa and Serry, Mohamed}, title = {ARTIFICIAL NEURAL NETWORK MODEL FOR FORECASTING CONCRETE COMPRESSIVE STRENGTH AND SLUMP IN EGYPT}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {435-446}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19445}, abstract = {Slump and compressive strength of concrete are commonly used criteria in evaluating fresh and hardened concrete. Accordingly, prediction of such criteria is important for the quality assurance of the produced concrete. In this paper, a Neural Network (NN) model is developed to predict concrete compressive strength and slump in Egypt. The Artificial  Neural Network (ANN) model is developed, trained and tested using 1000 different concrete mixes gathered from different batch plants distributed all over the Arab Republic of Egypt. Important parameters that have noticeable effect on the compressive strength and slump are identified and used as the inputs for the ANNs model. The developed model can be used either to predict the compressive strength and slump for a given mix or to estimate the different ingredients to achieve a targeted compressive strength after seven and twenty eight days. To verify the results of the ANNs model, seventeen concrete samples are prepared and tested at laboratory and the same ingredients of the mixes are used to predict the strength and slump using the developed ANN model. The Root Mean Square Error (RMSE) of the results for the slump and the compressive strength after 7 and 28 days equal 3.74, 1.79 and 3.05, respectively. These results showed the ability of the developed ANNs as an effective tool to predict and estimate the compressive strength and slump of concrete in Egypt. The analysis of the test results leads to the conclusion that this idea can be used for the development of valid systems for specifications and standards.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19445.html}, eprint = {https://jaes.journals.ekb.eg/article_19445_b60e3e4fc96eedd7b3e4caba15e59508.pdf} } @article { author = {AlJubaely, Ranim and Soliman, Ahmed and Hamed, Khaled and El-Zawahry, Alaa}, title = {DAM SITE SELECTION USING GIS-BASED AHP-OWA APPROACH CASE STUDY: EL KEBIR SHEMALY RIVER, SYRIA}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {447-457}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19446}, abstract = {Dam site selection is not a new problem; the traditional methods for solving this problem are costly and time consuming. Nowadays, advancement in technologies allows us to utilize maximum resources at optimum cost. Geographic Information System (GIS) based multicriteria decision analysis approaches are the common methods used for solving this type of problem. In this research, to locate potential dam sites along El KebirShemaly River, the criteria of slope, soil, geology, landuse, rainfall, drainage network, distance from road, and distance from target area were developed and implemented. The approach is based on the extension of Analytical Hierarchy Process using fuzzy quantifiers guided by Ordered Weighted Averaging operators (GIS-based AHP-OWA). The outcomes indicate that the developed criteria were sensitive to physical, hydrological, environmental and economical settings on the study area. Furthermore, by changing the linguistic quantifiers, the GIS-based AHP–OWA can generate a wide range of decision strategies. الطرق التقليدية في اختيار مواقع السدود مکلفة وتتطلب مجهوداً کبيراً. لکن التطور التکنولوجي يمکننا من استخدام تقنية  نظم المعلومات الجغرافية وAHP-OWA  اللتان تعتبران الطريقتين الأکثر شيوعاً في حل مثل هذا النوع من المسائل. في هذا البحث استخدمنا  ميل الحوض، نوع التربة، صلابة الجيولوجية السطحية, استخدامات الأراضي، توزع الأمطار، شبکة التصريف النهري, المسافة إلى الطرق، والمسافة للمناطق المخدمة کمعايير لاتخاذ قرار تحديد المواقع الممکنة للسدود على نهر الکبير الشمالي في سوريا. هذه التقنية تظهر تأثير المعايير البيئية والاقتصادية والهيدرولوجية في تحديد موقع السد. کما تسمح هذه التقنية باستخدام التعابير اللفظية في إتخاذ القرار وبالتالي تعطي مجالاً واسعاً من سيناريوهات اتخاذ القرار.}, keywords = {Dam Site Selection,geographic information system (GIS),Analytical Hierarchy Process (AHP),And Ordered Weighted Averaging (OWA),MCDA}, url = {https://jaes.journals.ekb.eg/article_19446.html}, eprint = {https://jaes.journals.ekb.eg/article_19446_4345423ae068bd0c742e9804f5598bed.pdf} } @article { author = {Hassan, Abeer and Galal, Sameh and Abd Eltawab, Adel}, title = {HYPER-SALINE SOLUTION OF QARUN LAKE (MAGNESIUM CHLORIDE) TO CONTROL DUST FROM UNPAVED ROADS AT FAYOUM, EGYPT}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {459-467}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19447}, abstract = {Magnesium chloride is a naturally occurring material and is extracted from salt-water in Qarun lake at the Egyptian salts and minerals Co. in Fayoum, Egypt such as those found in seawater. Magnesium chloride can be adapted and designed to provide highest efficiency depending on prevailing dust conditions, anticipated traffic, and type of soil in Fayoum roads. Dilution can also be varied to obtain the greatest possible economy and minimize environmental impact. This soil may be best treated with a Magnesium chloride. The paper includes discussion on the extent of unpaved roads, the consequences of dust, categorization of road additives, and a way to dust control. The effect of  on the physical and mechanical properties of soils was evaluated in the laboratory. First, the physical and chemical properties of the soil sample were determined. Next, the swell percentage, California bearing ratio and indirect tensile strength tests were performed at different curing times on samples with and without the additive by compressing the sample to achieve particular compaction characteristics.  The results show that dispersive and expansive clay soils can be effectively improved using an additive  solution.}, keywords = {Magnesium chloride,Dust Treatment,Road Additives,Unpaved Roads,Road Stabilizers And Road Erosion}, url = {https://jaes.journals.ekb.eg/article_19447.html}, eprint = {https://jaes.journals.ekb.eg/article_19447_d20a9d207897e1e6d0d6fc3da05e3c36.pdf} } @article { author = {Mohamed Shanan, Mohamed and Hasan Anis, Ahmed and El-Zanati, Ashraf and Metwally, Kamal}, title = {NON LINEAR FINITE ELEMENT ANALYSIS FOR NORMAL AND HIGH STRENGTH CONCRETE COLUMNS CONFINED BY RECTANGULAR TIES}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {469-480}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19448}, abstract = {This paper presents a nonlinear finite element analysis of normal and high strength reinforced concrete columns confined with rectangular ties under axial compressive loading. The paper presents a nonlinear finite element analysis for nineteen normal strength  concrete rectangular columns with different concrete dimensions, different concrete strength and confinement characteristics. These specimens were tested by the author and a set of another twenty high strength concrete square columns were tested by other researchers. ANSYS 15 Finite Element Software was used in this study. Concrete was modeled with eight nodes SOLID 65 element that can be translated either in the x, y and z axis directions. Longitudinal and transverse reinforcement were modeled as discrete element using 3D-link 180 element type. The nonlinear requirements for each material were implemented in the modeling. The results indicated that the axial force – axial strain relationship obtained from the analytical model using ANSYS are closely matched with the experimental data. The comparison shows that the ANSYS is capable of modeling and predicting the actual nonlinear behavior of confined normal and high-strength concrete columns under concentric loading. The maximum applied load and the maximum strain have also been confirmed to be satisfactory. Depending on this agreement between the experimental and analytical results, a parametric numerical study can be done by ANSYS 15 to clarify and evaluate the effect of confinement variables on the strength of normal and high strength reinforced concrete columns confined with rectangular ties under axial compressive loading.}, keywords = {ANSYS, Strength,Confinement,Nonlinear finite element analysis,Nonlinear behavior}, url = {https://jaes.journals.ekb.eg/article_19448.html}, eprint = {https://jaes.journals.ekb.eg/article_19448_5122dbe2f6ea3cde55e76e8bbc1a180b.pdf} } @article { author = {Mohamed Shanan, Mohamed and Hasan Anis, Ahmed and El-Zanati, Ashraf and Metwally, Kamal}, title = {EXPERIMENTAL PROGRAM FOR REINFORCED CONCRETE RECTANGULAR COLUMNS CONFINED BY RECTANGULAR TIES}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {481-491}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19449}, abstract = {This paper presents an experimental study of the behavior of reinforced concrete rectangular columns confined by rectangular ties under concentric loading. The study incorporates all the relevant parameters of confinement that have been observed to play important roles in column tests. These parameters include the concrete compressive strength, amount of confinement reinforcement, the tie spacing, the tie yield strength, longitudinal reinforcement distribution, the transverse reinforcement configuration and section geometry. Nineteen normal strength concrete rectangular columns with different concrete dimensions, different concrete compressive strength and confinement characteristics were designed, constructed and tested in this research. Significant gains in strength and ductility are recorded for the concrete core of well confined columns.}, keywords = {Strength,Confinement,Ductility, Transverse Reinforcement Effect, Experimental Program}, url = {https://jaes.journals.ekb.eg/article_19449.html}, eprint = {https://jaes.journals.ekb.eg/article_19449_42446273d1630ea2fcabed60d26d0585.pdf} } @article { author = {Khalil, Ayman and Nabil, Mohamed and Naguib, Karim}, title = {BEHAVIOR OF PRECAST BEAMS JOINTS IN BRIDGES}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {495-506}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19450}, abstract = {In the last few decades, precast concrete has become strongly recommended for the most types of bridges construction due to time saving, quality control and concrete members consistency. In bridges construction, precast concrete elements are connected together in order to achieve bridge deck integrity and stability; joints between these elements shall be able to transmit all internal forces due to service loads safely. The presented paper introduces an experimental study of the performance of stitching joint between precast beams and determines if this detail could generate a precast deck system that could emulate the monolithic cast-in-place deck systems without any advantages to stitching concrete joint over monolithic one regarding material properties. In this respect, an experimental program was conducted on six specimens which were tested to failure under a static vertical load. Three specimens of monolithic cast-in-place beam to beam connection and three specimens of precast beams with stitching joints were tested using three different positions of vertical load to simulate flexural tension or diagonal tension shear failures. Results obtained by experimental work indicated that stitching joints have a reduced flexural capacity compared with monolithic joints, while two types of joints have the same shear capacity.  }, keywords = {bridges,Precast concrete,Cast-In-Place,Joints Details,Stitching Joint,Monolithic Joint}, url = {https://jaes.journals.ekb.eg/article_19450.html}, eprint = {https://jaes.journals.ekb.eg/article_19450_a0e55db34a75fdcc1d9cf168615ce5e0.pdf} } @article { author = {Ibrahim Fouad, Randa and zaher, Amr and Hilal, Khaled and Ezzat, Aiman}, title = {EXPERIMENTAL INVESTIGATION FOR MECHANICAL PROPERTIES OF FOAM BALLS LIGHTWEIGHT CONCRETE}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {507-522}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19451}, abstract = {Researchers and industrialists' interest in foam balls lightweight concrete (FBLWC) to be used in structural applications is steadily increasing, since the increase in demand for structures are light in weight. FBLWC is currently believed to have a promising future. It was restricted to use as partition wall, thermal insulation and rehabilitation work in the past. In the last few decades with the understanding of the phenomenon underlying (FBLWC), efforts have been made to use it in structural application. A new kind of LWC was developed for foam balls lightweight concrete, in which conventionally aggregates is partially replaced by polystyrene foam particles, which combined the advantages of normal density concrete, cellular concrete and high workability [3]. The main objective of the research was to investigate and evaluate the mechanical properties of (FBLWC). The investigation focused on studying the compressive strength, tensile splitting strength, modulus of elasticity, stress-strain relationship in (compression and tension) and tension stiffening effect. The research work included includeeeeeekKOPOFPF;LL;D, an experimental and a numerical phase. The experimental program included the testing of (FBLWC) specimens under concentric axial load in both tension and compression to obtain the actual stress strain properties of the produced FBLWC. This study showed that the use of foam balls in lightweight concrete clearly reduced the density of the concrete from 24.00 kN/m3 to 18.45 kN/m3 which represented a reduction of 23%. The average compressive strength for cube specimens was 27 MPa. And the average compressive strength for the cylinder specimens was 22.4 MPa.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19451.html}, eprint = {https://jaes.journals.ekb.eg/article_19451_dfceae7ae3602c97fef8fcb057830cce.pdf} } @article { author = {Al Haidar, Waleed and Al Hakim, Ahmed and Hozayen, Hozayen}, title = {CHARACTERIZATION OF TRAFFIC PATTERNS IN URBAN AREAS -KUWAIT MODEL AS A CASE STUDY}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {591-600}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19452}, abstract = {Combining traffic assignment models and intersection delay functions into a single modeling framework could provide reliable representation of the travel times and route choices and accordingly improve the overall transportation planning process. This paper examines a proposed methodology for combining the traffic assignment models with intersection delay functions on realistic network in interaction with varying levels of congestion. For this aim the well-known HCM 2010 Formulas are used in order to calculate the delays for each turn movements. In addition, a commercial computer-aided transport planning called “VISUM” established at the PTV System Software and Constructing Gmbh Karlsruhe-Germany is used. To facilitate the calculations, an interactive computer program is developed. The proposed methodology is applied on the entire road network of Kuwait City Cente which is part of the city of Kuwait. As a consequence of the applied method, the accuracy of the List area model was raised significantly. The proposed methodology which includes the intersection delay models showed improvements of about 4%, 6%, 9% and 13% in comparison with the traditional traffic assignment methods. Further efforts should be directed toward implementing the modeling framework presented in this paper on larger and more realistic networks.  يهدف هذا البحث إلى إعداد طريقة منهجية قابلة للتطبيق العملي تتضمن دمج نماذج التخصيص ونماذج التأخيرات المتولدة عند التقاطعات في نموذج عملي واحد. لتحقيق هذا الغرض تم دمج النماذج الرياضية المتاحة بدليل سعة الطرق الأمريکية HCM 2010 مع برنامج  VISUMالمستخدم في تخصيص الرحلات على شبکات الطرق ، وذلک لإمکانية أخذ التأخيرات عند التقاطعات في الاعتبار. ولاختبار مدى فاعلية المنهجية المقترحة فقد تم تطبيقها عن طريق تخصيص مصفوفة رحلات حالية (سنة الأساس) على جزء من شبکة طرق بمدينة الکويت. وتم افتراض أربع تصورات مختلفة لحجم الطلب على النقل فى المستقبل لحالات متنوعة. وقد أظهرت النتائج أنه عند استخدام المنهجية المقترحة تختلف النتائج عن مثيلاتها في نماذج التخصيص التقليدية بدون إدماج أزمنة التأخيرات، بنسب تصل إلى 4%, 6%, 9%، 13% للتصور الأول، الثاني، الثالث والرابع على الترتيب. وفى النهاية يوصى الباحث بضرورة تطبيق المنهجية المقترحة على عدد أکبر من الشبکات ذات الخصائص والأحجام المختلفة، وذلک من أجل الوصول إلى مقاييس يمکن تعميمها لمساعدة مخططي النقل في الحصول على نتائج أکثر دقة في عملية التخصيص ومن ثم زيادة دقة عملية تخطيط النقل بصفة عامة.                                                                                                 }, keywords = {traffic,Signal,model,Model Split,Delay,Transport Demand,Actuated Traffic Signals,Traffic Assignment,Reliability}, url = {https://jaes.journals.ekb.eg/article_19452.html}, eprint = {https://jaes.journals.ekb.eg/article_19452_030b004ea009c154e1de8fbdcdcb2796.pdf} } @article { author = {Mostafa, Ola and Issa, Hanady and Shehata, Khaled and El-Bakly, Ahmed}, title = {ELECTRICAL AND OPTICAL CHARACTERIZATION OF SMOLED AND PLED}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {571-578}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19453}, abstract = {Organic Light-Emitting Diode (OLED) is one of the most interesting areas of scientific research in the field of optoelectronic devices. The aim of this paper is to model the two types of polymer LEDs (PLED) and OLEDs made with small molecules (SMOLED). The electrical and optical characteristics of the two devices are studied. The simulation tool used is ATLAS-SILVACO. Some parameters are swept in the device to optimize the OLED performance, such as thickness of layers and number of layers. PLED has higher luminance and current density than SMOLED.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19453.html}, eprint = {https://jaes.journals.ekb.eg/article_19453_388cf8992453bff8f5171d4b8938edef.pdf} } @article { author = {El-Midany, Tawfik and Abdel Samad, Abdou and Galal Abdel Menam, Ahmed and Abdel-Aziz Saleh, Yaser}, title = {EFFECT OF PARTICLES TYPE, VELOCITY, AND IMPACT ANGLE ON SLURRY EROSION OF STAINLESS STEEL USING SIMPLE TEST RIG}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {523-535}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19454}, abstract = {The present work is a study of the effect of slurry particle type, impact angle, and velocity, and test duration time on the erosion process of stainless steel 316, 304. Erosion change the surface geometry of the parts, components of machines that will affect the performance and efficiency of the parts may be causing the parts failure. Mud or sand particles were used in water with concentration of 40 wt. %. The particle maximum dimension is 550 µm. Specimens velocities were 2.3m/s and 5.75 m/s using a simple test rig was designed and fabricated to investigate slurry erosion and cavitation erosion. This is done by rotating the specimens in a transparent tank containing slurry with the desired composition and concentration with a fluid. The velocity of specimens can be from zero m/s up to 14 m/s. The specimen weight loss of the eroded sample was examined and was evaluated. The weight loss is measured using a balance with sensitivity of 0.0001g, and the surface is photography using SEM examination. Results show that; the increase of particles hardness results in increase the weight loss. And increase the testing time affecting the wear rate. Also increase velocity increasing weight loss. Impact angle has a great effect on weight loss. Test rig results come in agreement with the previous theoretical and experimental results. It is concluded that test rig is valid to investigate the slurry erosion and cavitation erosion due to different parameters.   دراسة تأثير نوع الحبيبات وسرعتها وزاوية الصدم على تآکل النحر لعينات ستانلس ستيل 316و 304 . يؤثر التآکل على سطح وأبعاد الجزء فى الماکينة فيسبب نقص فى أداء وکفاءة الجزء وقد تسبب کسر الجزء. تم إجراء اختبارات التآکل للعينات و ذلک لنوعين منفصلين من الحبيبات وهى حبيبات الرمل وحبيبات الطمى معلقة فى المياة عندما کان ترکيز الحبيبات الصلبة 40% وسرعة التصادم بين العينات والسائل المحمل بالحبيبات الصلبة 2.3 م/ث ، 5.75 م/ ث وکان حجم الحبيبات المستخدمة فى الأختبارات أقل من 550 ميکروميترز. وذلک بأستخدام وحدة أختبار معملية مبسطة لدراسة وتحليل تآکل التکهف و النحر للعينات. يتم الأختبار عن طريق دوران العينات داخل خزان أسطوانى شفاف وبذلک يکون هناک سرعة نسبية بين العينات والحبيبات المعلقة بالسائل و تتراوح السرعة من صفر حتى 14 م/ث . کما تم دراسة تأثير زاوية إصطدام الحبيبات بالمعدن.  وتم قياس معدل التآکل فى العينات عن طريق ميزان الکترونى ذو حساسية 0.0001 جرام وکذلک فحص عدد من مواقع الصدم وطرق تشکيلها على سطح العينات المختلفة بإستخدام مجهر الماسح الإلکترونى ثم تحليل الصور المجهرية.  أوضحت النتائج أن صلادة الحبيبات کلما زادت کلما زاد معدل التآکل وکذلک أنها تؤثر على مراحل التآکل وکما أوضحت النتائج أن زيادة مدة الأختبار الزمنية توثر على معدل التآکل وکذلک شکل معدل التآکل. کما تؤثر زاوية إصطدام الحبيبات تأثيرا کبيرا على معدل التآکل. کما تم تقييم نتائج الجهاز المستخدم وثبتت صلاحيه الجهاز لأجراء أختبارات مستقبلية لدراسة العوامل المؤثرة على التآکل.}, keywords = {Slurry erosion,particles type,Impact angle,pot tester,Stainless Steel 304,stainless steel 316,Erosion Resistance}, url = {https://jaes.journals.ekb.eg/article_19454.html}, eprint = {https://jaes.journals.ekb.eg/article_19454_e88f682e9ab2d2a1ede25bfca476671a.pdf} } @article { author = {A A Alkhamees, Ali}, title = {NALYSIS OF CLOSED DIE COLD FORGING FOR SPUR GEAR USING THREE DIMENSIONAL SLAB TECHNIQUE}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {610-640}, year = {2018}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2018.19455}, abstract = {The present study is concerned with upset forging of arbitrarily-shaped prismatic blocks which is characterized by three-dimensional deformation. From the proposed velocity field, the upper-bound load and deformed configuration are determined by minimizing the total power consumption with respect to some chosen parameters; such as the proposed method of analysis in this work can be used for prediction of forging load and deformation in upset forging of arbitrarily-shaped prismatic blocks. Closed-die forging of toothed disk is investigated using the slab method technique The tooth regions are approximated by prismatic rectangular sections. The velocity field comprising three-unit deformation regions is used. A constant frictional stress between work-piece and forging die is assumed. The average punch pressure normalized by the flow stress of the billet material is determined theoretically and compared with the present experimental results The experimental work is carried out on a commercial pure Aluminum (Al 1100) at room temperature The forging process is carried out using one die geometry without using any additional blocker dies. The theoretical predictions of forging pressures and deformation configurations are in good agreement with the experimental results. The experimental work proves that the analysis is good within approximately 36% of error according to many parameters.}, keywords = {Closed Die forging,cold forming,Three Dimentional Slab method,Spur gear}, url = {https://jaes.journals.ekb.eg/article_19455.html}, eprint = {https://jaes.journals.ekb.eg/article_19455_d16690c744298110ee89e6cc3064b450.pdf} } @article { author = {عادلي, طارق and البشيهي, رقية}, title = {العمارة الداخلية للمناطق الخدمية بالمحميات الطبيعية ) دراسة تطبيقية على محمية وادي الحيتان بالفيوم)}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {728-743}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19456}, abstract = {The technological revolution has been reflected upon the interior design architecture as it did to the rest of the scientific, social and daily life fields. So it has a significant influence on the interior architectural designs to an extent that the architectural output is now restricted to designing by modern technological methods and receiving the output as drawings by means of the computer ,and it has gone so far that it missed the environmental designs that represents the surrounding nature . As a result of this, interior architectural designers turned back to nature when designing environmental eco-designs concerning natural reserves. These places have a unique nature that needs in its designing to two key elements, the first is not to lose the feeling of belonging to nature and the primitiveness as general. The second one is using modern technology in a way that is more harmonize and complementary to the unique nature of the natural reserves, and from here arises the research issue about " Not having services' areas inside the natural reserves" that help attraction of tourist and researches. So the research targeted " Wadi Hitan reserve in fayoum" to shade the light on it after it has been internationally included within the universal heritage list. This requires for putting an accurate scientific methodology for the ways and the materials of construction and the elements of the interior architecture that is needed to make Wadi Hitan reserve a good services area to be compatible with it being a natural reserve by making interior architectural designs that is needed for it as a whole including entire area through an open museum for the fossil area in it and all that is included within this museum of services' building. On a condition that the interior architectural designer has a full knowledge on the development of the ways and modern technology to reach a designing language that finds architectural solutions that is compatible with the surrounding environment. And not to forget that the furniture is a crucial part of the design that is inspired by the surrounding environment. انعکست الثورة التکنولوجية على العمارة الداخلية شأنها في ذلک شأن باقي المجالات العلمية والحياتية والاجتماعية.. فبرز تأثيرها واضحاً في تصميمات العمارة الداخلية.. فأصبح النتاج المعماري يقتصر على التصميم بالطرق التکنولوجية الحديثة واخراجها کرسوم بواسطة الحاسوب بل تعدى ذلک وأغفلت في طياته التصميمات البيئية المتحاکيه مع الطبيعة المحيطة.      بناء علي ذلک اتجه مصممي العمارة الداخلية للعودة الى الطبيعة عند التطرق الى عمل تصميمات بيئية داخل نطاق المحميات الطبيعية فهذه الأماکن ذات طبيعة فريدة تحتاج في تصميمها الى عاملين رئيسيين أولهما أن لا تفقد الإحساس بالانتماء للطبيعة والفطرة في المجمل العام وثانيهما أن تطوع التکنولوجيا الحديثة بطريقة أکثر اکتمالا وانسجاما مع الطبيعة الفريدة للمحميات الطبيعية ، ومن هنا تکمن مشکلة البحث  بـ " عدم وجود مناطق خدمية داخل المحميات الطبيعية " تساعد على الجذب السياحي والدارسين وبذلک فقد استهدف البحث " تسليط الضوء على محمية وادي الحيتان بالفيوم بعد إدراجها دوليا ضمن لائحة التراث العالمي" مما يتطلب وضع منهجية علميه دقيقة لأساليب ومواد البناء وعناصر العمارة الداخلية اللازمة لتهيئة  وادي الحيتان کمنطقة خدمية بما يتوافق مع کونها محمية طبيعية حيث يتم وضع تصميم للعمارة الداخلية اللازمة لها بصورة متکاملة تشمل المنطقة بکاملها من خلال متحف مفتوح لمنطقة الحفريات بها وکل ما يشتمل علية مفردات هذا المتحف من مباني خدمية ، بشرط ان يکون مصمم العمارة الداخلية على دراية کاملة بتطور الأساليب والتکنولوجيا الحديثة للوصول الى لغة تصميمية تضع حلولا معمارية تتوافق مع البيئة المحيطة ولا تغفل ان الأثاث جزء اصيل من التصميم المستوحى من مفردات البيئة المحيطة .}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19456.html}, eprint = {https://jaes.journals.ekb.eg/article_19456_9f2028a4a66ec41e0c88b60438f23e54.pdf} } @article { author = {Elsharkawi, Hossam and El-Eishy, Alaa and El-Tantawy, Ahmed}, title = {LEED RATING SYSTEM APPLICATION ON EL-DAKAHLIA GOVERNMENTAL HEADQUARTER BUILDING TOWARDS BETTER SUSTAINABLE PERFORMANCE AND ECOFRIENDLY BUILDING}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {579-590}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19457}, abstract = {The overriding purpose of this paper is to determine the relative importance of the application of LEED (Leadership in Energy and Environmental Design) rating system as a curriculum organizer Tools for getting a sustainable and eco-friendly building and community as well in Egypt. Throughout the application and assessment process on the proposed case study El-Dakahlia Governmental Headquarter building (Existing Building - Major Renovation) as a case study to achieve sustainability requirements which results in renovate and promote the existing building according to LEED Rating System Requirements towards a sustainable and ecofriendly buildings and urban communities consequently}, keywords = {LEED,Green Building,Sustainability,Urban Community}, url = {https://jaes.journals.ekb.eg/article_19457.html}, eprint = {https://jaes.journals.ekb.eg/article_19457_80eaa71c582373d5d37bf591f2a7b0f1.pdf} } @article { author = {عطوه, محمد and کمال الشبراوي, أشرف}, title = {تأثير هندسة القيمة في مشروعات التشييد فى المملکة العربية السعودية}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {874-881}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19458}, abstract = {الارتقاء النوعي بالمشروعات والخدمات من خلال رفع قيمتها بالتحسين و التطوير مع خفض التکاليف الکلية لها من دون أن يکون ذلک على حساب المتطلبات و الاحتياجات الضرورية أمر ممکن إذا طبقنا منهج  هندسة القيمة. والاستغلال الأمثل للموارد هو مطلب تزداد الحاجة له يوماً بعد يوم لأن معظمها  إن لم يکن جميعها قابل للنضوب و يزداد الطلب عليها بالطرد, و من أجل هذا يصبح تطبيق منهج هندسة القيمة على المشروعات و الخدمات و غيرها مطلب ملح للبقاء ومن بعده النماء في ظل منافسة عالمية شديدة , خصوصاً إذا علم أن تطبيق الهندسة القيمية حقق نتائج في خفض التکاليف و التطوير و التحسين تراوحت ما بين 5% إلى 15% و بلغت أکثر من هذا بکثير في حالات معينة.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19458.html}, eprint = {https://jaes.journals.ekb.eg/article_19458_4ef3db635307768544065b3fa555b9d6.pdf} } @article { author = {Ali, S and Abdel-Aziz, M and Refai, R}, title = {COMPARATIVE STUDY BETWEEN DIFFERENT METHODS USED IN PROTECTION BY DISTANCE OF ELECTRICAL NETWORKS}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {557-570}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19459}, abstract = {Distance relays (D.R) are used in protection of electrical networks to measure the apparent impedance of the fault and shall compare it with its D.R setting impedance, but the apparent impedance may be differ from the actual impedance due to the network challenges appeared such as effect of branched networks, series capacitor for compensation, power swing, parallel transmission lines and fault resistance. All of these challenges will result to overreach or underreach errors, accordingly false trip. Some of approach methods shall be introduced in this paper to overcome these errors. In the recent transmission line (T.L) systems, more than one of these challenges can appear simultaneously. It shall be difficult to adjust the D.R with value suitable for all challenges. In this paper, the study how D.R will overcome each challenge alone and how it will be adjusted with value suitable for all of these challenges together shall be considered.}, keywords = {Distance relay,Overreach And Underreach Errors,Multi Terminal Line,Parallel Lines,Series Capacitors,Power Swing,Fault And Load Resistance}, url = {https://jaes.journals.ekb.eg/article_19459.html}, eprint = {https://jaes.journals.ekb.eg/article_19459_8343cedd0dbadeee42ced136315b42cf.pdf} } @article { author = {نبيه فرج, عادل}, title = {دراسة تحليلية لعمليات إدارة العمران لإسکان ذوي الدخل المتوسط بدولة الإمارات العربية المتحدة}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {704-715}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19460}, abstract = {  تهدف الورقة البحثية إلى دراسة آليات التحکم في التنمية العمرانية وعلاقتها بإسکان ذوي الدخل المتوسط والتعرف على أساليب الرقابة والتحکم في تنفيذ المخططات الإستراتيجية وأساليب مشارکة القطاع الخاص والمنظمات الغير حکومية في خطط التنمية وبرامج التنمية لإسکان ذوي الدخل المتوسط وذلک من خلال الاعتماد على المنهج التحليلي لتجربة مدينة أبوظبي ، وذلک على النحو التالي:-   أولاً:- استعراض آليات التحکم في التنمية العمرانية وبعض المحددات العمرانية المختلفة التي يمکن أن يواجهها المخطط أو المطور أثناء التخطيط لإسکان ذوي الدخل المتوسط وسبل مواجهاتها وتعظيم الاستفادة منها، وبيان العوامل المؤثرة علي آليات التحکم في التنمية العمرانية لإسکان ذوي الدخل المتوسط بالمدن المليونية0   ثانياً:- ألقاء الضوء علي تجربة مدينة أبو ظبي بدولة الإمارات العربية المتحدة  ( کنموذج للمدن المليونية) في تخطيط إسکان ذوي الدخل المتوسط وسياسات الرقابة المتبعة .    ثالثاً:- توضيح أهم المشکلات التي واجهت السوق العقاري إسکان ذوي الدخل المتوسط في مدينة أبو ظبي في الفترة الأخيرة نتيجة للأزمات الاقتصادية والمتغيرات العالمية والتطرق إلى الخطط الحکومية المستقبلية المقترحة لعلاجها.   رابعاً:- توصل البحث إلى عدد من النتائج منها أهمية استخدام أساليب الرقابة الحکومية المتواصلة و إدارة الأزمات عند تنفيذ برامج التنمية المکلف بها القطاع الخاص کمنفذ ومستثمر، وأهمية تنوع أساليب تشجيع الاستثمار في قطاع إسکان ذوي الدخل المتوسط ليصمد المخطط أمام التغيرات الديناميکية في الواقع الاقتصادي والاجتماعي المتغير بسرعة وتعظيم الاستفادة من دور القطاع الخاص في تنفيذ برامج التنمية .   خامسا:- توصيات البحث: استخلص البحث الي أهمية تشجيع القطاع الاسکاني الخاص عن طريق توفير محفزات التنمية و تسهيل عملية الاستثمار في التنمية العمرانية من خلال تنوع العرض والطلب ، کذلک أهمية رقابة الدولة ممثلة في جهة الاختصاص لعمليات التنفيذ لمخططات تنمية الاسکان وضرورة تشکيل مجلس مختص بعملية ادارة عمليات الاسکان لذوي الدخل المتوسط.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19460.html}, eprint = {https://jaes.journals.ekb.eg/article_19460_e6cee22a18c71e27fcd450d6f94cf431.pdf} } @article { author = {Malallah, Emad and Husain, Adel}, title = {AC IMPEDANCE TECHNIQUE FOR ACCELERATED EVALUATION OF COATED STEEL SUBSTRATE}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {825-843}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19461}, abstract = {The main aim of this preliminary research study was to introduce the Electrochemical Impedance Spectroscopy as a new instrument to be introduced to the Trainer of the Welding Department at Industrial Institute Shuwaikh as a training tool in the laboratory for the evaluation and screening of different coatings on steel substrate. In this respect a training and research investigation has been held on EIS at Construction and Building Materials CBM / KISR for Eng. Emad Malallah who is an Trainer at the Welding Department. The technical report consists of the following training sessions and research study: Literature Survey on different types of paints and protection mechanism Electrochemical Impedance Spectroscopy EIS; Theory and Lab Practice  Experimental application of EIS on different generic type of coatings in order to understand the Impedance and capacitance response over a wide frequency range of 0.01 Hz to 100 KHz. The selected Paint system that has been investigated consists of; Clear Polyurethane Paints (C1&C2), HB Phosphate Primer (S1&S2), and Zinc Epoxy Polyamide (ZE); as well as un-painted bare steel substrate (BP&BN). The painted steel substrate was immersed in 3%NaCI solution for test duration ranging from 0 hrs. to 337 hrs. The AC Impedance results have indicated variation in the performance and deterioration behavior of the various paint system employed. The values of the paint film capacitance (Cc) and resistance (Ppo) were recorded experimentally from Nyquist plots. Photographic and SEM photomicrographic examination were obtained for the coated steel substrates. Finally, the EIS data obtained were used for ranking of the different selected paint systems according to the highest paint performance in Sodium Chloride solution and the paint surface free from the on sit of corrosion products, blisters or rust. The overall results have indicated that the best performance in terms of ranking were obtained for:                                                                                    ZE > S2 > CI ان الهدف الرئيسي من هذه الدراسة البحثية الأولية لتقديم الکهروکيميائية الممانعة الطيفية کأداة تدريبية جديدة يتم تعريفها للمتدرب من قسم اللحام في معهد الشويخ الصناعية لتقييم وفحص طبقات الطلاء المختلفة على  الحديد الصلب. وفي هذا الصدد تم إجراء تدريب وتحقيق بحثي على EIS في مواد البناء والتصنيع CBM / في معهد الکويت للابحاث العلمية للمهندس عماد مال الله الذي يدرب في قسم اللحام.   يتکون التقرير الفني من الدورات التدريبية والدراسة البحثية التالية: • مسح بحثي على الأنواع المختلفة من الدهانات وآلية الحماية المتوفرة. • الکهروکيميائية الممانعة الطيفية EIS؛ النظرية وسبل الممارسة بالمختبر. • التطبيق التجريبي ل EIS على الأنواع المختلفة من الطلاء من أجل فهم الممانعة والتصدي لنطاق واسع من الترددات 0.01 هرتز إلى 100 کيلو هيرتز. • يتکون نظام الطلاء المختار الذي تم التحقق منه من مادة البولي يوريثين الدهانات(C1&C2), HB وفوسفات التمهيدي (S1 & S2)، والزنک الايبوکسي مادة البولي أميد (ZE)؛ وکذلک الحديد الصلب الغير مطلي (BP وBN). وکان الحديد الصلب المطلي مغمور في ماء متکون من 3٪ ملح الطعام لمدة الاختبار  التي تتراوح بين 0 ساعة إلى 337 ساعة. وقد أشارت نتائج AC الممانعة التباين في الأداء وتدهور سلوک مختلف نظام الطلاء المستخدمة. وأخيرا، تم استخدام البيانات التي تم الحصول عليها من EIS لترتيب أنظمة الطلاء المختارة المختلفة وفقا لأعلى مستوى من أداء الطلاء في محلول کلوريد الصوديوم وسطح الطلاء الخالي من اي آثار للتآکل أو الصدأ. وقد أشارت النتائج الکلية أن أفضل أداء من حيث الترتيب تم الحصول عليها ل ZE> S2> C}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19461.html}, eprint = {https://jaes.journals.ekb.eg/article_19461_1977f12334abccdebddf655f8fa2b01c.pdf} } @article { author = {أحمد مصطفى, مى and قاسم, مجدى and عطوة, محمد}, title = {تقييم تجربة العمارة المستدامة فى مصر}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {716-727}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19462}, abstract = {اتجه العالم حاليا للعناية بالبيئة، وأصبحت هناک الکثير من المفاهيم الحديثة التي تحاول الربط بين العمارة والبيئة قديما وحديثا، وذلک للربط بين تراث مفعم بالروح وحداثة مثقلة بتأثير المادة وذلک من خلال استخدام الإمکانيات الهندسية والتقنية التي تهيئ البيئة وتجعلها صالحة للمعيشة وتحافظ على جودتها ومع ظهور مصطلح الاستدامة "والذي يشير إلى الاستراتجيات التطويرية التي تراعي متطلبات ورغبات أجيال الحاضر والمستقبل معا وتهدف إلى توفير توازن في المصالح التي تخدم الکل في الحقول الاقتصادية والاجتماعية والبيئية"، بالإضافة إلى ظهور مفهوم العمارة البيئية الذي يهتم بالمحيط الطبيعي المادي للبيئة ، ويوصي باستعمال مواد لا تضر البيئة وتدعوا إلى الحفاظ على قاعدة الموارد الطبيعية للمستقبل , کما تبنت التنمية المستدامة مجموعة من الاستراتيجيات منها "التوجيه الأمثل للمبنى واستغلال الطاقات الطبيعة والعناية بنظم التخطيط وتفاصيل البناء وغيرها" وکذلک تحسين جودة الحياة للمستخدمين بما فيها الصحة العامة کما تساعد على تحقيق التنمية الاقتصادية عبر حماية الموارد الطبيعية والمواد الأولية , ويعتبر التصميم المستدام خطوة أساسية لتحقيق العمارة المستدامة. يقول المعماري جيمس ستيل في کتابه "العمارة الخضراء": "...الاستدامة تتطلب توظيف المهارات التي يستعملها المعماري بشکل أفضل کالتحليل, المقارنة، التأليف، والاستنتاج وهي تقود إلى الخيارات الجمالية التي لها أساس في الحقيقة بدلاً من الأنماط التشکيلية. وإذا نظرنا إلى الوضع الحالي للتنمية في مصر نجد انه يواجه العديد من المشکلات الاجتماعية والاقتصادية والبيئية والعمرانية والإدارية, وان مشاريع التنمية في مصر في حاجه إلى إعادة الصياغة وفق المفاهيم العالمية الجديدة ومفاهيم التنمية المستدامة حتى تأتي التنمية بثمارها.}, keywords = {}, url = {https://jaes.journals.ekb.eg/article_19462.html}, eprint = {https://jaes.journals.ekb.eg/article_19462_01f688822d72d8f584e6d9ad8e898840.pdf} } @article { author = {Mossad, Gihan and Ezzat, Hussein and Talaat, Nada}, title = {NATURAL VENTILATION IN OLD ISLAMIC HOUSES THE STUDY OF COURTYARD IN OLD CAIRO CASE STUDY:}, journal = {Journal of Al-Azhar University Engineering Sector}, volume = {11}, number = {39}, pages = {601-615}, year = {2016}, publisher = {Al-Azhar University; Faculty of Engineering}, issn = {1687-8418}, eissn = {3009-7622}, doi = {10.21608/auej.2016.19463}, abstract = {Cairo; the capital of Egypt, is a rich architectural environment with long history extending over 70,000 years. The rich history is still educating and informing knowledge in all fields of science. An important part of this history is the Islamic era and its vibrant architecture. This research studies the architecture of houses in old Cairo and focuses mainly on their courtyards. Courtyards in old houses served many purposes; social, religious and environmental factors. Egypt has been confronted with an escalating energy demand due to the gradual rise in the use of mechanical ventilation  associated with loss in natural ventilation design in houses.  This paper aims at learning from the past to achieve a sustainable built environment by understanding the necessity of passive ventilation strategies and how courtyards inform it. This is achieved through inductive methods such as literature review represented in the first part and analytical method through the application of passive ventilation in an old courtyard Islamic house.}, keywords = {Courtyard,Passive Cooling,Islamic houses , natural ventilation}, url = {https://jaes.journals.ekb.eg/article_19463.html}, eprint = {https://jaes.journals.ekb.eg/article_19463_2c7de78e43dd237b18e98344e64eb953.pdf} }