Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
التعليم بالتواصل من خلال الزيارات الميدانية فى التعليم المعمارى
1007
1017
EN
أحمد
الشحات
المنشاوي
قسم الهندسة المعمارية کلية الهندسة – جامعة الزقازيق
سناء
ابراهیم
عبد المقصود
قسم الهندسة المعمارية کلية الهندسة – جامعة الزقازيق
10.21608/auej.2017.19170
This paper discussion efficiency of integrating the concept of students field trips in the order tactual education process through exploring students feel bake around designated question and answer thanes , and upon a field trip to an architectural site that is selected according to a specific criteria <br /> تناقش هذه الورقه تأثير الرحلات العلمية للمبانى المعمارية فى عملية التعليم المعمارى وذلک من خلال استطلاع رأى واستبيان لطلاب العمارة بعد زيارة أحد المواقع المعمارية والتاريخية الهامه وقد تم اختيار الموقع طبقا لمعايير الهدف فى البحث وکذلک من خلال استمارة استبيان صممت خصيصا لهذا الغرض.
https://jaes.journals.ekb.eg/article_19170.html
https://jaes.journals.ekb.eg/article_19170_9742aeda685c2e92e3545514a8f92eae.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
MEASURING URBAN QUALITY OF LIFE: CASE STUDY OF MADINET NASR
900
906
EN
Moataz
Mohamed
Ain Shams Univeristy, Department of architecture, Cairo, Egypt
Yasser
Mansour
Ain Shams Univeristy, Department of architecture, Cairo, Egypt
Mohamed
gabr
Ain Shams Univeristy, Department of architecture, Cairo, Egypt
Ayman
Assem
Ain Shams Univeristy, Department of architecture, Cairo, Egypt
10.21608/auej.2017.19171
Madinet Nasr is by far the most attractive area for residents to live in Cairo; it was the first planned area after Cairo master plan execution in 1956. Although the district follows the invasion and relay rule, but it has rapid population growth; which affect its physical setting, urban and social aspects. These sides could be tracked from residents’ responds. The study aims to measure and analyze quality of urban life (QOUL) and quality of life (QOL) as they related to each other; using subjective test and structure equation modeling, results show that QOUL and QOL did not affect by population growth or urban horizontal and vertical expansion. The research came atthe conclusion that high appeal areas (attractive areas) have a positive effect on QOUL and QOL.
QOL,quality of life,QOUL,Quality of Urban Life,Madinet Nasr
https://jaes.journals.ekb.eg/article_19171.html
https://jaes.journals.ekb.eg/article_19171_18055ef687595b981093332f016b801c.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
تأثير الظواهر الفلکية على تصميم مبانى الحضارة الاسلامية
1121
1132
EN
يحيى
حسن
وزيرى
قسم العمارة بالمعهد العالى للهندسة والتکنولوجيا بالعريش- مصر
10.21608/auej.2017.19172
The impact of astronomical phenomena on buildings design of Islamic civilization<br /> Astronomy is one of the oldest sciences; it began in ancient times through remarks about the movement of celestial bodies at regular sessions. The astronomy and astronomical phenomena had a large role not only in the civilization and Islamic jurisprudence but also on Islamic buildings design and elements, especially mosques and observatories.<br /> The main aim of the present study is to shed light on the integration of astronomy and architecture in the Islamic civilization. The aim of the study illustrated through the following points:<br /> 1- Using of astronomical phenomena to determine the Qiblah (direction of prayer towards Mecca City).<br /> 2- Using of sundials in mosques design to determine the timing of the prayers.<br /> 3- Examples of astronomical observations buildings in the Islamic civilization.<br /> The research also aims, on the other hand, to draw the attention of contemporary designer to the importance of taking advantage of some astronomical phenomena in contemporary building design.<br /> يعتبر علم الفلک أحد أقدم العلوم، فقد بدأ في الأزمنة القديمة بملاحظات حول حرکة الأجرام السماوية في دورات منتظمة، وخلال التاريخ أفادت دراسة هذه الدورات في أغراض تطبيقية مثل ضبط الزمن، وتحديد بدايات الفصول، ودقة الملاحة في البحار وغيرها.<br /> وکان لعلم الفلک واستخدام الظواهر الفلکية دور کبير فى الحضارة والفقه الاسلامي، حيث لم يقتصر الاستعانة بهذه الظواهر لتحديد الوقت فقط، ولکن أيضا لتحديد مواقيت بعض العبادات فى الاسلام.<br /> لقد استعان المسلمون فى توجيه المساجد الأولى الى جهة مکة المکرمة حيث القبلة ببعض الظواهر الفلکية، کما ظهر أيضا ذلک فى أهمية وجود طريقة لتحديد مواقيت الصلاتين النهاريتين (صلاتى الظهر والعصر بصفة خاصة)، فأدى ذلک لوجود المزاول الشمسية على العديد من واجهات هذه المساجد أو داخل صحونها المکشوفه فى أغلب بلاد العالم الاسلامى.<br /> ان الهدف من هذه الدراسة هو القاء الضوء على التکامل بين علم الفلک وفن العمارة فى الحضارة الاسلامية، وقد تم ذلک من خلال المحاور الأساسية التالية:<br /> 1- استخدام الظواهر الفلکية لتحديد اتجاه القبلة.<br /> 2- استعمال المزاول الشمسية بالمساجد لتحديد مواقيت الصلاة.<br /> 3- نماذج من مبانى الرصد الفلکى فى الحضارة الاسلامية.<br /> کما يهدف البحث من جانب آخر الى لفت نظر المصمم المعاصر الى أهمية الاستفادة من بعض الظواهر الفلکية فى تصميم المبانى المعاصرة، من خلال الاشارة الى بعض التصميمات المعمارية المعاصرة، ومنها نموذج تطبيقى من تصميم مقدم البحث.
Astronomical phenomena,Islamic architectural,observatories,Sundials. الظواهر الفلکية، العمارة الاسلامية، المراصد والمزاول، المبانى المعاصرة
https://jaes.journals.ekb.eg/article_19172.html
https://jaes.journals.ekb.eg/article_19172_50eb1d1dedfd3774c8769a33329100fb.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
تطبيق مفهوم مراقبة الجودة على مراحل أعمال ترميم المبانى الأثرية
961
966
EN
سناء عبد المقصود
إبراهیم
عبد المقصود
کلية الهندسة – جامعة الزقازيق- جمهورية مصر العربية
10.21608/auej.2017.19173
In general, restoration processes require utmost degree of accuracy and attention when dealing with old buildings of archeological value. This is in order to avoid irreversible damages to the restored parts through its various phases. This paper discusses the possibility of integrating quality control concepts that are usually implemented throughout different construction phases of regular buildings. The restoration experience of "Temraz Al- Ahmady" Mosque is a selected case study of this research paper; Since such mosque was in need for some sort of inspection during its various stages of its restoration project. The paper debated the issue by dividing the restoration process of the above mosque into three phases: the first phase introduces the project initiation and how the main contractor is selected. The second phase introduces process of selecting the supervising team or the project consultant. The third phase introduces project delivery procedures then followed by an exploration of the possibility of implementing quality control on such phases.<br /> إن إعمال الترميم فى مجملها تحتاج الى الدقة والحرص فى الأداء، اذ يجب أن تتوفر الآليات التى تؤمن تضييق مساحة الخطأ الى أقصى حد ممکن عند التعامل مع المبانى الأثرية.<br /> تقدم هذه الورقة البحثية مقترحا لضبط مراحل وعمليات الترميم بصفة خاصة، وذلک من خلال تطبيق مفهوم مراقبة الجودة على مراحل الترميم، وقد وقع اختيار البحث على مسجد تمراز الأحمدى کحالة واضحة للدراسة ظهر من خلال التعامل معها ضرورة تطبيق هذا المفهوم أثناء مراحل العمل على ترميمها.
quality control,Quality Control In monuments Buildings,Quality Control In Restoration Of Buildings
https://jaes.journals.ekb.eg/article_19173.html
https://jaes.journals.ekb.eg/article_19173_8e40ef4f47fbbe92568f36477bc0e5d4.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
أدوات تقييم الاستدامة الاجتماعية داخل البيئة الحضرية نحو إطار عمل للنموذج المنهجي / الإرشادي لتقييم الاستدامة الاجتماعية للبيئة الحضرية في ضوء التوجهات الحديثة
993
1005
EN
عمرو
الحلفاوي
قسم الهندسة المعمارية –کلية الهندسة - جامعة القاهرة
مهاد
سید
إبراهيم حسن عمارة
الأکاديمية الحديثة للهندسة والتکنولوجيا بالمعادي
10.21608/auej.2017.19174
This paper adopt the modern concept of social sustainability in the light of future transitions research aims to (deal with this new thinking that has occurred on Sustainable Cities, a special year-site evaluation systems, as this thought is aimed at the sustainability of the urban environment and access to sustainable urban communities (Tools for Planned Neighborhoods). So as to reach the proposed framework for the systematic sample / Guidance to assess the social sustainability of the urban environment in the light of recent trends.<br /> يقوم هذا البحث <strong> بتبني</strong><strong>المفهوم</strong><strong>الحديث</strong><strong>للاستدامة الاجتماعية في</strong><strong>ضوء</strong><strong>التحولات</strong><strong>المستقبلية </strong>وصولا إلى دور أدوات التقييم (rating (system الحديثة في تحقيق الاستدامة الاجتماعية داخل البيئة الحضرية، من خلال خلق نتاج حضري معاصر يتسم باستثمار عناصر ومکونات تنسيق الفراغات السکنية المفتوحة وخلق بيئة حضرية تعزز الانتماء المکاني وتسعى لتحقيق مبادئ الاستدامة.
https://jaes.journals.ekb.eg/article_19174.html
https://jaes.journals.ekb.eg/article_19174_7a07b64101ce097243d412be3a2453e5.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
مدى شمولية قرارات إعلان إسطنبول لمجمل مؤشرات الامم المتحدة للتنمية العمرانية المستدامة
979
992
EN
سهام
عبد الحلیم
محمد
قسم الهندسة المعمارية - کلية الهندسة بشبرا
أحمد
عواد
جمعه
قسم الهندسة المعمارية - کلية الهندسة بشبرا
10.21608/auej.2017.19175
This study aims to memorize mechanisms to achieve sustainable urban development issued by the Istanbul Declaration in 1996 and it’s integrated with the overall United Nations indicators in this area. The Shortage Unclear in Istanbul Declaration mechanisms to achieve sustainable urban cities comparing these mechanisms with the general indicators.<br /> تتجسد مشکلة الإنسان مع الطبيعة فى ضرورة إعطاء الطبيعة صفة الإستمرار بکفاءة کمصدر للحياة ، والعمران المستدام هو أحد أهم وسائل التعامل الناضج مع البيئة والحفاظ عليها حيث يرمى الى تقليل إستهلاک الطاقة والمواد والموارد وايضاً تقليل التأثير الضار لکل منالإنشاء والإستعمال على البيئة الطبيعية .<br /> لذلک ظهرت الدعوة لتحقيق مبدأ التنمية المستدامة وکانت منظمة الأمم المتحدة هى الداعمة والعاملة من أجل تحقيق هذا المبدأ ، وظهر ذلک في العديد من المؤتمرات والإعلانات الصادرة عنها ومن أهم هذه المؤتمرات مؤتمر اسطنبول عام 1996 والمعروف (بقمة المدن ) الذي صدر عنه أهم إعلانات المستوطنات البشرية وکان هدف هذا المؤتمر تقييم التقدم منذ الموئل الأول في فانکوفرالذي کان بداية لتأسيس بدايات لجنة الأمم المتحدة للمستوطنات البشرية ، ووضع أهداف حديثة للألفية الجديدة وجعله إحد البرامج الاساسية للمنظمة بعدما أصدرت مجموعة متکاملة من المؤشرات للتنمية المستدامة لتکون بمثابة مقياس ودليل للمجتمعات لتحقيق الاستدامة في شتى المجالات ، کما يمکن من خلال هذه المؤشرات معرفة التقدم تجاه تحقيق الهدف المنشود.<br /> وتهدف هذه الدراسة الى إستظهار آليات تحقيق التنمية العمرانية المستدامة الصادرة عن إعلان اسطنبول 1996 وتکاملها مع مجمل مؤشرات الأمم المتحدة فى هذا المجال .<br /> وبمقارنة هذه الآليات بالمؤشرات العامة التي طرحتها منظمة الأمم المتحدة يتضج وجود نقص فى آليات إعلان اسطنبول لتحقيق مدن مستدامة عمرانياً.<br /> وبتتبع ما ورد عن برنامج الأمم المتحدة للمستوطنات البشرية من تقارير خاصة بهذا المجال توصلت الدراسة أن هذه التقارير قدمت من الأليات ما يکمل إعلان قمة المدن ليصبح برنامج المستوطنات البشرية إحدى برامج الأمم المتحدة التي يمکن للدول الراغبة لتحقيق نهضة عمرانية مستدامة اللجوء إلى إرشاداتها وتوجيهاتها لتحقيق تنمية عمرانية مستدامة ناجحة.
(الإستدامة,العمران المستدام ، مؤتمر قمة المدن، مؤشرات الأمم المتحدة، المستوطنات البشرية)
https://jaes.journals.ekb.eg/article_19175.html
https://jaes.journals.ekb.eg/article_19175_94a83091871f4aed96aa46679a7cae90.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
التصميم المعمارى بين الفنون والعلوم التطبيقية "دراسة فلسفة التجديد بالباوهاوس کنموذج للمنهج التصميمي المعاصر"
1026
1035
EN
صالح
السید
حافظ صالح
قسم العمارة – کلية الهندسة - جامعة الأزهر
محمود
عبد الرحیم
سيد عبد الرحيم
قسم العمارة – کلية الهندسة - جامعة الأزهر
محمود
أبوالأنوار
محمود مجاهد
قسم العمارة – کلية الهندسة - جامعة الأزهر
10.21608/auej.2017.19176
In view of the architectural design for the time being, we will finally found that the scene is quiet and static. Thus, in fact, it is not authentic to claim that we are in a period of crucial change, whether it is in design, education, practice or research. Despite that the common reasons to support this interpretation, may vary significantly, it is usually considered latent within the field of design itself. In addition, we are still living with the design performance of the nineteenth century, whether industrially or architecturally, when the concept of this profession appeared for the first time.<br /> In fact, the design appeared to absorb the shock of industrialization and reduce its devastating impact on the cultural fabric. In other words, it came to make industrial products acceptable in terms of cultural, social, economic, symbolic and practical aspects. And, aesthetics was its distinctive tool and then appeared the work environment in the mid-twentieth century and again aesthetics in the late twentieth century. However, the unique field of the activity remained the real product processed in architecture and mechanical, electrical and electronic industries. As a matter of fact, the present century has witnessed rapid and continuous manufacturing processes, not only in relation to manufacturing products but also in providing so-called "services" which form our ways of living, such as education and health, entertainment, food, etc. Thus, no one can question the fact that services are products itself.<br /> - Now, the question is: Where and who are the designers responsible for the design of these products? And, Are they similar to product designers in the nineteenth century?<br /> - There are thousands of designed products waiting to be recognized and formed by designers in order to comply with the needs, aspirations, hopes and life projects of its users.<br /> Through this viewpoint and research we will endeavor to find the answer of the following points:<br /> - When to use a theoretical design model as a base for education?<br /> - What is the appropriate theory of knowledge regarding design practicing and what is its importance to the architectural design methodology?<br /> - Does the current level of teaching methodology of the design process inside the design studio sufficient to describe the complexity of the architectural design process?<br /> بالنظر إلى التصميم المعمارى فى الوقت الحالى سنصل إلى نتيجة مفادها بأننا في فترة التغيير الضروري، سواءً کان ذلک في مجال التصميم أو التعليم أو الممارسة أو البحث. وعلى الرغم أن الأسباب المشترکة في دعم هذا التشخيص قد تتفاوت بشکل کبير، فإنها عادة ما تعتبر کامنة ضمن مجال التصميم نفسه.<br /> کما اننا لانزال نعيش مع صورة الأداء التصميمى للقرن التاسع عشر، سواء أکان صناعيا او معماريا" عندما ظهر مفهوم هذه المهنة لأول مرة. فقد جاء التصميم لامتصاص صدمة التصنيع وتخفيف آثاره المدمرة على النسيج الثقافي. وبعبارة أخرى، فقد جاء لجعل المنتجات الصناعية مقبولة من الناحية الثقافية والاجتماعية والاقتصادية والرمزية والعملية. کان علم الجمال أداته المميزة، وجاءت بعد ذلک بيئة العمل في منتصف القرن العشرين، وعلم الجمال مرة أخرى في أواخر القرن العشرين. ويشهد القرن الحالي عمليات تصنيع سريعة ومستمرة وليس فقط فيما يتعلق بتصنيع المنتجات بل في تقديم ما يطلق عليه "الخدمات" التي تشکل طرق معيشتنا مثل التعليم والصحة، والترفيه والمواد الغذائية وغير ذلک من المنتجات التى نتعامل معها فى حياتنا اليومية. فلا يمکن لأحد أن يشکک في حقيقة أن الخدمات بمثابة منتجات في حد ذاتها. ولکن أين ومن هم القائمون على تصميم هذه المنتجات، فهل هم مناظرون لمصممي المنتجات في القرن التاسع عشر؟ هناک الآلاف من المنتجات المصممة التي تنتظر من المصممين إدراکها وتشکيلها بحيث تتوافق مع الاحتياجات ولتطلعات والآمال والمشاريع الحياتية لمستخدميها. ومن خلال هذا البحث يمکننا دراسة محاولات التجديد لمبادىء مدرسة الباوهاوس، ومدى إمکانية تطبيقها فى الوقت الراهن. وذلک من خلال دراسة النموذج النظر والتطبيقى لها وإمکانية تطبيقة کأساس للعملية التعليمية داخل إستوديو التصميم.
https://jaes.journals.ekb.eg/article_19176.html
https://jaes.journals.ekb.eg/article_19176_9d6761d7153c2adb8a8629b1abf2909f.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
الواقع الافتراضي کاداه إبداعية فى عملية التصميم المعمارى دراسة تحليلية لتکنولوجيا المعلومات کتقنية أداة داخل إستديو التصميم المعاصر
1077
1085
EN
صالح
السید
حافظ صالح
قسم العمارة – کلية الهندسة -جامعة الأزهر
عادل
عبد الحمید
رضوان
قسم العمارة – کلية الهندسة -جامعة الأزهر
وليد
محمد
إبراهيم سنطباى
قسم العمارة – کلية الهندسة -جامعة الأزهر
10.21608/auej.2017.19177
Actually, the application of Virtual Reality (VR) remains a major constraint on shapes (formats) display. Usually, the virtual reality software is used to create images of the building model consists of a virtual structure of form. In addition, these special programs of simulation process offer some other matters such as gravity and wind direction. Using these capabilities, we can create more authentic images of building which are found only in architect imagination. However, the architect can use the same VR to assess one of the designs in terms of the aesthetic and function qualities of it. Moreover, the Virtual Reality of computer systems, which opens up new areas to create architectural design innovative systems, is now mainly used for visualization. Thus, it is clear that the presence of acquired work field with three-dimensions may allow the new design techniques.<br /> <br /> Also, the research supposed that the case of pairing technology of virtual reality program with computer programs to process as much data as possible, a new methods and capabilities of design are established. In order to study design systems; based on Virtual Reality, an architecture based on information technology of one of contemporary design studios will be addressed, as well as the theoretical background which it is based on. Thus, achieve practical results that raise design and creative skills for students of architecture in the design studio, in order to overcome the inequalities and large differences between the design studio in the Egyptian universities and its counterpart in the schools of contemporary architecture.<br /> لا يزال تطبيق الواقع الافتراضي حتى الآن عائقًا رئيسيًا على عرض الأشکال. ويستخدم برنامج الواقع الافتراضي لإنشاء صور لنموذج المبنى تتکون من هيکل إفتراضي للشکل. علاوة على ذلک، يمکن لتلک البرامج الخاصة بعملية المحاکاه عرض بعض المسالک الأخرى مثل الجاذبية واتجاه الرياح ودرجات الحرارة ومدى تأثيرها على الفراغات الداخلية لتلک المبانى. وباستخدام هذه الإمکانات، يمکن إنشاء صور للمبنى بواقعية أکبر والتي لا توجد إلا في خيال المهندس المعماري، بل يمکن للمهندس المعماري نفسه استخدام الواقع الافتراضي للحکم على إحدى التصميمات على أساس الصفات الجمالية والوظائفية لها.<br /> کما أن الواقع الافتراضي الخاص بأنظمة الکمبيوتر، والذي يفتح مجالا" جديدة لخلق أنظمة تصميم معمارية إبداعية، يستخدم الأن استخدامًا أساسيًا للتصور. فمن الواضح أن وجود مجال عمل مستحوذ بأبعاد ثلاثية يسمح بوجود تقنيات تصميم جديدة.<br /> <strong>کما يفترض البحث</strong> بأنة في حالة اقتران تکنولوجيا الواقع الافتراضي ببرنامج الکمبيوتر لمعالجة کمية کبيرة من البيانات، تنشأ طرق وإمکانيات جديدة للتصميم. ولدراسة الأنظمة التصميمة التى تقوم على الواقع الافتراضي،سيتم تناول عمارة قائمة على تکنولوجيا المعلومات الخاصة بـأحد إستوديوهات التصميم المعاصرة‘ وکذلک الخلفية النظرية التي تقوم عليها. ومن ثم الوصول إلى نتائج عملية تعمل على رفع المهارات التصميمية والابداعية لطلاب العمارة داخل استوديو التصميم، من أجل التغلب على التفاوت والفروق الکبيرة بين استوديو التصميم فى الجامعات المصرية ونظيره فى مدارس العمارة المعاصرة فيما يتعلق بإستخدام تکنولوجيا المعلومات وتطبيقاتها فى عملية التصميم المعمارى.
https://jaes.journals.ekb.eg/article_19177.html
https://jaes.journals.ekb.eg/article_19177_4f64dc5c670ad7c4d3c775a68c70e3aa.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
العناصر المعمارية للتحکم بالتهوية الطبيعية
1107
1119
EN
أحمد
أحمد
فکرى
قسم العمارة وتکنولوجيا البناء بکلية الهندسة - جامعة القاهرة.
محمد
کریم
محمد أبوالليل
مهندس بشرکة محرم باخوم
10.21608/auej.2017.19178
The research problem lies in the multiple design dimensions of the buildings and the lack of attention to the environmental dimension and its impact on the use of energy in buildings, despite the technological progress that humanity is witnessing day after day to serve man so that he can control the environmental conditions surrounding it, but the emergence of some architectural trends in recent times Which depends on the design of its buildings on the side of luxury and technology and beauty and non-consideration of environmental factors, which led to increased energy consumption and lack of comfort required for occupants of spaces. Therefore, the optimum use of architectural elements for natural ventilation of the interior spaces of the buildings leads to the achievement of energy consumption and achieve the required thermal comfort for humans.<br /> Building enclosure external ventilation is a key factor in providing the thermal comfort and natural ventilation to occupants of the spaces inside the building. Therefore the design should allow proper flow of natural air, so the architectural elements of ventilation control greatly affect the movement and shape of wind flow outside and inside the building, and control the size and speed of internal ventilation of the spaces. ٍo that this study aims at monitoring the most important architectural elements affecting the movement of air flow in the journey to the interior spaces of the building in an attempt to collect these elements in the hands of designers to take into account during the design processes to achieve thermal comfort and energy saving for the principles of sustainability.<br /> تکمن المشکلة البحثية في تعدد الإبعاد التصميمية للمباني وعدم الاهتمام بالبعد البيئي وتأثيره على استخدام الطاقة في المباني، على الرغم من التقدم التکنولوجي الذي تشهده البشرية يوما بعد يوم لخدمة الإنسان حتى يمکنه التحکم في الظروف البيئية التي تحيط به إلا إن ظهور بعض الاتجاهات المعمارية في الآونة الأخيرة التي تعتمد في تصميم مبانيها على جانب الرفاهية والتکنولوجيا والجمال وعدم مراعاة العوامل البيئية, مما أدى إلى زيادة استهلاک الطاقة وعدم تحقيق الراحة المطلوبة لشاغلي الفراغات. لذلک فان تحقيق الاستخدام الأمثل والفعلي للعناصر المعمارية للحصول على التهوية الطبيعية للفراغات الداخلية للمباني يؤدي إلى تحقيق توفير استهلاک الطاقة وتحقيق الراحة الحرارية المطلوبة للإنسان.<br /> وتعتبر التهوية الخارجية لغلاف المباني من العوامل الرئيسية لتوفير الراحة الحرارية والتهوية الطبيعية لشاغلي الفراغات داخل المبنى، لهذا فان التصميم لابد أن يسمح بتدفق مناسب للهواء الطبيعي لذلک فان العناصر المعمارية بالمبنى تؤثر بصورة کبيرة على حجم وسرعة التهوية الداخلية للفراغات وحرکة وشکل سريان الرياح داخل المبنى.<br /> لهذا تهدف هذه الدراسة الى رصد أهم العناصر المعمارية المؤثرة على حرکة سريان الهواء في رحلة وصولة الى الفراغات الداخلية للمبنى, وذلک فى محاولة لتجميع هذه العناصر في ايدى المصممين لاخذها في الاعتبار أثناء عمليات التصميم لتحقيق الراحة الحرارية وتوفير الطاقة تحقيقا لمبادئ الاستدامة.
الاستدامة – التهوية الطبيعية – عناصر التهوية
https://jaes.journals.ekb.eg/article_19178.html
https://jaes.journals.ekb.eg/article_19178_4dc535a313f210f36368dc6ece24f2b9.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
منهج تقنى لإستخدام مصادر الطاقة المتجددة لعمارة إقتصادية دراسة حالة مشروع إسکان إجتماعى دار مصر
1087
1105
EN
علاء الدين
السید
فريد
قسم العمارة ، کليـة الهندسة ، جامعـة الأزهـر
الجندي
شاکر
الجندي
قسم العمارة ، کليـة الهندسة ، جامعـة الأزهـر
إکرام
مصطفى
محمد على
مهندسة معمارية حرة
10.21608/auej.2017.19179
There is no doubt that the spread of modern technology on a large scale change the concept of architecture from just work of art to a scientific approach links the user requirements, the surrounding environmental impacts, modern technology and economic architecture. Here is come the need to study clean energy, especially solar energy, and connect them with the economic aspect in architecture and study the importance and the effectiveness of using such sources in present and future. The research is a technical study for the use of renewable energy sources for making an integrated economic architecture in order to consistent with economic development, instead of relying on traditional energy sources which are threatened with depletion.<br /> مما لا شک فيه أن انتشار التکنولوجيا الحديثة على نطاق واسع قد غيرمفهوم العمارة من مجرد عمل فنى ذا طابع جمالى إلى منهج علمى يربط بين متطلبات المستخدم ، التأثيرات البيئية المحيطة ، التکنولوجيا الحديثة والعمارة الاقتصادية ، فدعت الحاجة إلى دراسة الطاقة النظيفة ، ومن أبرزها الطاقة الشمسية ، وربطها مع الجانب الاقتصادى فى العمارة ودراسة أهمية ومدى فاعلية استخدام مثل هذه المصادر فى الوقت الحالى ، ولذا<strong> يهدف البحث</strong> إلى دراسة تقنية لاستخدام مصادر الطاقة المتجددة للوصول إلى عمارة اقتصادية متکاملة من أجل الوقوف على مسار التنمية الاقتصادية ، کونها معتمدة على مصادر الطاقة التقليدية التى باتت مهددة بالنضوب وبالتالى فى تمويل التنمية ، ويتبع البحث المنهج الاستقرائى والتحليلى والتطبيقى ، للتعرف على أهمية استخدام تکنولوجيات الطاقة الشمسية فى إنتاج عمارة اقتصادية.
الطاقة المتجددة,العمارة الشمسية,النظم الفوتوفولتية,العمارة الاقتصادية
https://jaes.journals.ekb.eg/article_19179.html
https://jaes.journals.ekb.eg/article_19179_54bdb8625607172187105819cf3d08c6.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
INTEGRATING HUMAN-CENTERED DESIGN METHODS IN EARLY DESIGN STAGE: USING INTERACTIVE ARCHITECTURE AS A TOOL
947
960
EN
Zeyad
M
El Sayad
Department of Architecture, Faculty of Engineering, Alexandria University, Egypt
Tarek
Farghaly
Department of Architecture, Faculty of Engineering, Alexandria University, Egypt
Sara
Mohamed
Hamada
Department of Architecture, Faculty of Engineering, Alexandria University, Egypt
10.21608/auej.2017.19180
During the early-1980s the term Human-centered design (HCD) evolved and since then it started to achieve a rapidly-growing attention. It is considered to be a user-incorporated design and development process. This is achieved by primarily understanding the users’ needs in buildings, communities, services, systems and products. HCD methods aim to achieve an ideal space emerging using the human centered interaction scheme. Interactive Architecture is thought to have a great potential in achieving HCD benefits. Therefore, this paper discusses the phenomenon of Interactive Architecture as well as defining the behavior of the human body in order to document and examine the buildings. The research‘s main aim is to incorporate the phases of the Human-centered design into the early design stage of architectural buildings using Interactive Architecture. The methodology is composed initially of a literature survey discussing the Human-centered design in general and then focusing on the methods of creating an Interactive building space. This is then followed by analyzing both aspects in relevant examples. Finally, a matrix is concluded reaching the optimum guideline methods of design in architecture, through integrating HCD methods with Interactive Architecture analyzed examples.
Human-Centered Design,Interactive architecture,Interactive Building Space,Body In Space
https://jaes.journals.ekb.eg/article_19180.html
https://jaes.journals.ekb.eg/article_19180_e168efe0b8ac25ee37dafa3242fbe7b7.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2018
11
15
تطبيقات العمارة المائية فى الاستثمار السياحي بين العالمية والمحلية
1209
1224
EN
إسماعيل
أحمد
عامر
قسم العمارة – کلية الفنون الجميلة – جامعة المنيا
10.21608/auej.2018.19181
العمارة المائية هى العمارة التى لها علاقة بالمياه ، وليست بجديدة فقد تم إستخدام السفن منذ الفراعنة فى الترحال لأعمال التجارة والحروب والسياحة والتى تشتمل على جميع الخدمات والترفيهة ، ولکنها أحد أشکال العمارة المائية وهى عمارة متحرکة ، أما العمارة الثابتة مثل السدود والقناطر والکبارى وبالرغم من أنها تتحمل عنف المياه خلفها إلا أنها ذات بحور صغيرة ومرتکزة على اليابسة حتى بداية القرن الماضى حيث اکتشاف البترول فتم البدء فى إنشاء منصات وقواعد بحرية ولکنها صغيرة وغير سياحية إلى أن بدء التفکير فى إستغلالها فى الأعمال السياحية مثل مطار أو فندق أو متحف مائى لجذب المزيد من السائحين عالميا لزيادة التدفق النقدى بالإضافة إلى تغيير فى الصورة البصرية للمدينة.
العمارة المائية – الجزر الصناعية – العمارة السياحية – السياحة الشاطئية
https://jaes.journals.ekb.eg/article_19181.html
https://jaes.journals.ekb.eg/article_19181_3fe152d4c6a6f4eb325385cf3d69f94b.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
دور برامج محاکاة الرياح في تحسين کفاءة أداء المباني السکنية: دراسة حالة على نماذج إسکان الشباب بمدينة دمياط الجديدة
1133
1151
EN
محمود
محمد
محمد علي عبد الرحمن
قسم الهندسة المعمارية – کلية الهندسة جامعة کفر الشيخ
أسامة
محمد
علي فرج
قسم العمارة - قسم الهندسة المعمارية - کلية الهندسة – جامعة المنصورة
وائل
صدیق
عبد اللطيف مصطفى
قسم العمارة - قسم الهندسة المعمارية - کلية الهندسة – جامعة المنصورة
10.21608/auej.2017.19182
This research highlights the importance of Computational Fluid Dynamics (CFD) simulation software in optimizing building efficiency through studying natural ventilation for both thermal comfort and human health in residential buildings. Besides introducing methodologies used in this regard and ways of validating results such as wind tunnel and in-situ measurements, selecting the appropriate turbulence model and presenting best practices in performing simulation process. Youth housing in New Damietta has been selected as a case study to evaluate natural ventilation inside 3 different prototypes depending on the local weather station wind data. A wind tunnel validated K-epsilon turbulence model has been used for this simulation. The results of this research emphasizes the importance of using simulation software as a credible tools in achieving thermal comfort energy efficiency in residential buildings.<br /> هذا البحث يسلط الضوء على أهمية برامج محاکاة ديناميکا الموائع الحسابية Computational Fluid Dynamics(CFD) في تحسين کفاءة أداء المباني من خلال دراسة التهوية الطبيعية من أجل صحة الإنسان والراحة الحرارية داخل المباني السکنية، وکذلک عرض المنهجيات المستخدمة في ذلک وطرق التحقق من النتائج باستخدام الوسائل التجريبية مثل نفق الرياح او القياس في الموقع. واختيار نموذج العصف المناسب turbulence model وخطوات العمل داخل برامج محاکاة الرياح بناءا على أفضل الممارسات. وتم اختيار نموذج اسکان الشباب بمدينة دمياط الجديدة کحالة دراسية لتقييم الراحة الحرارية داخل الفراغات في ثلاث نماذج مختلفة بناءا على بيانات أقرب محطات أرصاد جوية، وتم استخدام نموذج العصف المعتمد على الطاقة الحرکية (Kinematic energy k) و معدل تبديد الاضطرابات (turbulence dissipation rate Ɛ) والذي يطلق عليه اسم (K-Ɛ turbulence model). نتائج هذا البحث تشير إلى أهمية استخدام برامج محاکاة الرياح کأدوات معتمدة لتحقيق الراحة الحرارية في المباني السکنية وتحسين کفاءة الطاقة.
CFD – Thermal Comfort – Simulation Software – Wind Tunnel – Energy Efficiency,برامج محاکاة الرياح – التهوية الطبيعية – کفاءة أداء المباني – نفق الرياح – برامج المحاکاة – المدن المتوسطة – المباني السکنية
https://jaes.journals.ekb.eg/article_19182.html
https://jaes.journals.ekb.eg/article_19182_f3032a4909b6e1bc1e6dc5327393c813.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
هالک مواد البناء واثره على الاستدامة
1037
1049
EN
أحمد
أحمد
فکرى
أستاذ العمارة وتکنولوجيا البناء بکلية الهندسة - جامعة القاهرة.
محمد
کریم
محمد أبوالليل
ماجيستير الهندسة المعمارية قسم التصميم والتخطيط البيئي جامعة القاهرة
10.21608/auej.2017.19183
Sustainability problem in the construction industry lies in the "how to achieve the lofty environmental goals to the actual practitioners in the construction industry through savings in the financial cost of the project", This problem has emerged clearly now as a result of multidimensional design of buildings and the lack of attention to the environmental dimension and its impact on energy use in buildings, Although the technological advances that mankind witnessed day after day for the service of man so that he could control the environmental conditions that surround it but some trends appearance architectural recently adopted in the design of buildings on the side of luxury, technology and beauty and non-observance of environmental resources and the problem of energy, construction projects at the moment aimed to achieve profit and building function without considering the environmental dimensions of the many resources that are harnessed and lost throughout the building stages to get to its final state.<br /> Because of the rapid increase in the construction industry millions tons of construction and demolition waste generated, that can be reused or recycled. This waste is different from the construction site to another, but the benefits to the reduction, reuse and recycling remain the same, because of the waste in building materials is a waste in the energy consumed in various stages of construction, which is not in line with the concept of sustainability. And the percentage of wastage materials as a result of construction operations in Egyptian projects is up to 25% which represents a spoilage rate in the number of building blocks used. Materials Waste are two type imposed by the nature and conditions of employment for the loss of raw materials during charging, discharging and storage, The other type arises from willful or negligent or poor organization or managing.<br /> For this study aims to identify the causes of waste in building materials in the construction industry during the life cycle of the building in order to control the amount of generated wastage which is seen by developers as wasted money has to be preserved, and seen by the environment as energy and natural ores wasted must be preserved for the next generations in order to achieve the principles of sustainability.<br /> تکمن مشکلة الاستدامة في صناعة التشييد في "کيفية توصيل الأهداف البيئية إلى الممارسين الفعليين في صناعة التشييد عن طريق التوفير في التکلفة المالية للمشروع". حيث ان مشاريع الإنشاء تهدف إلى تحقيق الربح المادي دون النظر إلى الإبعاد البيئية والموارد الکثيرة التي يتم تسخيرها وفقدها إثناء دورة إنشاء المبنى للوصول إلى حالته النهائية.<br /> بسبب التزايد السريع في الإنشاءات تتولد ملايين الأطنان من مخلفات الإنشاءات والهدم التي من الممکن إعادة استخدامها أو تدويرها. هذه المخلفات تختلف من موقع بناء إلى اخر ولکن المنافع في التقليل وإعادة الاستخدام وإعادة التدوير تبقى کما هي, وذلک لان الهالک في مواد البناء يعتبر هالک في الطاقة المستهلکة في مراحل التشييد المختلفة وهو ما لا يتماشى مع مفهوم الاستدامة. وتصل نسبة الفاقد في المواد نتيجة عمليات الإنشاء في کثير من المشروعات في مصر إلى ٢5%] 1[ وهو يمثل معدل الهالک في عدد الوحدات البنائية المستخدمة، والهالک نوعان نوع تفرضه طبيعة العمل وظروفه للفاقد في المواد المصنعة أثناء الشحن والتفريغ والتخزين والوقت الضائع في تنقلات العمال، ونوع ينشأ عن عمد وإهمال أو سوء تنظيم أو إدارة.<br /> ولهذا تهدف هذه الدراسة الى رصد أسباب هالک مواد البناء في صناعة التشييد خلال دورة إنشاء المبنى وذلک لمحاولة السيطرة على کمية الهالک الناتجة والتى ينظر اليها المطورون العقاريون على انها اموال مهدرة لابد من الحفاظ عليها وتنظر اليها البيئة على انها طاقة وخامات طبيعية مهدرة يجب الحفاظ عليها للاجيال القادمة وذلک لتحقيق مبادئ الاستدامة.
الاستدامة – صناعة التشييد – مواد البناء – مراحل المشروع – دورة حياة المبنى – هالک التشييد
https://jaes.journals.ekb.eg/article_19183.html
https://jaes.journals.ekb.eg/article_19183_33e6df285584ce2ee79e54e2be5ab32c.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
التحول العمراني المستدام کمدخل لإعادة التشکيل العمراني"" رؤية مستقبلية لتنمية المدينة المصرية
1018
1024
EN
نورا
محمد
ريحان حسين
قسم الهندسة المعمارية،کلية الهندسة ، جامعة الأهرام الکندية
10.21608/auej.2017.19184
The urbanization of the countryside to urbanism witnessed a lot of urban areas and the suffering of the shortcomings and lack of urban services is no longer just an urban problem, but will become a dimensional complex phenomenon which has low social , economic and environmental characteristics .From this point came the idea of the search: finding an approach to solve the problem of rapid urban transformation and its changes and negative effect on the Egyptian city by adopting a strategy of " sustainable urban transformation" which guarantees urban transformation to the areas in a sustainable way that preserves the environment, and achieve the greatest benefit from the resources and achieve the level of good living for the residents. The research monitors and analyses the "sustainable transition" for one of the best sustainable urban cities in the world (Curitiba city in Brazil), which showed its ability to sustainable urban transition in a sustainable way to ensure preservation of the environment and resources and without any negative effect on any of the social, environmental and economic aspects. Then conclude some features and the factors that can be used to achieve a sustainable transition and then monitors the phenomenon (urban transformation ) and various of its changes in the physical structure of the case study (suburb of Heliopolis) and to identify the most important negatives afflicting the region in Egypt.<br /> إن التحول الحضري من الريف إلى الحضرالذي تشهده الکثير من المناطق العمرانية وما يعانيه من قصور ونقص في الخدمات العمرانية لم يعد مشکلة حضرية فقط ، وإنما أصبح ظاهرة مرکبة الأبعاد تتدنى فيه الخصائص الاجتماعية والاقتصادية والبيئية<strong>.</strong>من هذا المنطلق جاءت فکرة البحث وهى إيجاد مدخل لحل مشکلة التحول العمراني السريع وتغيراته السلبية وتأثيرها على المدينة المصرية من خلال تبنى إستراتيجية "<strong>التحول العمراني المســـــتدام</strong>" الذي يضمن للمناطق العمرانية التحول إلى الحضر بطريقة تحافظ على البيئة ، وتحقق أکبر قدر من الاستفادة من المــــوارد وتحقق مســتوى معيشي جيد للسکان. ويتناول البحث رصد "التحول العمرانى المستدام" لواحدة من أفضل المدن العمرانية المستدامة على مستوى العالم (مدينة کيوريتيبا في البرازيل )التي أظهرت قدرتها على التحول الحضري المستدام بطريقة تضمن الحفاظ على البيئة والموارد و بدون أي تأثير سلبي على أي من النواحي الاجتماعية والبيئية والاقتصادية.ثم استنتاج بعض الضوابط والأسس والعوامل التي يمکن الاستفادة منها لتحقيق تحولا عمرانيا مستداما. وتطبيق تلک العوامل على منطقة الدراسة (ضاحية مصر الجديدة) – هليوبوليس- ورصـد وتحليل ظاهـــــرة (التحول العمراني ) وتغيراته المختلفة في الهيکل العمراني للمنطقة والتعرف على أهم السلبيات التي تعانى منها المنطقة .
urbanization,Urban transition,Sustainability,sustainable urban transition . التحول –التحول العمراني- التحول العمراني المستدام,مدينة المستقبل المثالية
https://jaes.journals.ekb.eg/article_19184.html
https://jaes.journals.ekb.eg/article_19184_a50c38bb92d27048b9d2bb26ce713c03.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2018
11
15
تحسين الأداء الحراري في البيئة الداخلية للمباني السکنية في مصر باستخدام الواجهات الذکية
1225
1241
EN
مراد
عبدالقادر
کلية الهندسة جامعة عين شمس، القاهرة، مصر.
أمل
کمال
محمد شمس الدين
کلية الهندسة جامعة عين شمس، القاهرة، مصر.
بيشوي
مجدی
توفيق
کلية الهندسة جامعة عين شمس، القاهرة، مصر.
10.21608/auej.2018.19185
The waste of energy consumption of our world's is considered most important problems of our life, and seek knowledge in all fields to reduce this consumption and negative effects. In architectural design, they search how to reduce thermal loads in interior spaces of buildings rather than using of mechanical systems that can achieve the appropriate thermal environment in spaces of these buildings without cause high energy consumption. In Egypt is considered to be in hot climates, which requires alternative ways to reduce energy consumption to achieve the thermal environment inside the buildings. The residential sector in Egypt is the highest among various buildings sectors of energy consumption, which makes studying and applying of various environmental treatments by using either of passive cooling or using smart systems or any other solutions by the designer can see to reduce thermal loads into the buildings like new urban communities design. The research suggests the application of some smart systems in facades of residential buildings, thus contributing to the rationalization of energy consumption and control of internal thermal environment into spaces. The research uses one of simulation programs in the residential model currently built in Egypt like (Design Builder) which is building the residential model three-dimensional and select one of the internal spaces to be addressed, testing and studying of thermal building behavior by proposing different alternatives for appropriate treatments and make a comparison between them and choose the best alternative to reach the goal of research by using these systems in reducing annual cooling loads and providing thermal comfort. Finally the research is setting after experimental methodology to put conclusions and recommendations .<br /> يعتبر الإسراف في استهلاک الطاقة من أهم المشاکل العالمية في عصرنا الحالي، ويسعى العلم بجميع مجالاته لترشيد هذا الاستهلاک والحد من تأثيراته السلبية، وقد اعتمد التصميم المعماري لتقليل الأحمال الحرارية الزائدة في الفراغات الداخلية بالمباني على استخدام الوسائل الميکانيکية بدلا من التصميم البيئي المناسب. تعتبر معظم الأقاليم المصرية ضمن المناخ الحار مما يتطلب النظر في سبل خفض وترشيد استهلاک الطاقة التي تصرف لتحقيق البيئة الحرارية المناسبة داخل المباني، ويعتبر القطاع السکني في مصر الأعلى بين قطاعات المباني المختلفة استهلاکا للطاقة کنتيجة لزيادة استخدام الوسائل الميکانيکية، مما يجعله جاذبا لدراسة وتطبيق المعالجات البيئية المختلفة سواء باستخدام وسائل التبريد السلبي أو استخدام النظم الذکية أو أي حلول أخرى يراها المصمم لتخفيض الأحمال الحرارية الزائدة بها خاصة مع نمو الاهتمام بالتصميم البيئي وإدماجه في تصميم المباني بالمجتمعات العمرانية الجديدة. يقترح البحث تطبيق بعض النظم الذکية لمعالجة واجهات المباني السکنية، مما يساهم في ترشيد استهلاک الطاقة والتحکم في البيئة الحرارية الداخلية للفراغات. يستخدم البحث بعض النظم الذکية للتطبيق وکذلک أحد وسائل التبريد السلبي شائعة الاستخدام، واختيار النموذج السکني المبني کعينة للدراسة مع تحديد برنامج المحاکاة المختار للتطبيق وهو برنامج (Design Builder)وهو يقوم ببناء النموذج السکني ثلاثي الأبعاد واختيار أحد الفراغات الداخلية المطلوب معالجتها في الواجهة واختبارها ودراسة سلوک المبنى حراريا من خلال اقتراح بدائل مختلفة للمعالجات المناسبة وعمل مقارنة بينهم واختيار أفضل بديل للوصول إلى هدف البحث، وأخيرا يتوصل البحث لمجموعة من النتائج والتوصيات.
Cooling Loads- Residential Buildings-Smart Facades-Smart Systems- Simulation Programs,الأحمال الحرارية- المباني السکنية- الواجهات الذکية – النظم الذکية- برامج المحاکاة
https://jaes.journals.ekb.eg/article_19185.html
https://jaes.journals.ekb.eg/article_19185_72adf33a8d4466b629460790811b033a.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
مدخل تصميمي لتحسين جودة فراغات المستشفيات باستخدام النانوتکنولوجي
1199
1208
EN
حسين
صبری
الشنواني
قسم الهندسة المعمارية- کلية الهندسة – جامعة الزقازيق
شريف
محمد
ربيع خشبة
قسم الهندسة المعمارية- کلية الهندسة – جامعة الزقازيق
رزان
إبراهیم
أحمد عرفه
قسم الهندسة المعمارية- کلية الهندسة – جامعة الزقازيق
10.21608/auej.2017.19186
Materials are one of the important tools which the architect can’t waive them in his buildings to achieve his thoughts. Materials transformed from secondary role as one of the architectural needs to way to achieve the functionality, provide healthy and safe environment and a means to achieve the new architectural form of the buildings.<br /> Nanotechnology revolutionized the field of architecture and materials technology. The impact of nanotechnology in architectural production appeared in the discovery of materials, new construction systems, advanced implementation mechanism. These led to the opening of new horizons in the design of buildings and raise their performance.
https://jaes.journals.ekb.eg/article_19186.html
https://jaes.journals.ekb.eg/article_19186_b84b351ea94f18e6951fc8c5e71e8044.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
المسکن والإسکان
1061
1075
EN
جمال
محمد
محمود البغدادى
مهندس معماري حر
10.21608/auej.2017.19187
qitae ghazzat juz' min filastina, dhat alttarikh aleariq walladhi yaeud li'aqdim aleusur almuarrakhat bad'aan bialeasr alkaneani wal'iighriqi walrrumani walbizinti waimtidadaan eabr aleusur al'iislamiat wakhassatan almamlukiat waleuthmaniat minha, wawusulaan lileasr alhadith wama shahidath filastin waqitae ghazzat fih min matamie lil'umam biha wdhlk bad'aan bialaintidab albritani wamin thamm alaihtilal al'iisrayiyli I'm a ghwt dhi manij 'uwf mwdirn 'uwf dhi mwmnt 'uwf mudirn.<br /> قطاع غزة جزء من فلسطين، ذات التاريخ العريق والذي يعود لأقدم العصور المؤرخة بدءاً بالعصر الکنعاني والإغريقي والروماني والبيزنطي وامتدادا عبر العصور الإسلامية وخاصة المملوکية والعثمانية منها، ووصولاً للعصر الحديث وما شهدته فلسطين وقطاع غزة فيه من مطامع للأمم بها وذلک بدءاً بالانتداب البريطاني ومن ثم الاحتلال الإسرائيلي والذي ترک وما زال أعمق الأثر في واقع هذه البلاد، ثم انتقل القطاع بعدها لحکم جديد بعد قدوم السلطة الفلسطينية إثر الاتفاقيات الموقعة عام 1994م
https://jaes.journals.ekb.eg/article_19187.html
https://jaes.journals.ekb.eg/article_19187_eb09abcca8686f3bbce848f8175e5da0.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
العمارة المناخية (تقويم البيئة الحرارية للمسکن بالمناطق الحارة الجافة)
1051
1059
EN
جمال
محمد
محمود البغدادى
مهندس معماري حر
10.21608/auej.2017.19188
This study presents a method for evaluation of the thermal environment of housing in hot-dry regions, with the assumption that the prevalent thermal problems in the housing environment in most of these regions are partly a result of official as well as unofficial policies of handling the planning and architectural aspects of thermal performance. The research recognizes two spatial scales for assessment: the housing precinct scale, and the housing unit scale. The assessment method is, therefore, introduced based on qualitative perceptions in this respect, so that it can be applicable at the spatial scales, in which quantitative and instrumental methods cannot be applied for their wide spatial extension. Another element, which can be used in the assessment, is the professionals and the users perception levels. In this respect, the problem can be viewed at the planning and the architectural scales, and from the theoretical, professionals and users viewpoints. Hence, the study specifies theoretical criteria, at each scale and for each level that can be used in assessing the passive thermal performance, and also assessing the perceptions of the associated groups. The study also presents criteria for selecting case studies and samples, the investigation and fieldwork process, data analysis procedures and the testing of conformity or deviation to and from the adopted criteria of assessment and the possible reasons for deviation, extracting of conclusions and the drawing of recommendations. Since the method was actually conducted, the study presents a profile of the samples of the case studies and some of the recommendations, ending up with the advantages and disadvantages of this assessment method.<br /> يطرح هذا البحث منهجاً تقويمياً کمحاولةٍ لتقويم البيئة الحرارية للمسکن في المناطق الحارة الجافة، بافتراض أن المشاکل الحرارية السائدة في البيئة السکنية تشکل نسبة کبيرة في هذه المناطق، نجمت, جزئياً, عن السياسات الرسمية وغير الرسمية في معالجة الجانبين التخطيطي والمعماري للأداء الحراري. ويقوم البحث بتمييز مقياسين فراغيين للتقويم، مقياس المجاورة السکنية، ومقياس الوحدة السکنية. کما يتطرق البحث إلى الأوجه النظرية للتخطيط والتصميم الحراري في هذه المناطق، وأهم المناهج المتعارف عليها في تقويم الأداء الحراري. يقدِّمُ البحث أيضاً منهجاً تقويمياً يقوم على الإدراک النظري والنوعي في هذا الشأن بحيث يمکن تطبيقه على المقياسين الفراغيين المذکورين والذين يصعب فيهما استخدام المناهج الکمية والمعملية لامتداد رقعتهما الفراغية. ويشمل المنهج عنصراً آخراً – إضافةً للأوجه النظرية – يمکن أن يستخدم في عملية التقويم من وجهتي نظر المهنيين والسکان. وبهذا يمکن أن يتم النظر للمسألة على المقياسين التخطيطي والمعماري ومن الزوايا النظرية والمهنية والشخصية العادية. وتبعاً لذلک يقوم البحث بتوصيف معايير التقويم النظرية لکل من المقياسين والمستويين لاستخدامها في تقويم الأداء الحراري السلبي وتقويم أوجه نظر المجموعات ذات الصلة. ويعرض البحث کيفية اختيار الحالات والعينات، وطريقة التقصّي والعمل الميداني، وکيفية تحليل البيانات، واختبار مدى مطابقتها أو انحرافها عن المعايير النظرية وتحديد أسباب الانحراف، واستخلاص النتائج والمؤشرات والحلول والتوصيات. وحيث أن المنهج قد تم تطبيقه فعلاً، فإن البحث يقوم بتقويم نماذج لعينات حالات الدراسة والتوصيات المقدمة بشأنها، إضافةً إلى توضيح ميزات المنهج وما يمکن أن يؤخذ عليه.
https://jaes.journals.ekb.eg/article_19188.html
https://jaes.journals.ekb.eg/article_19188_bcc23cf365a720577e9f0a5e884b506a.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
العوامل المؤثرة علي تکلفة المشروعات خلال مراحل التصميم المعماري
1166
1181
EN
الجندي
شاکر
عبد الغني
قسم هندسة العمارة - کلية الهندسة (بنين) – جامعة الأزهر
فاطمة
عبد الکریم
محمد
قسم هندسة العمارة -کلية الهندسة (بنات) – جامعة الأزهر
10.21608/auej.2017.19189
The issue of increasing the cost of construction projects is of great importance in the field of architecture where construction projects are considered as engineering projects with long-term investment value and are governed by the theories and methods that control the economics of any project. Architecture deals with the human side, which does not measure the success of projects only with the Financial return . in return for the cost of the project. As well as the satisfaction of the needs and requirements of the client, which called for work on this paper, where the search for a design approach in the field of architectural design achieves the quality of design and cost control .<br /> Costing plays an important role throughout the design process. Marketing studies are conducted to see the available cost limits that directly affect the marketing process and then the selling price. It is a key determinant of the selection of project elements and an effective influence in the design process .Where it sets the separation solutions to meet the value based on their relationship with the requirements and needs through the range of economic capacity .<br /> The study deals with the study of the relationship between the stages of architectural design and the cost component in order to reach a proposed approach, which highlights some factors affecting the cost of the project. Projects during these phases.<br /> The research has led to the formulation of a proposed methodology for the architectural design process, which is governed by a set of Factors that establish the proposed approach, formulate a set of considerations and criteria that achieve this methodology, and then produce some conclusions and recommendations for reaching them in order to improve the cost performance of the project.<br /> تحتل قضية زيادة تکلفة بعض المشاريع الإنشائية أهمية کبيرة في مجال العمارة حيث تعتبر ذات قيمة إستثمارية بعيدة المدي وتتعامل العمارة مع الجانب الإنساني الذي لا يقيس نجاح المشروعات فقط بالعائد المادي في مقابل تکلفة المشروع ولکن کذلک بمدي إشباع إحتياجات ومتطلبات العميل وهو ما إستدعي العمل علي هذه الورقة البحثية حيث البحث عن منهج عملي في مجال التصميم المعماري يحقق جودة التصميم مع التحکم في التکلفة ، وتلعب التکاليف جزءا هاما في کافة مراحل العملية التصميمية ويتم عمل دراسات تسويقية لرؤية حدود التکلفة المتاحة التي تؤثر بصورة مباشرة في عملية التسويق ومن ثم سعر البيع وتعتبر محدد أساسي لإختيار عناصر المشروع ومؤثر فعال في العملية التصميمية . <br /> ويتناول البحث بالدراسة والتحليل مشکلة زيادة التکلفة المشاريع بشکل خاص خلال مراحل عملية التصميم المعماري وهو بمثابة العنصر الرئيسي المؤثر علي ما يتبعه من تصميمات ويتم من خلاله دراسة العلاقة بين مراحل التصميم المعماري وعنصر التکلفة بهدف الوصول إلي منهحية مقترحة حيث يلقي الضوء علي بعض العوامل المؤثرة علي تکلفة المشروعات خلال هذه المراحل . وقد توصل البحث للعوامل المؤثرة علي التکلفة خلال مراحل التصميم المعماري تحکمها مجموعة من الرکائز وصياغة مجموعة من الإعتبارات والمعايير ثم الخروج ببعض النتائج و التوصيات للوصول إليها والإستعانة بها في تحسين معدلات أداء المشروع من حيث التکلفة .
Cost control,Architectural design stages,Feasibility study
https://jaes.journals.ekb.eg/article_19189.html
https://jaes.journals.ekb.eg/article_19189_e18ae51f3fdf681e44940d1ea43bb38b.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
الطرق المفضلة لدمج وتوجية وحدات الخلايا الفوتوفولتية بأسطح المبانى دراسة تحليلية لمبانى الإسکان الشعبي بمدينة قنا
1152
1165
EN
محمد
سعد
عطوة
قسم العمارة ـ کلية الهندسة بالقاهرة ـ جامعة الأزهر
هشام
عثمان
عبد الرحمن
قسم العمارة کلية الهندسة بقنا ـ جامعة الأزهر
حسن
عبد الونیس
محمد العمرى
قسم العمارة کلية الهندسة بقنا ـ جامعة الأزهر
10.21608/auej.2017.19190
The global trend began in modern buildings architecture to the development of means that would raise the importance of buildings in terms of suitability for nature and affect it in the long term. The units of photovoltaic is one of these methods that become one the strategic options to meet the future needs of the domestic and global energy but positive returns simple compared to what is produced by traditional methods. Also, it is affected by integration into the buildings to enrich aspects (Environmental- Functional-Electrical) in buildings, especially the formal aspects of the building. As qena city enjoys high rates of solar radiation throughout the year, its buildings are qualification to accept the integration of photovoltaic units.<br /> <strong> </strong>This paper aims to explore the impact of the integration of modules photovoltaic cells in the roof of buildings in qena and comparison between the fine aspects of the building after the integration of these units on the buildings, as well as the multiple ways in integration of photovoltaic cells and the vocabulary of architectural configuration cells on those buildings, especially with the multiplicity of photovoltaic cells modules , the different forms ,and ways to integrate them into buildings. Also, this paper does analytical comparison between several buildings of the existing buildings in Egypt and applied by the photovoltaic modules systems and study the impacts when adding these modules are on different roofs<br /> بدأ الاتجاه العالمي في عمارة المباني الحديثة الى استحداث وسائل من شأنها أن ترفع من قيم المباني من حيث ملائمتها للطبيعة وتؤثر فيه على المدى الطويل، من بين هذه الوسائل ما يسمى "بالوحدات الفوتوفولتيه"، حيث أصبحت من المجالات الواسعة للدراسة في الآونة الأخيرة، وتعتبر الخلايا الفوتوفولتية إحدى الخيارات الاستراتيجية لتلبية الإحتياجات المستقبلية من الطاقة المحلية والعالمية ولکن بمردود بسيط نسبة الى ما ينتج من وسائل تقليدية، کما أنها أثرت من خلال دمجها في المباني إلى إثراء الجوانب المتعددة (البيئية – الوظيفية - الکهربية) في المباني، وعلى رأسها الجوانب الشکلية للبناء. وحيث تحظى مدينة قنا بنسب مرتفعة من الإشعاع الشمسي على مدار العام، مما يؤهل مبانيها لتقبل دمج الوحدات الفوتوفولتية عليها، ومع تعدد وحدات الخلايا الفوتوفولتية واختلاف أشکالها وطرق دمجها في المباني، يهدف هذا البحث الى استکشاف الحالات المفضلة لدمج وتوجية وحدات الخلايا الفوتوفولتية في أسطح المباني، وکذا الطرق المتعددة للتکامل بالخلايا الفوتوفولتية على الأسقف المتعددة، ثم دراسة تحليلية لمباني الاسکان الشعبي بمدينة قنا، ومعرفة افضل الطرق المناسبة لتوجية الخلايا الفوتوفولتية عليها.
الوحدات الفوتوفولتية,التوجية,مدينة قنا,الإسکان الشعبي
https://jaes.journals.ekb.eg/article_19190.html
https://jaes.journals.ekb.eg/article_19190_092a465642b8464e399fa1314b08e37f.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
ANALYTICAL COMPARISON BETWEEN INFORMAL-RANDOM-HOUSING AND GRAVEYARDS HOUSING –A CASE STUDY-HOUSING INSIDE THE NORTHERN GABANA AREA, IN CAIRO CITY
1242
1252
EN
Mohammed
Mohamed
Abdulhameed
A teacher at the Department of Architecture, College of Engineering – Al-Azhar University
10.21608/auej.2017.19191
The informal residential areas have emerged in cities as a result of successive migrations from the countryside to cities, which have witnessed a large urbanization that was not matched by rural development. Employment opportunities and services in these cities became attracting factors, while rural areas were unable to provide job opportunities due to the population growth and lack of basic services which is called expulsion factors, this has led to the flow of migratory flows from rural areas to main urban centers. Because of the inability of these centers to supply housing for such newcomers, they have settled this problem themselves, which has emerged in the form of informal-random -extensions around residential communities, urbanization and expansion in urban areas. These areas have become an essential part of the urban structure of cities. Migration may be external to one country due to the economic life of that country, in the form of labor needed by that country in its urban development. So, the study deals with studying one of the areas that represents the model of a pattern of informal-random- housing, which is an extension of villages and their cohesion with the city, where these villages have become part of the urban fabric of the city as well as one of the forms of its informa l –random- growth<br /> تعد مشکلة العشوائيات في مصر من اهم المشاکل الحالية والتي يعتمد حلها على عدة محاور منها المحور الاقتصادي والمحور المعماري والمحور القانوني وغيرها، والدراسة قامت بتحليل بعض أهم الخصائص والسمات المميزة لأنماط الإسکان العشوائي والدراسة قامت بسرد بعض الحلول المقترحة لهذه المشکلة من بعض الجوانب.<br /> ظهرت المناطق العشوائية بالمدن نتيجة لهجرات متعاقبة من الريف إلى المدن والتي شهدت تحضر کبير لم يقابله تنمية ريفية، فقد أصبحت فرص العمل والخدمات بهذه المدن عوامل جذب في حين عجزت المناطق الريفية عن توفير فرص عمل للزيادة السکانية بها بالإضافة إلى افتقارها إلى الخدمات الأساسية وذلک ما يطلق عليه عوامل الطرد حيث أدى ذلک إلى تدفق تيارات الهجرة من الريف إلى المراکز الحضرية الرئيسية، ونظراً لعجز تلک المراکز عن تدبير الإسکان لهؤلاء القادمين الجدد فقاموا بحل هذه المشکلة بأنفسهم وهو ما ظهر في شکل امتدادات عشوائية حول التجمعات السکنية، وبتطور العمران والتوسع في المناطق الحضرية أصبحت تلک المناطق جزء أساسي من الهيکل العمراني للمدن، کما قد تکون الهجرة خارجية من بلد لآخر نتيجة لظروف الحياة الاقتصادية لتلک البلد في شکل أيدي عاملة تحتاجها تلک البلد في تطوراتها العمرانية. لذا يتناول البحث دراسة أحد المناطق التي تمثل نموذج لنمط من أنماط الإسکان العشوائي وهو امتداد القرى وتلاحمها مع المدينة فقد أصبحت هذه القرى جزء من النسيج العمراني للمدينة واحد أشکال النمو العشوائي بها.<br /> وذلک بهدف الوصول إلى نمط سکني متجانس يعبر عن شخصية ساکنيه بشکل منتظم ومستمر دون إخلال بالنمط العمراني لأي منطقة وکذلک دراسة إسکان المقابر.<br /> <strong> </strong>
(Informal –Random-Housing-Graveyard Housing-Characteristics Of,Informal Housing-Housing Patterns-Evaluation Of Informal Random,Housing)
https://jaes.journals.ekb.eg/article_19191.html
https://jaes.journals.ekb.eg/article_19191_2aca4616c8c5e38f6a83e4c27a5ca7ea.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
A 2D NUMERICAL AND EXPERIMENTAL INVESTIGATION ON THE PRESSURE FLUCTUATIONS INSIDE A DOUBLE VOLUTE CENTRIFUGAL PUMP AT THREE DIFFERENT RADIAL GAPS
907
931
EN
Ahmed
S
Mansour
Faculty of Engineering, Ain Shams University, Mechanical Power Department
H
A
Abotaleb
Faculty of Engineering, Ain Shams University, Mechanical Power Department
10.21608/auej.2017.19192
Pressure fluctuations in centrifugal pumps are one of the most traumatic issues that exist as a result of the interaction between the rotor "impeller" and stator "volute". The experiments that were carried out on the double volute pump model in Saudi Arabia have proved that the radial gap "clearance" between the impeller and the tongue of the volute plays a major role in increasing and decreasing that vibrations that are generated due to the pressure fluctuations. Unsteady 2D simulations were carried out on the model to study the pressure fluctuations especially at the critical locations such as around the impeller , the cutwater, and the volute tongue. The results show that the sliding mesh technique is a very useful procedure for simulating these kinds of simulations. The results also show that the peak of the pressure fluctuations occurs at the first blade passing frequency for the 3 gaps "2, 3.6, 7"mm. Numerical static pressure was captured accurately for each gap but the amplitude of the pressure fluctuations were overestimated due to the inaccurate nature of the 2D simulations. The highest gap "7 mm" is the best solution for the vibrations and noise reduction due to the decrease in the pressure fluctuations without affecting the performance of the pump greatly. The performance curves are discussed.
https://jaes.journals.ekb.eg/article_19192.html
https://jaes.journals.ekb.eg/article_19192_e3dc09997147c0668874ac87af794665.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
THEORETICAL INVESTIGATION OF EGYPT CLIMATE CONDITIONS ON THE PERFORMANCE OF PEM FUEL CELL
852
867
EN
Mohammed
H
koura
Teaching Assistance, Higher Technological Institute Tenth of Ramadan City
Salah
H
El. Emam
Mechanical Power Eng. Dept., Faculty of Engineering, Mansoura University
M
G
Mousa
Mechanical Power Eng. Dept., Faculty of Engineering, Mansoura University
A
A
Hegazi
Mechanical Power Eng. Dept., Faculty of Engineering, Mansoura University
10.21608/auej.2017.19193
This paper describes a theoretical model to investigate effects of different air parameters on the performance of PEM fuel cell. Parameters taken into considerations in the study are air mass flow rate, pressure, temperature and relative humidity. This study is applied on a fuel cell with a across section area of 218 cm<sup>2</sup> stacked in a series of combined 110 cells. The observed effects on the fuel cell performance are presented as system power, efficiency and polarization curves. The stacked cells may produce an overall power output more than 20 kW, this model studies the effects in two cases the first with constant relative humidity effect, and the second with different relative humidity effect. This model monitor the effects on PEMFC performance by using the V-I polarization curves. It showed that with the increase of air pressure, temperature and relative humidity the power increases nearly up to 8 %, in the other hand with the increase of air flow rate the performance is decreasing. <br />
PEMFC,Transient,polarization curves,Relative humidity. Nomenclature
https://jaes.journals.ekb.eg/article_19193.html
https://jaes.journals.ekb.eg/article_19193_1327f1dc09582444a19af5d67f7daaa7.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
AN ANALYSIS METHODOLOGY OF THE EFFECT OF USING DIFFERENT TRACKING TIME-STEPS ON THE NET ENERGY GAIN OF A CSP POWER PLANT
868
876
EN
Ahmed
M
Elsayed
Mechanical Engineering Department, , (Mechatronics Branch) The Higher Technological Institute, Sharqiya,Egypt
A
Elsamahy
Electrical power & Machine Department, Helwan University, Cairo, Egypt
M
Rady
Mechanical Engineering Department, Helwan University, Cairo, Egypt
M
A
Amin
Academy of Scientific Research and Technology, Cairo, Egypt
10.21608/auej.2017.19194
in central receiver solar power plant, heliostat tracking accuracy affects the optical efficiency and the amount of energy received at the target. In the present article, an integrated analysis of the effect of using different solar tracking time-steps on the energy consumption and gain of a central receiver system is developed. The drive system energy consumption is calculated by using a Solidworks model of the heliostat mechanical drive system. This Solidworks model is interfaced to a Labview model containing the model of the electrical drive and control systems. The solar energy collected at the receiver is calculated using Monte Carlo ray tracing software.
Heliostat solar system,Electric Drives,LabVIEW,Solidworks,energy
https://jaes.journals.ekb.eg/article_19194.html
https://jaes.journals.ekb.eg/article_19194_6765660dde73ae8ca0f51fffbadb91d9.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
A COST ESTIMATION MODEL FOR MACHINING OPERATIONS; AN ANN PARAMETRIC APPROACH
878
885
EN
Mostafa
R
Atia
Mechatronics Dept., Faculty of Engineering, AASTMT, Cairo, Egypt.
Jean
Khalil
Mechatronics Dept., Faculty of Engineering, AASTMT, Cairo, Egypt.
Mahmoud
Mokhtar
Higher Technological Institute Tenth of Ramadan City, Cairo, Egypt
10.21608/auej.2017.19195
The estimation of machining cost is one of the most important factors in the industry of metal products machining. Many approaches exist for the pre-calculation of the cost of machining for metal made products; but these approaches vary in complexity, requirements and therefore in their own cost. In recent years, the need for a cost effective methodology that intend to estimate the cost of machining of a given product has become more and more obvious; especially when the product is produced in small quantities where the cost of the study has to be kept to a minimum. In job shop facilities, precise classical cost calculation is too difficult due to the varieties infiniteness of workpieces in terms of features and of dimensions. A common practice is to calculate the manufacturing cost of the workpiece as a function in the machining time; however, machining time calculation itself is a costly and lengthy operation. More recently, the parametric estimation method has been adapted as a shorter way for estimation machining cost and / or time. This method needs much experience within the field of manufacturing, which lays in the human factor namely the expert. The experts judgments involve two drawbacks, first, it requires a good deal of acquired information; second the judgments are subject to evolution with the experts development.<br /> In this paper, a new estimator based on the artificial neural network (ANN) is developed to replace both methods that relied either on the expert engineer or on the detailed process sheet for the assessment of machining time. The proposed tool uses the ANN to estimate the machining time using training cases, which are collected from real machining operations. The ANN input is a set of parameters related to the workpiece under consideration and to the specific cutting operation variables. The developed and trained ANN proved to be acceptably accurate in estimating the machining time of various case studies.
parametric study,Cost Estimation,Machining operations,Artificial Neural Networks
https://jaes.journals.ekb.eg/article_19195.html
https://jaes.journals.ekb.eg/article_19195_05250c93516f2ed41790b7adf46de187.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
سياسات إعادة أعمار المدن في فترة ما بعد النزاعات والحروب
1183
1197
EN
بکر
هاشم
بيومي أحمد
قسم التخطيط العمراني- کلية الهندسة – جامعة الأزهر
علي
محمد
السويداني
قسم العمارة - معهد الجيزة العالي للهندسة والتکنولوجيا
10.21608/auej.2017.19196
إن دراسة "ظاهرة الحروب والکوارث" مرتبطة ارتباطاً وثيقاً بإعادة الإعمار، حيث يُشکل هذا المفهوم أحد عناصر مقاومة المجتمع لحالة الدمار کما يعتبر أحد أهم وسائل بناء السلام من خلال الإعمار الاقتصادي والسياسي والثقافي للمجتمعات بما يسهم في ترميم الذاکرة المتصدعة للمدينة وامتصاص الصدمة لدى أبناء المجتمع فيرى الباحثين -Hesloot and Ruitenberg " إن استجابة المواطن خلال الکوارث يمکن أن تنهار وتصل إلى مرحلة الإحباط، وتتأثر هذه الاستجابة بالإجراءات التي يتم اتخاذها والتي تتمثل في تهيئة الإسعافات الطبية , المأوى... .الخ ومرحلة إعادة الإعمار".
https://jaes.journals.ekb.eg/article_19196.html
https://jaes.journals.ekb.eg/article_19196_387d3acb7e5ce5928deb3bc111123cc0.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
تطبيق أليات الإدارة البيئية فى عقود الشراکة مع القطاع الخاص في مشروعات المياه والصرف الصحى
697
977
EN
احمد
محمد
سليم
کلية التخطيط الإقليمي و العمراني – جامعة القاهرة
عبد الفتاح
أبو الليل
کلية التخطيط الإقليمي و العمراني – جامعة القاهرة.
محمد
رضا
حجاج
کلية التخطيط الإقليمي و العمراني – جامعة القاهرة.
10.21608/auej.2017.19197
Infrastructure Water and Sanitation projects are do have an environmental, urban, social and economic impact on countries and reflect their progress in spite of the delay of sanitation services in rural areas in Egypt. The percentage of households covered by the public sewer network in urban areas is estimated at 89% in rural areas where 42 million people suffer from the lack of these services, while the wastewater treatment service has only 6 % of Egyptian villages. This has led to serious environmental problems, especially in the villages of the Nile Delta (due to high population density), where the groundwater level is high and the level of soil filtration is low. This paper discusses the current situation of the water and sewage system in Egypt, as well as the reasons behind the delay in implementing this type of service projects of various types, in addition to some factors that determine the effectiveness of providing this type of services by the public and private sectors alike through previous global experiences.<br /> The study also discusses the concept of environmental management and its consideration and implementation mechanisms, which can be linked with water and sanitation projects to achieve environmental sustainability by taking these considerations and mechanisms as indicators of relative weights to evaluate this type of projects at different stages from the identification of the need to the stage of operation, management and rehabilitation.<br /> The research presents tools and mechanisms of achieving partnership between the public and private sector, its different types of partnership that can be activated in water and sanitation projects. The research dealt with the experience of India in dealing with the water and sanitation problem and its study of the proximity of its urban measurement indicators with Egypt by studying the types of partnership contracts applied in this experiment.<br /> تعتبر مشروعات المياة والصرف الصحى من <strong>مشروعات البنية الاساسية</strong> التى لها مردود بيئي واجتماعى واقتصادى واعد على الدول وتعکس تقدمها. وقد کان لتأخر خدمات الصرف الصحي للمناطق الريفية فى مصر حيث تُقدر نسبة الأسر التي تغطيها شبکة الصرف الصحي العمومية في المناطق الحضرية بنحو 89%، مقارنةً بنحو 12% في المناطق الريفية التي يعاني فيها 42 مليون نسمة من نقص هذه الخدمات، أما خدمة معالجة مياه الصرف فلا يتمتع بها سوى 6% من القرى المصرية. وقد ادى ذلک الى <strong>مشاکل بيئية خطيرة</strong> وخصوصا فى قرى دلتا النيل (نتيجة للکثافة السکانية المرتفعة) حيث يرتفع منسوب المياه الجوفية وينخفض مستوى ترشيح التربة ويترتب على ذلک فيضان مياه الصرف الصحي إلى الشوارع و قيام السکان بتفريغ خزانات الصرف الصحي التي تقوم بتجميعها في المصارف الزراعية مباشرة ، ونتيجة لارتفاع منسوب المياه الجوفية والتخلص من مياه الصرف غير المعالجة، ترتفع نسبة تلوث مصادر المياه العذبة في مصر ، مما يعرض صحة ملايين المصريين إلى الخطر.<br /> وحيث ان متوسط نصيب الفرد في مصر أصبح أقل من حد الفقر المائى المقدر بـ1000 متر مکعب للفرد في العام وهو الآن حول 700 متر مکعب تقريبا، ومن المتوقع انخفاضة ليصل الى 350 متر مکعب عام 2050 م للفرد نتيجة للزيادة السکانية المتوقعة وبناء سد النهضة باثيوبيا مما يستدعى الحفاظ على مورادنا المائية والحد من تلوثها وذلک من خلال وضع استراتجيات واليات تضمن حقوق الاجيال القادمة من هذا المورد الذى لايمکن الحياة بدونة.<br /> ومن هذا المنطلق فأن البدء فى استکمال تنفيذ مشروعات الصرف الصحى ومعالجة المخلفات الصلبة وخصوصا فى الريف المصرى اصبح ضروريا لتجنب تلوث المياة العذبة والحفاظ عليها والحد من المخاطر البيئية والصحية والاجتماعية الناتجة عن تردى الخدمة فى هذا القطاع ونظرا لارتفاع تکلفة هذا النوع من المشروعات والتى قدرت بحوالى (100) مليار جنية مصرى وضعف قدرة الحکومة على تمويلها وخصوصا مع ارتفاع عجز الموازنة العامة لمصر والذى تجاوز (237) مليار جنية مصرى عن العام المالى 2015 / 2016 والذى من المتوقع وصولة الى (319) مليار جنية مصرى عن العام المالى 2016/ 2017 مما يستلزم توفير مصادر تمويلية بديلة لتنفيذ هذة المشروعات.<br /> <br /> و تقترح هذة الدارسة اطار لتنفيذ مشروعات المياة والصرف الصحى بالشراکة مع القطاع الخاص من خلال تطبيق اعتبارات واليات الادارة البيئية و دراسة حالة للهند کاحد الدول التى طبقت نظام الشراکة فى هذا المجال.
الادارة البيئية – عقود مشروعات المياة والصرف الصحى – الشراکة مع القطاع الخاص Sustainable environmental management,establishment and management of sewage contracts,private sector
https://jaes.journals.ekb.eg/article_19197.html
https://jaes.journals.ekb.eg/article_19197_9f5ca74ee8227b0ea301ecf83e9239c3.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
COMPUTATIONAL INTELLIGENT ALGORITHMS FOR ARABIC SPEECH RECOGNITION
886
893
EN
Mohamed
Sadek
Ahmed Rashwan
B.Sc. Of Computer and Systems Engineering Dept.
Al Azhar University, Faculty of Engineering, Computer and Systems Engineering
Reda
Hessian
Abo Al Ez
B.Sc. Of Computer and Systems Engineering Dept.
Al Azhar University, Faculty of Engineering, Computer and Systems Engineering
Gamal
Abd El reheem
B.Sc. Of Computer and Systems Engineering Dept.
Al Azhar University, Faculty of Engineering, Computer and Systems Engineering
10.21608/auej.2017.19198
One of the most term in the biometric technologies is the voice recognition. Speech recognition is a complicate problem .But in today's society when technology is consistently striving for voice driven implementation, speech recognition can be a very useful system .This paper aims to build a system of voice recognition using two systems one of them is based on Fourier descriptors of speech and the other is Artificial neural network which is using back propagation algorithm in neural networks, The first speech recognition system is using Fourier descriptor of speech to get four formants of any speech signal. The second intelligent system is built neural network which is trained and tested using data sits of formants of speech signals. After we applied two systems for speech, the first method is not accurate because it depends on the human element in comparison and identification. This method makes it possible to have the error ratio greater than the second method, which is smart and accurate and depends on the intelligent system stable and continuous and has no life As well as not influenced by the external influences that might control the decision in the first method.
Voice Recognition .Fast Fourier Transform (FFT),Artificial Neural Network (ANN),Back-propagation
https://jaes.journals.ekb.eg/article_19198.html
https://jaes.journals.ekb.eg/article_19198_07dd9dc1b827f953b9fea4d75b3cd6aa.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
PERSUASION BASED RECOMMENDATION SYSTEM
894
899
EN
Sarah
Mahmoud
Department of System and Computer Engineering, El-AZhar University, Cairo, Egypt
Reda
Abo Alez
Department of System and Computer Engineering, El-AZhar University, Cairo, Egypt
Fawzy
EL-Refai
Department of System and Computer Engineering, El-AZhar University, Cairo, Egypt
10.21608/auej.2017.19199
Persuasive role in Recommendation Systems operates like motivators influencing users to buy the recommended items. In this study, we rely upon the well established explanations of six Cialdini’s Principles to enrich recommendation system with explanations and examine their effect on the persuasive power of recommendation item. The results of the experiment revealed that all six Cialdini’s Principles positively affect user’s influnce about the recommended book while reciprocity and authority seem to be the more effective ones. These indicate that a user’s intention to purchase a recommended item is increased if the item is accompanied with a persuasive explanation.
Persuasion,Recommender Systems,Cialdini’s Principles
https://jaes.journals.ekb.eg/article_19199.html
https://jaes.journals.ekb.eg/article_19199_3a013d227e53897e1a3da51abe37bc44.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
44
2017
07
01
HUMAN ACTIVITY RECOGNITION SYSTEM (HARS) USING HISTOGRAM OF NORMALIZED FOURIER DESCRIPTOR
933
945
EN
Hanan
Samir
Housing and Building National Research Center
Hossam
Abd Elmunim
Computer and Systems Engineering Dept., Faculty of Engineering, Ain Shams University
Gamal
Aly
Computer and Systems Engineering Dept., Faculty of Engineering, Ain Shams University
10.21608/auej.2017.19200
This paper presents a system, which is able to recognize different continuous human activities in real time from videos using a single stationary camera. The proposed system has a motion descriptor, Called histogram of normalized Fourier descriptor of object contour. After image segmentation the proposed system extract the object contour and estimate the FD ”Fourier descriptor” of that contour then normalize FD to cancel the effect of starting point variation ,Rotation and Scale. The histogram of the normalized Fourier descriptor is used as a feature vector.The authors used three methods for classification Support Vector Machine,One versus all support vector machine and Naive Bayes classifier. The classification by using SVM shows better performance than other methods. Experimental results on two data sets weizman and KTH validate the proposed system reliability and efficiency.
HumanActivity,Recognition,Fourier Descriptors,Object contour
https://jaes.journals.ekb.eg/article_19200.html
https://jaes.journals.ekb.eg/article_19200_f3b1184471e4c8aecd54021482a3440b.pdf