Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
A NUMERICAL STUDY OF PRECAST BEAM-COLUMN MOMENT CONNECTIONS UNDER COLUMN REMOVAL SCENARIO
175
185
EN
Mariam
Ehab
Departement of civil Engineering, British University in Egypt
Hamed
Salem
Faculty of Engineering, Cairo University
Mohamed
Abdel-Mooty
Faculty of Engineering, Cairo University
10.21608/auej.2017.19259
Precast concrete structures become widely used recently due to high quality of manufacturing as well as its good behaviour under gravity .However the most critical part in the precast structures is beam to column connections in precast frame system due to the different variables involved in the assemblages. In this paper a study is carried out on different wet beam column connections under column removal scenario to observe the behaviour of the connections due to progressive collapse. Different column removal locations with different frame arrangements is studied. The Applied Element Method is implemented in the study to construct a 3D detailed model of the studied connections by using Extreme Loading of Structures Software. The performance of the connections is presented in terms beam, column and joint behaviour. Maximum beam deflection, rotation and internal axial force, normal and shear stresses of the connection reinforcement as well as the column behaviour in terms of rotation and internal axial forces are discussed. From the results obtained an enhancement design is suggested for the failed connections and studied its effect in resisting the local failure due to column removal.
progressive collapse analysis,precast concrete connections,RC corbels,special moment frames,Applied Element Method
https://jaes.journals.ekb.eg/article_19259.html
https://jaes.journals.ekb.eg/article_19259_71778c288146c7334a635b95defc770e.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
تشکيل مسارات الحرکة داخل المناطق السکنية لتدعيم الانتماء للجماعة والمکان
254
266
EN
هبه
محمد
جمعه محمد
قسم الهندسة المعمارية - کلية الهندسة – جامعة القاهرة
10.21608/auej.2017.19260
Forming urban spaces has an effective role in strengthening social relations among residents and the sense of belonging. This paper discusses how to forming the movement paths - as one of the urban spaces - for strengthening the sense of belonging, and determines the path design elements that support sense of belonging to both the place and community
أسلوب تشکيل الفراغات العمرانية ذو دور مهم وفعال في تقوية العلاقات الاجتماعية بين السکان وتدعيم الشعور بالانتماء للمکان، وتهدف هذا الورقة إلى مناقشة کيفية تشکيل مسارات الحرکة -باعتبارها أحد الفراغات الحضرية - لتدعيم الشعور بالانتماء، وتحديد العناصر التصميمية للمسار التي تدعم الانتماء سواء للجماعة أو المکان.
https://jaes.journals.ekb.eg/article_19260.html
https://jaes.journals.ekb.eg/article_19260_e11bdc01d8ccb3846d47d38116bdae80.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
التغيرات السياسية والاقتصادية وتأثيرها على ملامح القرية المصرية (من ثورة 23 يوليو 1952م – إلى ما بعد ثورة 25 يناير 2011م)
236
252
EN
هشام
احمد
محمد صبح
قسم الهندسة المعمارية - کلية الهندسة– جامعة الازهر بالقاهرة
احمد
مصطفی
ابراهيم مبروک
قسم الهندسة المعمارية - کلية الهندسة– جامعة الازهر بالقاهرة
رضا
محمود
حمادة علي
قسم الهندسة المعمارية - کلية الهندسة– جامعة الازهر بقنا
ايمن
خلف
شلقامي احمد
قسم الهندسة المعمارية - کلية الهندسة– جامعة الازهر بقنا
10.21608/auej.2017.19262
الأصلي والمناطق المحيطة بها – متأثرة بالعديد من المتغيرات السائدة في کل مرحلة, والتي تعد انعکاسا للظروف السياسية والاقتصادية، والتي جاءت کنتيجة لعلاقاتها المتبادلة مع محيطها الحيوي. لذلک تحاول الورقة البحثية الحالية رصد مدى تغير ملامح القرية المصرية ومدى تأثير المتغيرات السياسية والاقتصادية عليها منذ قيام ثورة 23 يوليو 1952م. (لما أحدثته من تغير
ملوحظ فى نمط السکن و انقلاب الرى من الحوضى إلى الدائم والذي يعتبر إنقلابا جذريا, وقانون الاصلاح الزراعي) . ثم فترة التحول الإشتراکي والخطة الخمسية, ثم بعد ذلک انکماش معدل التنمية فى الريف المصرى فى الفترة مابين حربى 1967 و1973م ، نتيجة توجيه الاقتصاد المصرى نحو إعادة بناء القوات المسلحة، ثم تأتي فترة ما بعد حرب أکتوبر 1973م , حيث التحول الذى أحدثه البترول فى اقتصاديات الطاقة العالمية سنة 1973، والذي کان من أهم نواتجه زيادة هجرة العمالة الزراعية إلى الدول النفطية، فکان له تأثيرا قويا فى التقنية الزراعية فى مصر, وسياسة الإنفتاح التى بدأتها الدولة فى السبعينات والتى واکبتها الرغبة فى الثراء السريع, وتطور الخدمات التعليمية وإنشاء الجامعات الإقليمية, وما استتبعه من ارتفاع نسبة المتعلمين بالريف, والذى کان له تإثير فى توجيه وتوعية الفلاحين. ثم تاتي بعد ذلک ثورة 25يناير 2011م, حيث استغل بعض الانتهازيين الأوضاع الأمنية السيئة وحالات الانفلات الامنى التى عاشتها البلاد بهجمة تعديات شرسة على الأراضى الزراعية بالمحافظات, سواء بالبناء بإنشاء الآلاف من المبانى المخالفة أو بالتبويراو صورة من صور التعدي علي الارض الزراعية. ومن أهم النقاط التي توصل اليها البحث هي تغير ملامح القرية المصرية المعاصرة عما کانت علية في الماضي, وظهور سمات وملامح جديدة أهمها محاولة تحويل القرية الى مدينة, حيث تمر القرية المصرية الحالية بمرحلة وسطية بين الريف والحضر, ولذلک يوصي البحث بضرورة أن تکون اساليب التطوير في القرية موازية لتلک التغيرات التي تحدث في القرية, وليست متعامدة عليها أومضادة لها, بشتى الطرق والوسائل, بما يتوافق مع الظروف البيئية والهُوية للقرية المصرية .
التغيرات السياسية – ملامح القرية المصرية,القرية – ثورة 23يوليو – الانفتاح الاقتصادي – ثورة 25يناير
https://jaes.journals.ekb.eg/article_19262.html
https://jaes.journals.ekb.eg/article_19262_2c50832436da9b6e981a70d8a6ebd27c.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
المؤشرات التخطيطية لتنمية مواقع السياحة الصحراوية البيئية (منتزه الحجر الصحراوى بإقليم العلا بالمملکة العربية السعودية -کدراسة حاله)
358
376
EN
إبراهيم
حسن
إبراهيم شرف الدين
قسم الهندسة المعمارية – کلية الهندسة بشبرا – جامعة بنها
10.21608/auej.2017.19263
Design processes in rough desert areas (especially version sites which have unique nature) requires some important design considerations through the concept of desert tourism environmental (Eco - Desert Tourism). In accordance with the International Union for the Conservation of Nature (IUCN) could define the environmental tourism as: Tourism and Travel directed toward natural areas that conserves the environment and improves the well-being of local people in order to enjoy the natural environment and thus appreciation of environmental areas. It is also to enjoy the features of the current or old cultural characteristics which require the preservation and protection. Eco-desert tourism is one of the sub-components in the field of sustainable tourism. It is one of the forms of simple sustainability adopted on the natural environment which include elements and other tourist associated with desert tourism and touristic cultural heritage.
<strong><span style="text-decoration: underline;">The aim of the paper is directed to</span></strong> identify the most important indicators and design criteria for design and management and operation for environmental tourism projects in the desert areas in sites which have natural heritage, cultural environmental and social signature. Developing these areas requires a sustainable manner and makes them a tourist attraction to ensure clean environment for the longest possible periods. The main objective of this paper is providing design criteria and indicators to supply investors and operators a simple Manual to be applied before the operation of their projects to increase the quality of sustainable tourism product. <strong>Paper methodology depends on</strong> practical experience of the researcher through participating in a field study for the preparation of touristic development plan of Al-Ola region located in 400 km in the north of Medina menoura at KSA. This region has a special desert natural and historic culture. It was one of the most important pilot projects in the touristic development plan of Al-Ola region as Al-Heger desert Park. This project was done by the concept of sustainable tourism development to identify the most important indicators and design criteria as guidelines for the design process of the project as well as the operational management. <strong>A manual of guidelines for the design criteria and indicators is concluded at the end of paper.</strong> This manual serves as main guide for investors, developers and operators. It have main seven corridors which include 47 elements of indicators (guidelines) for planning, design, development, and operation of ECO-Desert Touristic sites.
تطلب عمليات التصميم في المناطق الصحراوية الوعرة وخاصة المناطق البکر ذات الطبيعة الخاصة بعض الأعتبارات التصميمية الهامة من خلال مفهوم السياحة الصحراوية البيئية ( Eco Desert Tourism ) و طبقاً للاتحاد الدولى للحفاظ على الطبيعة(IUCN) يمکن تعريف السياحة البيئية بأنها: السياحة والسفر الموجه تجاه البيئة من خلال زيارة المناطق الطبيعية البکر وذلک بهدف الاستمتاع بالبيئة الطبيعية وبالتالي التقدير البيئي أو الاستمتاع بالسمات والخصائص الثقافية الحالية أو القديمة والتى تتطلب عمليات الحفاظ والحماية، ولذلک فهى تعتمد على إحداث أقل قدر من التأثيرات السلبية للزائرين والإمداد بالفوائد الإجتماعية والإقتصادية الفعالة من الترابط تجاه المجتمع المحلي. والسياحة البيئية هى أحد المکونات الفرعيةفي مجال السياحة المستدامة Sustainable Tourism وهي أحد أشکال الاستدامة البسيطة المعتمدة على البيئة الطبيعية والتى تتضمن العناصر السياحية الأخرى المرتبطة بالسياحة الصحراويه وسياحة التراث الثقافي.
<strong>وتهدف الورقة البحثيه إلىاأعداد دليل ارشادي لتحديد أهم الضوابط والمؤشرات لعمليات التصميم والإدارة والتشغيل</strong> لمشروعات المناطق ذات الحساسية البيئية المتمثل في التراث الطبيعي البيئي والثقافي والإجتماعي المميز لهذه المناطق بما يساعد على تنميتها بشکل مستدام ويجعل منها منتزه سياحي يضمن بيئة نظيفة لأطول فترات ممکنة وأن الهدف الرئيسي من توفير هذا الدليل الارشادي هو تعزيز المستثمرين والمشغلين عند بداية اعداد هذه المشروعات لزيادة جودة المنتج السياحي المستدام .
<strong>وتعتمد منهجية الورقة البحثيه علي</strong>المنهج الاستقرائي من خلال مجموعة من القراءات الخاصة لاعداد عناصر وادوات تحقيق التنمية المستدامة للتوصل الى محددات تصميمية اولية ثم تطبيق هذه المحددات التصميمية الاولية من خلال مشروع ميداني شارک فيه الباحث في اعداد مشروع خطة التنمية السياحية المستدامة لمنطقة العلا السياحية التى تقع في شمال المدينة المنورة بحوالي 400 کم بالمملکة العربية السعودية ، لما لهذا الأقليم من موروث طبيعي صحراوي وتاريخي يمتد من جنوب البتراء في المملکة الأردنية الهاشمية ويشمل على مناطق صلبة وعرة ذات مناظر طبيعية خلابة وکذلک الطبيعة البرية والنباتية المتميزه في هذه المنطقة ، ومن ثم التوصل الى محددات واعتبارات تصميمية نهائية تکون بمثابة دليل ارشادي للمستثمرين والمطورين عند بداية اعداد مشروعاتهم السياحية في المناطق الصحراوية البيئية (Eco desert zones).
https://jaes.journals.ekb.eg/article_19263.html
https://jaes.journals.ekb.eg/article_19263_79d1e81b343eacc1abc8fdc0b0228675.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
التحديات التى تواجه تخطيط المدينة الالکترونية بالمدن العربية
298
308
EN
رانيا
بدوى
شکرى عبد الرحمن
التخطيط العمرانى والتصميم الحضرى بأکاديمية القاهرة الجديدة
10.21608/auej.2017.19264
Arab city is facing major challenges summed up in its ability to meet the accelerating global transformations produced by the information and communication revolution , which began to show new concepts Arab city never seen before, it is the information revolution to the digital age , globalization and e-commerce e-government and other concepts. Thus creating an atmosphere of challenge and competition between cities in the region and put it to the test in the face of the winds of change, either to elevate our cities to the challenge and take a privileged position on the modern cities of the world map, or remain in the pages of history sing its achievements and its long history. Can even cities now use information and communication technologies to modernize itself and unambiguous digital dress increases their competitiveness and give it a new dimension through the adoption of " electronic -government " projects , which means providing public services to citizens through modern electronic means.
This paper sheds light on a number of Arab and international cities in the field of electronic -government experience and focus on the most important features of the experiment and draw a number of lessons that can be utilized in other Arab cities projects. This is to review the e-government projects in Muscat, Oman City, and it appears clear that there are great similarities in the difficulties and obstacles faced by the three cities in the implementation of their projects. It also discusses the worksheet concept of e- municipalities, and its components, and handicaps and pillars of its success, and the elements of a shift in activities and municipal services.
What distinguishes these experiments is the leading Arab outstanding management approach that has been followed so are almost electronic in Arab cities -government projects administrative development projects rather than IT projects and contacts information. May be the most important Arab cities problems are management problem rather than a problem of poverty or lack of resources or otherwise , and e-government as a golden opportunity to overcome that provided that the new vision for managing to overcome all obstacles routine on the one hand and copes with the nature of the times and electronic products.
تواجه المدينة العربية تحديات کبيرة تتلخص في قدرتها على مواجهة التحولات العالمية المتسارعة التي انتجتها ثورة المعلومات والاتصالات، حيث بدأت تظهر مفاهيم جديدة لم تعهدها المدينة العربية من قبل، فمن الثورة المعلوماتية الى العصر الرقمي والعولمة والتجارة الإلکترونية فالحکومة الإلکترونية وغيرها من المفاهيم. مما خلق جوا من التحدي والتنافس بين مدن المنطقة ووضعتها على المحک في مواجهة رياح التغيير، فإما ان ترتقي مدننا لمستوى التحدي وتتخذ موقعا مميزا على خارطة المدن العالمية الحديثة، أو تبقى في صفحات التاريخ تتغنى بإنجازاتها وتاريخها العريق. وأصبح بامکان المدن الآن أن تستخدم تقنيات المعلومات والاتصالات لتحديث نفسها ولبس ثوب رقمي يزيد قدرتها التنافسية ويمنحها بعدا جديدا من خلال تبني مشاريع "الحکومة الإليکترونية" والتي تعنى بتقديم الخدمات العامة للمواطنين عبر الوسائل الالکترونية الحديثة.
تلقي هذه الورقة الضوء على عدد من تجارب المدن العربية والعالمية في مجال الحکومة الإلکترونية وترکز على أهم ملامح التجربة وتستخلص عددا من الدروس التي يمکن الاستفادة منها في مشاريع المدن العربية الأخرى. حيث تم استعراض مشاريع الحکومة الإلکترونية في مدينة دبي ومسقط وعمَان، ويظهر جليا أن هنالک تشابه کبير في الصعوبات والعقبات التي واجهت المدن الثلاث في تنفيذ مشاريعها. کما تناقش ورقة العمل مفهوم البلديات الإلکترونية، ومقوماتها، وعوائقها ورکائز نجاحها، وعناصر التحول في الأنشطة والخدمات البلدية.
إن ما يميز هذه التجارب العربية الرائدة هو النهج الإداري المتميز الذي تم اتباعه بحيث تکاد تکون مشاريع الحکومة الإلکترونية في المدن العربية مشاريع تطوير إداري اکثر منها مشاريع تقنية معلومات واتصالات. فربما تکون أهم مشکلات المدن العربية هي مشکلة الإدارة أکثر من کونها مشکلة فقر أو نقص موارد أو خلافه، والحکومة الإلکترونية بمثابة فرص ذهبية للتغلب على ذلک بشرط اتباع رؤية جديدة للإدارة تتغلب على کافة المعوقات الروتينية من جهة وتتواءم مع طبيعة العصر ومنتجاته الإلکترونية<strong>.</strong>
https://jaes.journals.ekb.eg/article_19264.html
https://jaes.journals.ekb.eg/article_19264_316687bf6e1b7c4ab89c1f814a4242a9.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
SOUNDSCAPE EXPERIENCE AND ITS IMPACT ON THE IMAGE OF ALEXANDRIA
121
129
EN
Yasser
Farghaly
Architecture & Urban Design, Arab Academy for Science, Technology and Maritime Transport, College of Engineering and Technology, Alexandria, Egypt
Fahd
Hemeida
Architecture & Urban Design, Arab Academy for Science, Technology and Maritime Transport, College of Engineering and Technology, Alexandria, Egypt
Amal
Mamdouh
Architecture & Urban Design, Arab Academy for Science, Technology and Maritime Transport, College of Engineering and Technology, Alexandria, Egypt
Amr
Atef
Architecture & Urban Design, Arab Academy for Science, Technology and Maritime Transport, College of Engineering and Technology, Alexandria, Egypt
10.21608/auej.2017.19265
Image of the city has recently been the object of several reflections, both theoretical and empirical, in a wide range of different areas of knowledge. One might say that a new upsurge of research, of a multidisciplinary orientation, on the modes of representation of the cities was started with Kevin Lynch science 1960. Thus, to the more conventional analysis provided by city planning, architecture and landscape science, as well as by urban marketing research, was added the contribution of the social sciences, from history to anthropology, from geography to sociology. At present, the ‘image of the city’ is essentially an object of transversal analysis, productively traversed by so many cross-fertilizing disciplinary perspectives. The purpose of this research is to consider a particular perspective on those images - the sound image of the cities - seeking to draw attention to the way in which the social sciences, most particularly sociology and geography, approach them and include them in the body of knowledge they produce in order to consider the analytical value of sonorities and their relationship with behaviors and urban social life and environments through doing some measurements of the existing situation of Alexandria and comparing it with the international standards.
Soundscape,Sonic Environment,Acoustic Environment
https://jaes.journals.ekb.eg/article_19265.html
https://jaes.journals.ekb.eg/article_19265_16998b5c245cd5b60f75d618acbaddde.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
ENVIROMENTAL APPROACH FOR FAÇADE CLADDING IN OFFICE BUILDINGS IN EGYPT
145
154
EN
Ahmed
Atef
Faggal
Department of architecture Faculty of Engineering Ain Shams University
Ashraf
Ali
Ibrahim Nessim
Department of architecture Faculty of Engineering Ain Shams University
Mai
Mahmoud
Abo Zeid
Department of architecture Faculty of Engineering Ain Shams University
10.21608/auej.2017.19266
In dealing with the building as a thermal system, the correct choice of its parts and their relationships can be composed utilizing a frameworks approach. This can be accomplished by coupling an improvement method into the thermal performance of building right on time in the outline procedure. This requires planning the building all around as a thermal system in appropriate structure for the different methodologies.
The goal of this paper to assess the potential of façade cladding to save energy by studying it’s thermal performance, summarizes the outcome of a simulation analysis to determine the inefficiency of envelope construction cladding in reducing energy consumption for office buildings in Egypt.
<strong> </strong>
تهدف هذه الورقة إلى معرفة التأثير الحراري لاختيار الکسوة الخارجية للمباني الإدارية في مصر من اجل تحسين أداء الطاقة في المباني الإدارية من خلال اختيار نوع الکسوة الخارجية الأفضل بيئيا ومقارنتها بمعيار ((ASHRAE کما تم استخدام برنامج المحاکاة ((Ecotect للتحقق من أحمال السنوية للتبريد (تمثل أداء لطاقة) و لتسجيل الأداء الحراري وتم إجراء هذا البحث لمعرفة مدى التأثير الحراري للکسوة الخارجية على أحمال التبريد السنوي وخلصت إلى ان أداء الطاقة يمکن تعزيزه باستخدام کسوات خارجية ذات تأثير حراري منخفض و استخدام فجوة هواء بين الکسوة و الحائط و استخدام عزل حراري.
Energy Crisis,Egypt,energy consumption,Building envelope,cladding,office buildings,Thermal Performance
https://jaes.journals.ekb.eg/article_19266.html
https://jaes.journals.ekb.eg/article_19266_3332caef87572f573c40a65ff40da394.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
دور تطبيقات النانو في تحقيق العمارة المستدامة
310
327
EN
محمد
سیف النصر
احمد
قسم الهندسة المعمارية - کلية الهندسة بالمطرية – جامعة حلوان
10.21608/auej.2017.19268
The Architect care about the materials and raw materials properties to achieve the design requirements, and the latest science that brought about a boom in this area is Nanotechnology which can improve the material properties , add a new property, or production of new material, which leads to a marked difference in the ways of thinking and architectural design, and the world move to achieve the principles of sustainability in architecture because it is one of the most sectors negatively on the environment but the results so far away from the hoped.<br /> The Research supposed possibility of using nanotechnology to improve the performance of buildings to achieve the principles of sustainability, and to reach to achieve this hypothesis The research is divided into two main parts: - <strong>Theoretical Study</strong>: Recognition at Nano-technology and its applications in various fields and its impact on architecture in terms of materials and devices used, and the study of sustainable architecture system and its evaluation systems and how to take advantage of this field by Nano materials and devices . <strong>Analytical Study:</strong> Studying of nanotechnology applications to achieve sustainability standards in architecture through examples of the global trend of sustainable projects, analysis and use of nanotechnology applications and what are the expected success rates, and then conclude to the results and recommendations<br /> يهتم المعماري بخصائص المواد والخامات لتحقيق المتطلبات التصميميه لانها من أکثر العناصر التي تؤثر علي کفاءة المنشأ، ومن أحدث العلوم التي احدثت طفرة في هذا المجال هي تکنولوجيا النانو والتي عن طريقها يمکن تحسين خصائص المادة أوإضافة خاصية جديدة أو إنتاج مادة جديدة ، والتي تؤدي الي إختلاف ملحوظ في أساليب التفکير والتصميم المعماري ، ولقد إتجه العالم إلي تحقيق مبادئ إلاستدامة في العمارة لانها من اکثر القطاعات سلبا علي البيئة ولکن النتائج حتي الان بعيدة عن المأمول ،<br /> يفترض البحث إمکانية إستخدام تکنولوجيا النانو في تحسين أداء المباني لتحقيق مبادئ إلاستدامه ، وللوصول لتحقيق هذه الفرضية ينقسم البحث إلي جزئين رئيسيين :-<br /> اولا:- الدراسة النظرية : يتم فيها التعرف علي تکنولوجيا النانو وتطبيقاتها في المجالات المختلفة وإنعکاس ذلک علي العمارة من حيث المواد والآجهزة المستخدمة ، ثم دراسة منظومة العمارة المستدامه ونظم تقييمها وکيفية إلاستفادة من مواد وأجهزة النانو في تحقيقها .<br /> ثانيا:- الدراسة التحليلية : يتم دراسة تطبيقات النانو في البناء لتحقيق معايير إلاستدامة من خلال تحليل أمثلة لبعض المشروعات العالمية ذات التوجه المستدام وتستخدم تطبيقات النانو وما هي نسبة النجاح المتوقعة ، ثم نخلص الي النتائج والتوصيات .
https://jaes.journals.ekb.eg/article_19268.html
https://jaes.journals.ekb.eg/article_19268_b5e6babc3d1606e136e270a7dfbdc219.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
نحو مدن ذکية ذات کفاءة وظيفية دراسة تطبيقية علي مشروع مدينة المستقبل بالعاصمة التشيکية براغ
395
412
EN
الجندي
شاکر
الجندي
قسم العمارة، کليـة الهندسة ، جامعـة الأزهـر
10.21608/auej.2017.19269
Recent years have witnessed problems in the field of energy, and quality of life. in scope of technical progress and continuous increase in population here is come the need to create smart cities, by develop the existing cities to become smart cities, or build new cities that established from the beginning using sophisticated technological systems. The study cover smart cities from many aspects, the researcher address some important topics in smart cities, also point to some applications that could be implemented in the existing cities to develop services for people and enhance the quality of life and to provide a sustainable digital environment that become friendly to environment and encourage for learning and creativity to achieve happiness and welfare.
The study explains some basic standard criteria for smart city, we apply these standard criteria on the <strong>Future</strong><strong> City</strong> (which the researcher was one of its design team and make main role in the final design) to see how much this city achieve these standard criteria and list these results in the end of the research. The researcher follows in this research the inductive, analytical and practical approach to learn about the role of smart cities in achieving progress and welfare of the citizens.
<strong> </strong>
Smart cities,Sustainability,functional efficiently,Quality of life. المدن الذکية، الإستدامة، الکفاءة الوظيفية، جودة الحياة
https://jaes.journals.ekb.eg/article_19269.html
https://jaes.journals.ekb.eg/article_19269_8493a68647973ea7eef8b1a050b899fa.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
أحياء مفردات العمارة التراثية کأحد اتجاهات الإبداع التکنولوجى فى عمارة القرن الحادى والعشرين نحو عمارة معاصرة متوافقة مع البيئة
429
439
EN
أحمد
حنفى
محمود أحمد
معهد القاهرة العالى للهندسة وعلوم الحاسب والإدارة
الشيماء
حسین
محمد حسن
معهد القاهرة العالى للهندسة وعلوم الحاسب والإدارة
10.21608/auej.2017.19270
The creative thinking has linked to heritage architecture for a long period of time as in the spirit of the place and time as an effect on our thought and production, architectural heritage vocabulary and characteristics reflect the local identity and a chef the needs of the individual and our society, and is a reflection of the Arab and Muslim world reality, with technological developments and the emergence of digital architecture we must accept this development.
Many previous studies have taken the inspiration and quotation of heritage architecture and its elements and forms, without search in content and physical and moral, constituting the search new addition in the recruitment of the values and the terms of the heritage architecture and its different applications. Hence the research aims to find the mechanisms of integration between the heritage, local architecture and digital architecture with its different trends to produce an architecture appropriated with the surrounding environment, and its role in enhancing the values of local architecture takes into account the realism and the potential of the times, and the culture of contemporary societies .
طالما ارتبط الفکر الإبداعي فى العمارة التراثية بروح المکان ، ومعطيات الزمان المتجددة التى يتفـــاعل معها المعماري کمؤثرات على تصميمه وفکره وإنتاجه المعمارى ،والعمارة التراثية بمفرداتها وخصائصها المعمارية تعبر عن هويتنا المحلية وتلبي احتياجات الفرد والمجتمع ، وتمثل انعکاس لواقعنا العربى والإسلامي، ومع التطورات التکنولوجية وظهور العمارة الرقمية باتجاهاتها وتطبيقاتها المختلفة فإننا لا نستطيع ألا إن نواکب هذه التطورات.
ولقد اهتمت العديد من الدراسات السابقة بالاستلهام و الاقتباس من العمارة التراثية بعناصرها المعمارية وأشکالها، دون البحث في مضمونها و قيمتها المادية والمعنوية، ليشکل البحث إضافة جديدة في مجال توظيف قيم ومفردات العمارة التراثية فى ظل الإبداع التکنولوجى الحالى.
ومن هنا يهدف البحث لإيجاد السبل وآليات الدمج بين العمارة التراثية والمحلية والعمارة الرقمية باتجاهاتها المختلفة وذلک لإنتاج عمارة تتوافق مع البيئة المحيطة، بطريقة تراعى الواقعية وإمکانات العصر، و ثقافة المجتمعات المعاصرة، کما يهدف البحث لدراسة دور التکنولوجيا الرقمية في تأصيل قيم العمارة المحلية والتراثية ، لإيجاد عمارة متوافقة بيئياً.
(الثورة الرقمية)Digital Revolution,(الواقع الافتراضي) Virtual Reality,العمارة المحلية Vernacular Architecture,Eco -Vernacular Architecture العمارة المحلية الرقمية المتوائمة مع البيئة
https://jaes.journals.ekb.eg/article_19270.html
https://jaes.journals.ekb.eg/article_19270_0cd6a61752826e708b631d607451eee8.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
المسارات التراثية السياحية کأداة لتحقيق التنمية المستدامة للمدن
377
394
EN
محمد
محمد
شوقي أبوليله
کلية الهندسة - جامعة المنصورة – جمهورية مصر العربية
مهند
علی
فوده
کلية الهندسة - جامعة المنصورة – جمهورية مصر العربية
10.21608/auej.2017.19272
کان لتداعيات سقوط الطائرة الروسية في شرم الشيخ في 31 اکتوبر 2015 اثرا سلبيا کبيرا على قطاع السياحة المصرية بشکل عام وعلي المردود الاقتصادي والدخل القومي لمصر بشکل خاص بعد تدني أعداد السائحين القادمين لمصر بشکل کبير عقب الحادث.
أظهرت الاثار السلبية للحادث والتي امتدت بما يربو عن العام, قصورا في ادارة مورد السياحة في مصر, حيث تعتمد الدولة بشکل کبير على المقاصد السياحية الکبرى لجذب السائحين في مدن القاهرة, وشرم الشيخ, والغردقة, والاقصر وأسوان, وتتجاهل الترويج للموارد الثقافية والتراثية المتنوعة التي تتمتع بها مدن مصر المختلفة والتي من الممکن ان تکون جاذبة لأنواع مختلفة من السياحة قد تحقق التنمية لمختلف القطاعات داخل تلک المدن.
وتهدف الورقة البحثية إلى إرساء أسس علمية واستخلاص آليات يتم علي أساسها تحقيق تنمية مستدامة للمدن المصرية ذات المقومات التراثية في ظل ظروف تعاني منها المدن المصرية السياحية بشکل عام والمدن التراثية بشکل خاص وکذلک فتح آفاق جديدة للسياحة المصرية من خلال تراثها القومي من خلال عمل مسارات تراثية سياحية تشمل يوما أو عدة أيام تحقق مردودا اقتصاديا علي کافة القطاعات داخل تلک المدن، من خلال تطبيق هذه الدراسة علي أحدي المدن المصرية ذات التراث الحضاري والإنساني الکبير في مدن الدلتا وهي مدينة المنصورة والتي نتجت خلال حقبات مختلفة وتفاعل ثقافي بين الجاليات الاوروبية التي کانت تقطن المدينة والتي ترکت مردودا تراثيا حضاريا وعمرانيا ومعماريا مازالت اثاره باقية حتى الان، حيث يعد هذا التراث الحضاري والعمراني والمعماري بما يحتويه من بيئات تراثية وثقافية واجتماعية واقتصادية ذات قيمة يجب الحفاظ عليها واستثمارها.
ويطرح البحث عدة أسئلة بحثية أهمها "هل من الممکن تحقيق تنمية مستدامة لتلک المدن بخلق مسارات تراثية وحضارية سياحية تشمل مناحي عدة بما يحق فائدة للمجتمعات المعنية؟ ، وهل من الممکن استنساخ التجارب الإقليمية في مجال المسارات التراثية عند وضع أسس علمية لذلک ؟" .
وتحقيقا لأهداف البحث يستعرض البحث من خلال المنهجية البحثية، والتي تعتمد علي عدة مناهج کالإستقرائى والوصفي والتحليلى، ومن خلال الشق النظري في البحث سيتم استعراض المسارات السياحية، مفهومها، أهميتها وأهمية الربط بين المسارات المختلفة، ثم تثبيت المفاهيم حول السياحة وأهميتها من خلال التعريف بالسياحة وبالسائح، أنماط السياحة، مکونات السياحة، تأثيراتها المختلفة، ثم دراسة العلاقة بين السياحة والاستدامة في ظل التنمية المستدامة، مفهوم السياحة المستدامة، وصولا لتعريف السياحة التراثية، وآثارها المختلفة، ثم السياحة التراثية المستدامة، ثم ينتقل البحث لتحليل التجارب العربية للمسارات التراثية متمثلة في مسارات دمشق بسوريا، ومسار السلط التراثي بالأردن، ثم مسارات مکة المکرمة بالمملکة العربية السعودية، وصولا إلي الدراسة التطبيقية وتنفيذ المسارات التراثية لمدينة المنصورة، وصولا للنتائج البحثية، والتوصيات.
المسارات التراثية السياحية,التنمية المستدامة,مدينة المنصورة
https://jaes.journals.ekb.eg/article_19272.html
https://jaes.journals.ekb.eg/article_19272_c59def84239f8a33f66850029d4674ed.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
الاستدامــــة في مجال الإنشاء والبناء (دراسة حالة: أنظمة تقييم المباني المستدامة)
413
428
EN
حماده
محمد
عبد العظيم الشيخ
قسم العمارة -کلية الهندسة -جامعة الأزهر
محمد
عبد الرؤوف
ابوالفتوح
قسم العمارة -کلية الهندسة -جامعة الأزهر
اسلام
احمد
أبوضيف علي
قسم العمارة -کلية الهندسة -جامعة الأزهر
10.21608/auej.2017.19273
Many countries have introduced the concept of sustainable development and headed towards green buildings to promote sustainability in the building and construction sectors. Sustainable buildings or green buildings or Ecological design means to build homes, offices, or other structures in a way to reduce the Ecological Footprints. It looks at sustainability at the present time as the delicate balance between economic, environmental and social health of the community and the nation, and thus of the land. Sustainability rating systems was developed to measure the level of sustainability and green building practices and to provide the best experience at the highest level of certified systems. Sustainable buildings will design, build and operate by certified standards of guidelines and checklists.
Rating systems specially designed to suit a specific country or region and will not be applicable in another country or region, and therefore must develop evaluation systems in accordance with the local and environment needs to be more accurate in measurement.
Sustainable building rating systems in Egypt applied to climate-related issues, the use of non-effective energy, the weakness of natural resources and waste liquid, gas and solid agricultural management, as well as drainage and irrigation water waste, which have a negative and dangerous effect for the environment and all sectors of the state, and the quality of the indoor environment, This requires the development of an Egyptian national system for rating green buildings to ensure the achievement of the development goals we have: to meet the current generation's needs without compromising the needs of future generations, to reduce energy consumption and reduce costs in the construction sector.
أدخلت العديد من البلدان مفهوم التنمية المستدامة واتجهت نحو المباني الخضراء لتعزيز الاستدامة في قطاعات التشييد والبناء. المباني المستدامة أو المباني الخضراء أو التصميم البيئي تعني بناء المنازل والمکاتب، أو غيرها من الهياکل في وسيلة لتقليل بصماتها البيئية. وينظر إلى الاستدامة في الوقت الحاضر بالتوازن الدقيق بين الصحة الاقتصادية والبيئية والاجتماعية للمجتمع والأمة وبالتالي للأرض. تم تطوير أنظمة تقييم الاستدامة لقياس مستوى استدامة المباني الخضراء وتقديم أفضل ممارسات الخبرة في أعلى مستوى معتمد للأنظمة، وسيتم تصميم وبناء وتشغيل المباني المستدامة من خلال معايير معتمدة من المبادئ التوجيهية وقوائم المراجعة.
انظمة التصنيف مصممة خصيصا لتلائم بلد أو منطقة معينة ولن تکون قابلة للتطبيق في بلد أو منطقة أخري، ولذلک يجب تطوير انظمة التقييم بناء على الاحتياجات المحلية والبيئة لکي تکون أکثر دقة في القياس.
يأتي تطبيق أنظمة تقييم المباني المستدامة في مصر من أجل القضايا المتصلة بالمناخ، والاستخدام الغير الفعال للطاقة، وضعف إدارة الموارد الطبيعية والنفايات السائلة والغازية والصلبة والزراعية، وکذلک مخلفات مياه الصرف الصحي والري، والتي يکون لها تأثير سلبي وخطير على البيئة وجميع قطاعات الدولة، وجودة البيئة في الأماکن المغلقة، ويستلزم هذا تطوير نظام مصري وطني لتصنيف المباني الخضراء لضمان تحقيق أهداف التنمية لدينا: لتلبية احتياجات الجيل الحالي دون المساس باحتياجات الأجيال القادمة، وللحد من استهلاک الطاقة وتقليل التکاليف في قطاع البناء والتشييد.
الاستدامة- المباني المستدامة,المباني الخضراء-التقييم البيئي- أنظمة التقييم
https://jaes.journals.ekb.eg/article_19273.html
https://jaes.journals.ekb.eg/article_19273_d28e3611260b8acc1dae1728a0e6a6ac.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
النطاقـَـات العُمرانيــة کمَدخل للتعامل مع المناطق التراثيـة
280
296
EN
هاني
سعد
سالم أحمد
قسم الهندسة المعمارية – کلية الهندسة– جامعة الأزهر– مدينة نصر – القاهرة – جمهورية مصر العربية
10.21608/auej.2017.19275
Urban areas properties generally differ in their conditions and needs. The heritage areas particularly differ as they contain distinguished traditional buildings that are of aesthetical, historical and functional values. Each heritage area has its own problems, and conservation requirements differ accordingly. Thus, the problems of each area have to be identified precisely, in order to determine the suitable approach to address this problem, as each problem has a different approach. Based on this, the heritage areas should be classified accurately according to their urban regions. Problems and proper solutions of each region should be identified to ultimately maintain the heritage area using different methods. This could be achieved by developing a proposed methodology that deal with each heritage area through its different urban regions in a certain direction and optimum method, or by a combined group of proper methods and approaches that aim to preserve the entire heritage region for a long period of time.
تختلف طبيعة المناطق العمرانية عن بعضها فى ظروفها واحتياجاتها عامة والمناطق التراثية وما تحتويه من مبانى تراثية متميزة لها قيمتها الفنية والتاريخية والوظيفية خاصة ، حيث تختلف کل منطقة تراثية عن الأخرى فى نوعية المشکلات التى تواجهها کما أن متطلبات الحفاظ عليها تختلف باختلاف نوعية هذه المشکلات ، يتطلب ذلک تحديد مشکلات کل منطقة بدقة الأمر الذى من خلاله يتم تحديد مدخل التعامل مع هذه المشکلة فإن لکل منها أسلوب فى التعامل يختلف عن الآخر ، يستدعى ذلک أن نقوم بالتصنيف الدقيق للمنطقة التراثية حسب نطاقاتها العمرانية المُختلفة والمُکونة لها والتعرف على مشاکل کل نطاق والحلول المناسبة له وصولاً إلى الحفاظ على المنطقة التراثية بأکثر من إتجاه وأسلوب ، يتم ذلک من خلال تحديد منهجية مُقترحة للتعامل مع المنطقة التراثية الواحدة من خلال نطاقاتها العمرانية المختلفة باتجاه معين وأسلوب أمثل أو بمجموعة مُرکبة من الإتجاهات والأساليب المُناسبة لها بهدف الحفاظ على المنطقة التراثية ککل لفترات بعيدة المدى .
https://jaes.journals.ekb.eg/article_19275.html
https://jaes.journals.ekb.eg/article_19275_0241e2598d31bd56334cf4f93d61b5de.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
المجاورات السکنية
346
357
EN
عمرو
الحلفاوي
قسم الهندسة المعمارية - کلية الهندسة – جامعة القاهرة
ولاء
أحمد
نور
قسم الهندسة المعمارية - کلية الهندسة – جامعة القاهرة
مهاد
سید
إبراهيم حسن عمارة
الأکاديمية الحديثة للهندسة والتکنولوجيا بالمعادي
10.21608/auej.2017.19276
Sustainability Has Become In Recent Studies And Research The Most Important Element And The Central Part That Has To Be Taken Into Account In The Field Of Urban Design And Planning Of Cities, So Research Aims To Reveal The Concept Of Social Sustainability In Modern Urban Communities, And The Extrapolation Of Criteria And Mechanisms To Achieve The Aim Of Improving The Neighborhood In Line With The Needs Of The User.
أصبحت الاستدامة في الدراسات والبحوث الحديثة العنصر الأهم والجزء المرکزي الذي يجب أن يؤخذ بالاعتبار في مجال التصميم والتخطيط الحضري للمدن، في حين نجد قصورا في التغطية المعرفية لأهمية المنظومة الاجتماعية للاستدامة في البيئة الحضرية والمجتمعات العمرانية وآليات ومعايير تحقيقها .
حيث يعتبر البعض " <strong>الاستدامة</strong><strong>الاجتماعية</strong>" شرط مسبق للتنمية المستدامة، و هذا يعني بأن الموارد الطبيعية المستعملة داخل المحيط الاجتماعي الذي قرر توزيع هذه الموارد بشکل مستدام أو غير مستدام )ضمن الجيل الحالي، وبين الأجيال المستقبلية والحالية( والعدالة فى استخدام الموارد.
وبالتالي اتسع النطاق العمراني للعديد من المدن العربية خلال العقود القليلة الماضية، واتسعت معه المناطق السکنية نظرا لتزايد الکثافة السکانية ، مما أدى إلى انتشار الحاجة إلى توفير مباني وتجمعات سکنية دون مراعاة لمتطلبات الإنسان الاجتماعية في تصميم الفراغات الخارجية المحيطة بها، وقد ساعد ذلک في فقدان العلاقات الاجتماعية بين السکان.
لذا يهدف البحث إلى الکشف عن مقومات الجانب المادي للاستدامة الاجتماعية في المجتمعات العمرانية الحديثة ، واستقراء معايير وآليات تحقيقها بهدف الارتقاء بالمجاورة السکنية بما يتوافق مع احتياجات المستخدم ، وبالتالي سيتم إلقاء الضوء على المجاورات السکنية في المجتمعات العمرانية الجديدة ، وذلک من خلال تحليل أحد محاور التنمية المستدامة وهو المحور الاجتماعي.
الاستدامة – الاستدامة الاجتماعية- نظرية المجاورة السکنية
https://jaes.journals.ekb.eg/article_19276.html
https://jaes.journals.ekb.eg/article_19276_cb9d2a72fe1d2223da11af3456accec6.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
دراسة تأثر شرکاء العمل المعماري بدوافع تحقيق الاستدامة کمدخل لوضع معايير محلية لتقييم المباني وفقاً لنظم الاستدامة دراسة حالة "مشروع الخدمات البلدية بقطر"
328
345
EN
محمد
یوسف
فهمي عبدالموجود
قسم العمارة - کلية الهندسة بقنا ـ جامعة الأزهر
محمد
محمد
عبد الحميد
قسم العمارة ـ کلية الهندسة بالقاهرة ـ جامعة الأزهر
10.21608/auej.2017.19278
Currently, the efforts of countries have been headed towards Sustainability Development for fear of the negative effects of the irresponsible use environmentally of resources and capabilities, hoping to achieve better growth rates economically, socially and environmentally which guarantees a high standard of living at the level of present and future generations, a sustainable building is connected closely with all sections of sustainable development, starting from human resources sustainability represented in users of Architectural work passing through the sustainability of natural resources, in addition to an economical sustainability, and the problem of achieving that architect and its expansion towards an obvious understanding in the relationship of the partners of architect product with motivations of sustainability achievement and their influence by it, on which an architect ought to construct his ideology and Weaves around it his justifications in order that it will be a method for him where he could achieve all partners' interest in a form of architect works upgrading society and maintaining its environmental capabilities .
Motivations to achieve goals are formed by necessities, desires and values, concerning necessities , they are mandatory, they are often in a form of general laws or private conditions from the State or the development bodies that obligates architect work partners to work inside the sustainable framework during the age of project, whereas the desires, they are motivational, they may be in the form of legislations and laws of conditional, or they are in a form of feasibility study in which a consultant motivates a client so as to achieve profits and financial gains in case the project sustainability criteria have been adopted, while the values, they are optional no approach to them except with cultural awareness, that is poured in the circle of commitments and liabilities of religious institutions, Media, Education and the role of NGOs. and civil society organizations, and to work on all these motivations in order to achieve the goals of sustainable architect, it is necessary to realize the fact of relationships among the architect Product partners as well as the dimensions of the mentioned sustainability achievement, it is well-known that such relationships have changed in their interests and altered in their priorities from a project to another, based on the type of project, its location, the objective of its establishment ,its Financial allocations as well as client's culture , his thinking pattern, his relationship with the project use, and that all agrees with the legislations, laws and conditions applicable in temporal and spatial boundaries of the project site . The research has tried to address the fact of these relationships so as to reach a scientific approach through which it is possible to draw a proposal assisting an architect through the design process in applying the sustainable architect systems in a design within a framework that guarantees an interest for all partners of an architect work.
تتجه جهود الدول حالياً نحو التنمية المستدامة خوفاً من الآثار السلبية للاستعمالات غير المسئولة بيئياً للموارد والإمکانيات، وطمعاً في تحقيق معدلات نمو أفضل اقتصادياً واجتماعياً وبيئياً، مما يضمن مستوى معيشي راقٍ لشعوبها على مستوى الأجيال الحاضرة والمستقبلية، وترتبط العمارة المستدامة بجميع فروع التنمية المستدامة ارتباطاً وثيقاً بداية من استدامة الموارد البشرية متمثلة في مستعملي العمل المعماري مروراً باستدامة الموارد الطبيعية بالإضافة إلى الاستدامة الاقتصادية، وتعود الإشکالية في تحقيق تلک العمارة وانتشارها إلى الفهم الواضح في علاقة شرکاء المنتج المعماري بدوافع تحقيق الاستدامة وتأثرهم بها، والتي من المفترض أن يبني عليها المعماري أيدولوجياته وينسج حولها مبرراته فتکون له منهاجاً يستطيع من خلاله تحقيق مصلحة الشرکاء جميعاً في صورة أعمال معمارية ترتقي بالمجتمع وتحافظ على المقدرات البيئية.
وتتشکل دوافع تحقيق الأهداف من ضرورات ورغبات وقيم، فأما <strong>الضرورات</strong> فهي إلزامية وغالباً ما تکون في صورة قوانين عامة أو اشتراطات خاصة من الدولة أو جهات التطوير تلزم شرکاء العمل المعماري بالعمل داخل الإطار المستدام خلال عمر المشروع، وأما <strong>الرغبات</strong> فتکون عامل مساعد على التحفيز وقد تأتي أيضاً في صورة تشريعات وقوانين مشروطة أو تکون في هيئة دراسات جدوى اقتصادية يحفز الاستشاري بها العميل لتحقيق أرباح ومکاسب مادية إذا ما تم تبني معايير الاستدامة بالمشروع، وأما <strong>القيم</strong> فهي اختيارية لا سبيل لها إلا بالوعي الثقافي ويصب ذلک في دائرة التزامات ومسؤوليات المؤسسات الدينية، الإعلام، التعليم ودور الجمعيات الأهلية ومنظمات المجتمع المدني. وللعمل على کل تلک الدوافع من أجل تحقيق أهداف العمارة المستدامة فلابد من إدراک حقيقة العلاقات بين شرکاء المنتج المعماري وأبعاد تحقيق الاستدامة السالفة، ومن المعلوم أن تلک العلاقات تتغير اهتماماتها وتتبدل أولوياتها من مشروع لآخر، وذلک تبعاً لنوع المشروع وموقعه والهدف من إنشاؤه ومخصصاته المالية علاوة على ثقافة العميل ونمط تفکيره وعلاقته باستعمال المشروع ويوافق ذلک کله التشريعات والقوانين والاشتراطات المعمول بها في الحدود المکانية والزمانية لموقع المشروع. ويحاول البحث الوقوف على حقيقة تلک العلاقات للوصول إلى مدخل علمي يمکن من خلاله وضع مقترح يساعد المعماري خلال العملية التصميمة في تطبيق نظم العمارة المستدامة بالتصميم في إطار يضمن تحقيق المنفعة لجميع شرکاء العمل المعماري.
https://jaes.journals.ekb.eg/article_19278.html
https://jaes.journals.ekb.eg/article_19278_093fd17fea97b44d8a3ebe09c0e48af1.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
SHEAR BEHAVIOR OF TRAPEZOIDAL BEAMS
37
53
EN
Ayman
Hussein
Khalil
Ain Shams University, Cairo, Egypt
Mohamed
Nabil
Ain Shams University, Cairo, Egypt
Moukhtar
Mohamed
Structural Engineer , Cairo, Egypt
10.21608/auej.2017.19280
Extensive research has been carried out on the behavior and shear strength of reinforced concrete beams. The available literature is voluminous and the state of the art review is given elsewhere. Numerous tests on beams have been conducted and reported in the literature. Many theories for predicting the shear strength have been advanced.
The shear strength is based on an average shear stress on full effective cross section (b*d), where b = section width and d = section depth.
For calculating shear resistance for Trapezoidal beams with variable width there is many methods and provisions in different codes to calculate the effective width of the section as shown below:
-E C: minimum Web width.
-ACI 318: average web width.
-AASHTO: the minimum of average width and 1.2 min width.
-LRFD: Minimum web width.
-BS 8110: average web width.
Results obtained by experimental work indicated that the shear behavior of the trapezoidal beams depend on the average width of the section.
Shear behavior,trapezoidal beams and variable width
https://jaes.journals.ekb.eg/article_19280.html
https://jaes.journals.ekb.eg/article_19280_b28b5cbe4adab287a0ab67793e6a879b.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
A SURVEY OF PROJECT MANAGEMENT MATURITY FOR CONSTRUCTION CONTRACTORS IN EGYPT: THE CURRENT STATUS
1
13
EN
Mohamed
H
Moutawei
Orascom Construction Industries, Cairo, Egypt.
Ahmed
S
Mohamed
Construction Engineering & Management, Structural Engineering Department, Faculty of Engineering, Cairo University.
Moheeb
E
Ibrahim
Director of Strategic Management Department, Social Fund for Development, Egypt.
Mohamed
A
Bakry
3Director of Strategic Management Department, Social Fund for Development, Egypt.
10.21608/auej.2017.19281
Project Management is considered now one of the most dynamic and growing professions worldwide. Effective project management not only reduces unnecessary costs of doing business, but also has become as a crucial factor to gain a competitive advantage and determines the success and survive of organizations. In the last decade, there is a global international interest and attention for organizations to evaluate and improve the effectiveness of its project management practices. Given such background, this clarifies the dramatic increase in the attention, research and practices of the project management maturity and the maturity models. Maturity Models has taken on greater significance not only in assessing organization’s current project management capabilities and efficiency, but also as a path for achieving excellence in project management and further performance improvement. The capability maturity model, the first maturity model developed, has achieved a wide success and Organizations implementing this approach experience and report significant benefits and return on investment. Various models have since been developed and proposed, and they are most commonly implemented in developed countries such as USA, UK, Canada, Europe, etc. The excessive variety of maturity models has made the choice between them difficult and need careful attention and consideration in both the model choice and implementation in the business. In Egypt, there is a lack of documentation available on the current status, awareness and utilization of maturity models in the contracting organizations working in the construction sector and this study aims to fill this gap. To achieve this, it was necessary to consult project management experts and professionals to get an understanding of how these organizations view maturity models and project management standards and to establish the most common business practices and so propose the basis of a maturity model for Egyptian construction contractors that best fits the current status.
Based on the analysis of the survey conducted, it was concluded that project management tools and methodologies have not yet been utilized effectively in the Egyptian construction contracting organizations and that there is much room for improvement regarding project management practices in these organizations in order for Egypt to develop the contracting construction sector as a pillar for the Egyptian economy.
Construction Industry,Egypt,Project Management
https://jaes.journals.ekb.eg/article_19281.html
https://jaes.journals.ekb.eg/article_19281_0445d97f40c5634e9836394dafaec395.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
INVESTIGATING SCOUR DEPTH AROUND BRIDGE PIERS IN CURVED CHANNELS
55
67
EN
Anas
M
Elmolla
Irrigation and Hydraulics, Faculty of Engineering, Al-Azhar University, Egypt
Walid
Alsayed
Irrigation and Hydraulics, Faculty of Engineering, Al-Azhar University, Egypt
Amir
mobasher
Irrigation and Hydraulics, Faculty of Engineering, Al-Azhar University, Egypt
Ahmed
Helmy
Irrigation and Hydraulics, Faculty of Engineering, Al-Azhar University, Egypt
10.21608/auej.2017.19283
Local scour around bridge piers is one of the most common causes of bridge failures .Many researchers studied the scour around the piers of bridges in straight channels. However, there is little information about the scour at bridge pier in a curved channel. In this paper, scouring is studied in curved channel at 30 degrees. Various piers forms were investigated to study local scour in the middle of the channel. The experimental study was conducted in a glass-walled8 m long rectangular flume (i.e. 30 cm x 60 cm). It encompasses three parts (i.e. the first and last part are 3 m long, 60 cm wide and 30 cm high, the third part, at its middle, is curved with angle 30 degrees on the horizontal, 2 m length. The experimental program was designed to test relative distance (b / B = 0.5) under 5 discharges (i.e. 13.89, 19.41, 23.77, 28.04 and 30.64 l/sec). An ultrasonic device was used to measure the water levels and depths as well as the scour length so as the depth. This is achieved to investigate the pier type and shape efficiency in reducing the scour depth. It was found that the best performance was achieved in the case, where the substrate was placed in the middle of the waterway and the inclination angle was equal to zero, where the hexagonal reduced the scour depth by 34%,relative to the maximum depth of scour.
تعتبر عملية النحر حول رکائز الکباري في المجاري المائية من أکثر المشاکل التي تؤثر علي سلامة وأمان الکباري ويحدث النحر في قاع المجري المائي حول دعامات الکباري لأسباب کثيرة من أهمها تجاوز سرعة مرور التيار المائي حولها ووصولها للسرعات الحرجة التي تتحملها جزيئات مادة القاع وذلک نتيجة لاعتراضها بدعامات الکباري وقد تمت الکثير من الدارسات لدارسة النحر حول الرکائز في مجاري المياه المستقيمة.
في هذا البحث سيتم دراسة النحر حول الرکائز في القنوات المنحنية ومدي إمکانية تنفيذ رکائز في هذه المناطق وقدرة وکفاءة أشکال الرکائز في تقليل طول النحر حول هذه الرکائز. وقد تم اقتراح و استخدام أربع رکائز مختلفة الشکل والمقدمة ( بيضاوي الشکل –مضلع (مسدس الشکل)- مستطيل ذو مقدمة نصف دائرة - مستطيل ذو مقدمة عدسيه ). وقد تم دراسة تأثير اختلاف شکل الرکيزة وکذلک شکل المقدمة علي طول النحر حول الرکيزة. وقد أجريت دراسة نظريه باستخدام أسلوب التحليل العددي لإيجاد علاقة تربط بين الخصائص الأساسية والمتغيرات التي تؤثر علي تلک الخصائص وإيجاد علاقات نستطيع من خلالها تحليل تأثير تلک المتغيرات علي الخصائص الاساسيه .وأجريت دراسات معملية مکثفة علي قناة مستطيلة بقطاع (60سم *30 سم ) وطول 8م تنقسم إلي ثلاثة أجزاء الجزأين الأول والأخير مستقيمان وبطول 3م لکل جزء والجزء الأوسط منحني ويميل بزاوية 30 درجة والقناة ذات جوانب شفافة وقد تم استخدام جهاز الموجات فوق ألصوتية لقياس أعماق النحر في قاع ألقناة حول الرکيزة وقد تم وضع نمازج الرکائز في منتصف الجزء المنحني الذي يميل بزاوية 15درجة علي الجزء المستقيم وکذلک في منتصف عرض القناة .
وتم تم دراسة کفاءة نوع وشکل نمازج الرکائز علي التقليل من طول النحر حول النماذج وقد خلص البحث إلي أن أفضل شکل لتقيل طول النحر في حالة وضع الرکيزة في منتصف المجري وبزاوية ميل علي المماس تساوي صفر کانت ذات الشکل المضلع(السداسي) وبنسبه تقل 17% عن أقصي طول نحر.
https://jaes.journals.ekb.eg/article_19283.html
https://jaes.journals.ekb.eg/article_19283_6e8d432fd9e323637dd3de8f8815074e.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
COSTING THE HEALTH AND SAFETY IN THE EGYPTIAN BUILDING CONSTRUCTION PROJECTS
167
174
EN
Mohamed
Magdy
Giessa
The Arab Contractors, Osman Ahmed Osman & Co
Ibrahim
Abdul Rashid
Department of Construction and Building Engineering, Faculty of Engineering, Ain Shams University , and Department of Construction and Building Engineering, College of Engineering and Technology
Sameh
Abu El-Soud
Arab Academy for Science and Technology and Maritime Transport, Cairo- Egypt
Abdel Hamid
El-Tahan
Arab Academy for Science and Technology and Maritime Transport, Cairo- Egypt
10.21608/auej.2017.19284
This study described the steps followed in developing an integrated model designed to estimate the cost of health and safety during construction of residential projects in Egypt. The intention of developing this model was to help owners, investors, and engineers to generate an idea about the desired safety budget needed to complete the proposed project before the actual start of the construction and during the bidding stage. This paper represents three case studies in which the health and safety costs for the construction project came to approximately 1.22% of the total cost of the budget. Although the size of the sample was not large, the results were supportive of the other studies, and indicated that the findings, in general, can be applied to a variety of project settings. The model can provide users with the option to modify the cost of any elements needed in health and safety from the detailed list that was entered in the model; and to implement all necessary adjustments in an easy and efficient way, by changing the elements values associated with the health and safety. On the other hand, this model was designed to be easy to use and flexible and it executes necessary calculations in a quick and accurate way.
تعد الحوادث و الإصابات في مواقع الإنشاء من المشکلات الرئيسية على الصعيد المحلى والعالمي، ومن المعروف أن تفاصيل خطة السلامة والأمن الصناعي لا تکتب بالتفاصيل والوضوح الکافي في عقود المشاريع أو المواصفات القياسية الحکومية أو في أي مکان آخر مقارنة بالتفاصيل والوضوح الذي تکتب به بنود الأعمال في مقايسة الأعمال الخاصة بالمشاريع کما يتم التنويه عن خطة السلامة ومسئولية سلامة العاملين وسلامة المعدات بصورة عامة في التعاقدات الخاصة بالمشاريع الإنشائية وبدون ذکر أية تفاصيل أخرى سوي أن المقاول هو المسئول عن سلامة جميع العاملين بالموقع.
کان الهدف من هذا البحث هو محاولة تقديم نهج جديد يمکن أن يقيس و يحدد تکلفة تطبيق تعليمات السلامة و الأمن الصناعي في مشاريع الإسکان بمصر.
لم تصمم هذه الرسالة لتبتکر خططا استراتيجية جديدة أو برامجا تنفيذية جديدة لإجراءات السلامة و الأمن الصناعي بالموقع کما لم تقترح أي نوع من أنواع التوعية بالسلامة والصحة المهنية بل کان ترکيز الرسالة حول الطرق المعتمدة و المتبعة حاليا في مجال السلامة فيما يخص صناعة الإنشاءات و التزمت هذة الدراسة بحساب تکلفة تطبيق تعليمات السلامة و الأمن الصناعي بمشاريع الإسکان في مصر، ولم تأخذ في الاعتبار تأثير هذه التکلفة على کلٍ من القيمة المالية للتعاقد أو صيغة العقود التنفيذية للمشروع وعلى الرغم من أن مشاريع الإسکان کانت هي محور الدراسة بهذة الرسالة فإن المنهج المتبع يمکن أن يطبق على جميع أنواع المشاريع المختلفة.
تم تصميم البرنامج الحسابي، وکان متوسط نسبة تطبيق خطة السلامة والأمن الصناعي لإنشاء المشاريع السکنية هى 1.22% حسب نتائج البرنامج. ولاعتماد نتائج البرنامج تم مقارنة النسب المحسوبة من البرنامج مع النسب المقررة من أبحاث سابقة في مجال السلامة وکانت نتائج البرنامج مقبولة ويمکن الاعتماد عليها في تقدير تکلفة تطبيق خطة السلامة والأمن الصناعي.
التطوير الناجح للبرنامج الحسابي المستخدم فى البحث قد يساعد المقاولين على معرفة تکلفة تطبيق خطة السلامة والأمن الصناعي في مرحلة العطاءات وهى مرحلة مبکرة تساهم في تقدير قيمة مقايسة الأعمال بدقة أکبر. و بناءً على النتائج ايضا فإن البرنامج يمکن أن يحسب قيمة تکلفة خطة السلامة والأمن الصناعي أثناء التنفيذ بناءً على دقة البيانات المستخدمة في البرنامج وکلما کانت البيانات المستخدمة واقعية وأقرب للحقيقة کانت نتائج البرنامج أکثر دقة وأقرب للواقع ونوصى باجراء ابحاث اخرى لتطوير البرنامج المستخدم.
Health and Safety,Building Project,Model Cost
https://jaes.journals.ekb.eg/article_19284.html
https://jaes.journals.ekb.eg/article_19284_d6630d2d236f28a37f486404f744ddbe.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
COMPARATIVE STUDY OF DIFFERENT CONTROL TECHNIQUES APPLIED ON 6 DOF ROBOT ARM
25
36
EN
Samer
Al-Marzoqi
Research department faculty of engineering Al-Azhar University
Ahmad
El-Bayoumy
Mansour
Department of electrical engineering, Al-Azhar University
10.21608/auej.2017.19285
Most of the industrial controllers used today for 6 DOF robot arm utilize PID controllers. Using PID controller without tuning method leads to response with unsuitable time-domain specifications (maximum-overshot, settling-time, rise-time, …). Ziegler-Nichols method was introduced as the conventional method for tuning the PID controller. By using this method, the enhancement of the response time-domain specifications is not sufficient. Recently, fuzzy logic with and without PID-controller, and genetic algorithm with PID-controller are also introduced to obtain suitable time-domain specifications of the response. This paper will introduce a new comparative study for these four tuning methods applied on 6 DOF robot arm in view of the response time domain specifications and the steady state error. Simulation results are obtained using the Mat lap/Simulink. The results show that the Fuzzy with PID controller responds better than the others in case of change in load and system disturbances.
Robot Arm,Forward kinematics,Inverse kinematics,PID controller,Fuzzy controller,Genetic Algorithm and Fuzzy PID controller
https://jaes.journals.ekb.eg/article_19285.html
https://jaes.journals.ekb.eg/article_19285_91be1e5840e8cc869532489278e90955.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
COMPARATIVE STUDY BETWEEN: TIME OF USING AND REAL- TIME PRICING USING FUZZY TECHNIQUE
69
76
EN
Ali
Hassan
Ibrahim Mansour
Faculty of engineering Al-Azhar University- Qena
A
S
Ahmed
Petroleum Pipeline Co., Cairo – Egypt
10.21608/auej.2017.19287
Demand-side management (DSM) programs in the industrial sector appear to be economically feasible due to the large controllable loads and relatively low costs per control point. Innovative electricity tariffs provide one of the most important DSM alternatives. Because real-time pricing (RTP) is considered as management option which reflects the real cost of generating electricity to the end user, the electricity cost saving potential of RTP through demand management is presented in this paper. These variables include the installed power consumption capacity of the plant, the plant's spare energy consumption capacity, and terms that describe the structure of the RTP tariff.
Time of using (TOU) pricing compared with (RTP) is presented, can either be applied as load management (LM) program or as incentive to drive the economics and the motivation to implement other types of LM programs. TOU pricing also can be taken as a way for consumers to adjust the electricity consumption among different time axis in accordance with the cost of electricity.
In the present paper, we proposed the fully arithmetic fuzzy operations method which is applied where all the parameters and variables are characterized by triangular fuzzy numbers. A comparison of Fuzzy arithmetic operations and ordinary operations is given
https://jaes.journals.ekb.eg/article_19287.html
https://jaes.journals.ekb.eg/article_19287_4dd3d13e6d7bcb971cabefdbd3c60409.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
PRACTICAL DESIGN OF THE FEEDBACK ELEMENT OF THE HORIZONTAL PART OF A DUAL-AXIS SUN TRACKER
91
102
EN
Mahmoud
S
Gaballa
Electrical Power and Machines Department, Helwan University,
Mohiy
Bahgat
Electrical Power and Machines Department, Helwan University,
Abdel-Ghany
M
Abdel-Ghany
Electrical Power and Machines Department, Helwan University
10.21608/auej.2017.19288
This paper presents a detailed design of all mechanical and electronic parts of a Deviation Measuring Unit (DMU). This unit has been used as a feedback element for the horizontal part of a dual-axis sun tracker. The proposed dual-axis sun tracker is designed to be fixed over moving surfaces such as vehicles, trains or ships. The modeling, simulation and implementation of the proposed sun tracker was earlier introduced in a previous work. Due to the fast and discontinuous change of the relative sun direction in the horizontal plane, a need arose for having a feedback element with special specifications among the control process. The designed DMU proven to meet all the desired specifications and concerns to satisfy the special needs for the designed tracking control system.
Sun Tracking System,Deviation Measuring Unit,DMU,Fast-Response Sun Tracker,Discontinuous Tracking,Dual-Axis Sun Tracker,Moving Sun Tracker
https://jaes.journals.ekb.eg/article_19288.html
https://jaes.journals.ekb.eg/article_19288_957d1680c441d1e1cbd00c7d309df693.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
AN EFFICIENT DISTRIBUTED KEY GENERATION PROTOCOL FOR TRANSIENT CLOUDS
131
143
EN
Mona
Samir
Lackousha
Science and Technology Center of Excellence, Military Technical College, and Misr International University
Hisham
Dahshan
Science and Technology Center of Excellence, Military Technical College, and Misr International University
Nabil
Hamdy
Shaker
Science and Technology Center of Excellence, Military Technical College, and Misr International University
10.21608/auej.2017.19289
Cloud computing presents a new approach to allow the development of dynamic, distributed and highly scalable software (e.g., networks, servers, storage, applications, and services) that can be rapidly supplied and allowed us with minimal management effort or service provider interaction. Cloud computing provides many advantages to its customers but failing to solve information security concerns. Strong encryption with key management is one of the core mechanisms that Cloud Computing systems should use to secure data, so key management is an important technology that can help secure applications and data in the cloud. In this paper, a proposed elliptic curve based distributed key generation (ECDKG) scheme for Transient Clouds is presented. Performance analysis showed that this scheme not only has strong security, but also has less computational and communication costs.
Cloud Computing,authentication,Encryption,Cryptographic Key Management (CKM),Elliptic Curve Cryptosystem (ECC).Mobile Cloud Computing (MCC),Mobile Services
https://jaes.journals.ekb.eg/article_19289.html
https://jaes.journals.ekb.eg/article_19289_ff896d07efa15d859c01700282c9386c.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
DESIGN OF FUZZY SELF TUNING PID LOAD FREQUENCY CONTROLLER FOR THE EGYPTIAN POWER SYSTEM
77
89
EN
M
A
Abdel Ghany
Faculty of Computer science-Nahda University (NUB), Bani Sweif City, Egypt
M
E
Bahgat
Electrical Power & Machines Department, Faculty of Engineering - Helwan,
University of Helwan, Cairo, Egypt
W
M
Refaey
Electrical Power & Machines Department, Faculty of Engineering - Helwan,
University of Helwan, Cairo, Egypt
F
N
Hassan
Electrical Power & Machines Department, Faculty of Engineering - Helwan,
University of Helwan, Cairo, Egypt
10.21608/auej.2017.19290
In this paper, a fuzzy self tuning is designed to update the proportional, integral, and derivative PID (FST-PID) gains which are optimized based on the Ant Colony System ACS. The design procedure is performed through two steps. Firstly, the PID gains are obtained using ACS algorithm and denoted by ACS-PID. Secondly, a fuzzy self-tuning is designed to self tune such gains. The developed approach is applied to the load-frequency control LFC of the Egyptian power system EPS as a single area with multi unit power system. The studied power system comprises three power plants; non-reheat, reheat, and hydro generation plants. The proposed PID controller is designed on an average point of four loading conditions of the EPS during summer and winter of 2008. The effectiveness of the FST-PID controller in the presence of the system inherent nonlinearity generation rate constraint GRC and uncertain system parameters under different disturbances locations are carried out using MATLAB-SIMULINK simulation program. The results prove that the proposed method is very useful in self tuning the PID controller gains for the LFC Egyptian Power System.
https://jaes.journals.ekb.eg/article_19290.html
https://jaes.journals.ekb.eg/article_19290_b5d49e36f8d0e35b2fd5debfbc18106c.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
EFFECT OF CA/P AND PH IN THE WET-SYNTHESIS REACTION ON THE FORMATION OF DIFFERENT CALCIUM PHOSPHATE PHASES
223
232
EN
M
Habib
Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.
K
Hussein
Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.
N
Fatahalla
Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.
10.21608/auej.2017.19296
Recently, there has been a growing new paradigm to use synthetic calcium phosphate biomaterials as bone substitutes in orthopedics applications. Their structure and composition are close to the human bone, and thus conferring them a good biocompatibility and osteoconductivity. Wet process is normally used for the synthesis of Hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP). However, the wet process was reported to be less reproducible for fabrication of pure apatitic phases in comparison to other synthesis processes. In this study, it is hypothesized that a specific apatitic phase that is normally obtained from stoichiometric reaction can be synthesized by using non-stoichiometric based reactants in a reproducible way by controlling the pH value during the synthesis process. A factorial design with two factors and three repeats was implemented to examine the hypothesis [A: Ca/P (1.5, 1.55, 1.667) and B: pH (7.5, 9.5)]. All precipitated powders were dried and aged overnight and then sintered for 2 hours at 800 °C. The powders were analyzed for phase, group and morphological analysis by X-Ray Diffraction (XRD), FTIR, and ESM/TEM, respectively. The results have revealed a better understanding of how to synthesize pure calcium phosphates phases for the repair of bone defects using the cost-effective wet chemical process. Small variation in the reactant molar ratio can significantly change the precipitated phases. Controlling the reaction pH can governor effectively the precipitation of a specific phase despite of the small variation in the molar ratio.
biomaterials,Calcium Phosphate Phases,Hydroxyapatite,Beta-Tricalcium Phosphate,Wet process
https://jaes.journals.ekb.eg/article_19296.html
https://jaes.journals.ekb.eg/article_19296_02998827cf0f3c58452f1aa68f6c119d.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
AEROELASTIC ANALYSIS OF A WIND BELT ENERGY HARVESTER
15
24
EN
Mohammed
A. Al-Rahman
Mechanical Engineering Department, Al-Azhar University
Ayman
Ali
El-Badawy
Mechanical Engineering Department, Al-Azhar University
Al-Adl
A
El Kady
Mechanical Engineering Department, Al-Azhar University
10.21608/auej.2017.19297
Wind belt technology is a method of energy harvesting that converts wind energy into mechanical energy, and then into electrical energy. The wind belt relies on an aerodynamic phenomenon known as aeroelastic flutter. The wind belt uses a tensioned belt undergoing flutter to extract energy from the wind and pair of magnets are attached to belt are coupled with fixed electric coils. The flutter of belt causes a change in the strength of the magnetic field applied to the electric coil, thus generating electricity. The objective of this paper is analyze of wind belt motion which is coupled between transverse and rotational motion to estimate flutter speed and natural frequencies. Developed wind belt device produce power about 1 mW DC at wind speed 3 m/s.
إن تکنولوجيا حزام الهواء المرن هي من طرق استخلاص الطاقة التي تحول طاقة الرياح الى طاقة ميکانيکية ومن ثم الى طاقة کهربائية. فحزام الهواء المرن يعتمد علي ظاهرة معروفة برفرفة المرونة الهوائية. حيث أن حزام الهواء المرن يستخدم حزام مشدود لکي يستخرج الطاقة من الرياح مثبت علية زوج من المغناطيس التى تتحرک مع الحزام مقترنين بملف کهربي ثابت. تتسبب رفرفة الحزام تغييرًا في شدة المجال المغناطيسي المطبق على الملف الکهربي وبالتالي يتولد الکهرباء . إن الغرض من هذا البحث هو تحليل حرکة حزام الهواء المرن التي هي ازدواج بين حرکه عرضيه وحرکة دورانية لتقدير الترددات الطبيعية والسرعة التي يحدث عندها الرفرفة. جهاز حزام الهواء المرن المطور ينتج 1 ملي وات من التيار المستمر عندما تکون سرعة الهواء 3 م/ث.
Wind belt,Aeroelastic flutter,coupled vibration analysis
https://jaes.journals.ekb.eg/article_19297.html
https://jaes.journals.ekb.eg/article_19297_52f0eadd5d8366c6eab29748a70d6ce6.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
SOLVING RESOURCE-CONSTRAINED PROJECT SCHEDULING PROBLEM USING GENETIC ALGORITHM
187
198
EN
Raafat
Elshaer
Industrial Engineering Department, Faculty of Engineering, Zagazig University, Sharkia, Egypt
Mona
shawky
Industrial Engineering Department, Faculty of Engineering, Zagazig University, Sharkia, Egypt
Hesham
Elawady
Industrial Engineering Department, Faculty of Engineering, Zagazig University, Sharkia, Egypt
Gamal
Nawara
Industrial Engineering Department, Faculty of Engineering, Zagazig University, Sharkia, Egypt
10.21608/auej.2017.19298
Due to the combinatorial nature of the resource-constrained project scheduling problem (RCPSP), there is a lot of artificial intelligence methods proposed to solve it. The Genetic Algorithm (GA), one of these methods, is considered to be a valuable search algorithm capable of finding a reasonable solution in a short computational time. The primary objective of this paper is to build a genetic algorithm for solving RCPSP problem aiming at minimizing project’s makespan. Based on a comprehensive review of different GAs and a full factorial experiment, a proposed GA has been presented. The proposed algorithm has been tested on a well-known benchmark (PSPLIB). The computation results show that the proposed GA outperforms many published algorithms and on average performs as well as other algorithms. Also, the performance of the algorithm improves in solving large scale problems
Resource Constrained Project Scheduling problems,Genetic Algorithm,Project makespan
https://jaes.journals.ekb.eg/article_19298.html
https://jaes.journals.ekb.eg/article_19298_647396ffdd95c9090894ad78cf6b4dea.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
RELATIVE PERMEABILITY CURVES AND WETTABILITY ALTERATIONS BY ALUMINA NANO PARTICLES FLOODING
103
119
EN
Sayed
Gomaa
Mining and Pet. Eng. Dept., Faculty of Eng., AL-Azhar University
Adel
Salem
Pet. Eng. Dept., Faculty of Pet. & Mining Eng., Suez University
Mohamed
Hassan
The British University in Egypt (BUE)
10.21608/auej.2017.19299
Nanotechnology was proposed as a new Enhanced Oil Recovery (EOR) technique for its great potential of increasing oil recovery either in secondary or tertiary recovery stage. Several types of nanoparticles have been used for different applications in the EOR. The recovery mechanisms of such improvement of these nano particles are still need more research to be interpreted. From these suspected parameter the rock wettability and relative permeability alteration. Moreover, these nanoparticles can be used in different concentration and different sizes in the EOR project. Consequently, it is very important to study the effect of these factors on the incremental oil recovery in order to create a successful EOR operations.
To achieve some of these concerns, a series of core flooding experiments was conducted to study the effect of Alumina nanofluid concentration in the displacing brine on the relative permeability curves, rock wettability and finally the ultimate recovery factor. During core flooding experiments, a sandstone core was used and all pertinent and required parameters are monitored and recorded. The relative permeability to oil and water were calculated, and the contact angle was measured to check the degree of the rock wettability while using this nanofluid as an additive to the displacing water.
The base run was performed using water to be used as a secondary recovery base run. The ultimate recovery factor by water flooding was found to be 60.38 % of the OOIP. Then a flooding process using Alumina nanofluid, as an additive to the displacing water, has been conducted with five different concentrations (3, 5, 7, 10, and 15 g/L). The ultimate recovery factor was calculated for all concentrations and has been found to be74.38%, 75.09%, 76.13%, 81.13%, and 61.70% respectively. The drawback in the ultimate recovery of 15 g/L run has been addressed and explained while the best concentration was the 10 g/L Alumina nanofluid which led to a 20.75 % oil recovery over that of water flooding.
The main recovery mechanisms are addressed and expected. The relative permeability curves for all of these experimental runs were measured at different nano alumina concentrations and compared to each other. The contact angle (as a mean to evaluate the wettability alteration) was measured in order to investigate the effect of this nano fluid on the rock wettability. It was found that those rocks became more water wet after using Alumina nanofluid. This work investigates and analyzes the new outcomes from implementing Alumina nanofluid for EOR. Ultimately, the knowledge gained from this work can be used as a guide to interpret and define the Nanofluids improvement mechanisms and help in drawing a road map for ongoing and future work.
Nanofluid,Alumina Nanoparticles,Wettability Alteration,Recovery Mechanisms,EOR
https://jaes.journals.ekb.eg/article_19299.html
https://jaes.journals.ekb.eg/article_19299_398534cf5d6198e93d368bb158b3ad6a.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
WATER CONING CORRELATIONS IN VERTICAL WELLS
213
222
EN
Ramadan
Emara
(Home) Al Azhar University, Faculty of Eng., Mining and Petroleum Eng. Department
10.21608/auej.2017.19301
One of the major problems that reduces significantly the crude oil production is water coning. When the well is produced, water moves up from the bottom water toward the wellbore in a cone shape. At certain conditions, water breaks through into the well and concurrent oil and water production starts.
Many methods have been presented to overcome this problem, whatever before or after the taking place of water coning. The critical rate is the widely method used to overcome this problem before its occurring.
The aim of this paper is to introduce a method to predict the critical rate, breakthrough time, and WOR (water oil ratio) after breakthrough in vertical wells. A 3-D numerical simulator model was used to perform a comprehensive sensitivity analysis of water coning process. From this analysis, an empirical coning correlation was developed based on the basic flow equations and regression analysis. The format of the correlation is similar to Addington's gas-coning and Yang’s water coning correlations.
The correlations presented in this paper provide a hand calculation fashion of coning prediction for vertical wells. The correlations were tested and found to be reliable and accurate in predicting the critical rate, breakthrough time and WOR, within the correlation parameter range.
Water coning,Critical rate,Water production
https://jaes.journals.ekb.eg/article_19301.html
https://jaes.journals.ekb.eg/article_19301_89ba077db0a30f2a4eb8fbee6a35a233.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
نظم تخطيط وتصميم مناطق الحماية البيئية
268
279
EN
بکر
هاشم
بيومي
قسم التخطيط العمراني - کلية الهندسة - جامعة الأزهر
زغلول
محمد
احمد الصعيدي
قسم التخطيط العمراني - کلية الهندسة - جامعة الأزهر
10.21608/auej.2017.19302
investment process in the field of natural reserves development, has a great political, economic, and social importance, among different economic activities . as the natural reserves, represents 15% of the area of Egypt, in addition to its close association with tourism, as one of the most important inputs to the national income of Egypt.
So this research will deal with one of the important critical environmental issues, that require rapid intervention, reaching full understanding of its various dimensions, which called <strong>Natural Reserves</strong>, which cosiderd late healthy reaction, to how natural environment deteriorated, and higher risks, as a result of oppression and depletion of its natural components, in the absence of the planner and urban designer's role. that's why this research will prepare methodology to plan, design the protected areas ( natural reserves ), to achieve the protection goals, regulate and legalize the distribution of activities and uses not to contradict, with those goals.
تحظى عملية الإستثمار فى مجال السياحه البيئيه داخل المحميات الطبيعيه بأهميه سياسيه وإقتصاديه وإجتماعيه کبيره بين العديد من الفعاليات الإقتصادية کون الإستثمار فى المحميات الطبيعيه بما تمثله من مساحه قدرها 15 % من مساحة القطر المصرى بالأضافه إلى إرتباطها الوثيق بمجالات الحمايه والحفاظ علي الأنواع النادره من نباتات وحيوانات .
لذا يتعرض هذا البحث لأحد القضايا البيئية الهامة والتي تتطلب التدخل السريع للوصول إلي تفهم کامل لأبعادها المختلفة ألا وهي التخطيط والتصميم داخل المحميات الطبيعيه , والتي تعد رد فعل صحي متأخر لما أصبحت عليه البيئه الطبيعيه من تدهور وما تتعرض إلية من أخطار نتيجة الجور عليها وإستنزاف مکوناتها الطبيعيه في غياب دور المخطط والمصمم العمراني ولذا يهتم البحث بوضع منهج لتخطيط وتصميم المناطق المحميه يحقق أهداف الحمايه وينظم ويقنن توزيع الأنشطه والإستخدامات بما لا يتعارض مع تلک أهداف الحمايه .
https://jaes.journals.ekb.eg/article_19302.html
https://jaes.journals.ekb.eg/article_19302_b74588e3e0057e25157095d98c047997.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
AN ARABIC FIGURES RECOGNITION MODEL BASED ON AUTOMATIC LEARNING OF LIP MOVEMENT
155
165
EN
Alzahraa
H
Reda
System and Computer Engineering Dept., Faculty of Engineering, Al-Azhar Univ.
Cairo, Egypt
A
Nasr
System and Computer Engineering Dept., Faculty of Engineering, Al-Azhar Univ.
Cairo, Egypt
Mohamed
M
Ezz
System and Computer Engineering Dept., Faculty of Engineering, Al-Azhar Univ.
Cairo, Egypt
Hany
M
Harb
System and Computer Engineering Dept., Faculty of Engineering, Al-Azhar Univ.
Cairo, Egypt
10.21608/auej.2017.19304
The need for an automatic speech to text conversion is continuously increasing, especially for people with special needs. Thus, automatic speech recognition techniques have been proposed to tackle such needs. The automatic recognition allows computers to identify words from lip movement, regardless of the visual source. It is known that visual speech recognition techniques improve the accuracy of word identification and shield the recognition system against acoustic noise. In this paper, we propose a hybrid voting model for automatic Arabic figures recognition based on visual perception of mouth-lip movement. The proposed model has been built for Arabic language, such that, it is able to extract Arabic figures from predefined Arabic lexicon. The predefined lexicon mainly contains the Arabic figures from zero to nine with different shapes. The model takes a video (or sequence of images) as an input, and outputs the corresponding Arabic figure for the frames extracted from the input video.
Here, three techniques have been employed to extract effective visual features from mouth-lip movement. Such techniques are SURF (speeded up robust features), HoG (histogram of oriented gradient) and Haar feature extractor. The resultant features in each technique are fed separately into a classification model, namely, the hidden Markov model (HMM). The HMM identifies corresponding Arabic figure from a predefined lexicon based on input features. The final classification models that are produced from the three techniques have been grouped in a voting scheme to produce the final classification result (i.e. classification by voting). The proposed model in this paper has been tested on handcrafted data set of lip movement, and it has shown a promising result with improved accuracy of Arabic figures recognition.
Automatic speech recognition,Hidden Markov Model,histogram of oriented gradients,speeded up robust feature,Haar feature extractor,Voting
https://jaes.journals.ekb.eg/article_19304.html
https://jaes.journals.ekb.eg/article_19304_e91031381c4e5be5d819f511b7f95d28.pdf
Al-Azhar University; Faculty of Engineering
Journal of Al-Azhar University Engineering Sector
1687-8418
3009-7622
12
42
2017
01
01
TOWARDS SUSTAINABLE URBAN DEVELOPMENT IN ARID REGIONS: MASDAR CITY AS A CASE STUDY
199
211
EN
Mohammed
Farouk
El-Aby
Architecture, Deanship of Preparatory Year & Supporting Studies,
University of Dammam, Saudi Arabia
10.21608/auej.2017.19306
The United Nations has highlighted the importance of the issues of development and housing policies through endorsing the International Strategy of Sheltering in 1988 [25]. The efforts of the United Nations in the domain of housing, whose concepts have been formulated so as to include Sustainable Cities in the conference of the United Nations: "Rio + 20: The Future We Desire", concerned with sustainable development, and held in Brazil in 2012. Hence, there is stress on partnership bonds among governments, the civil community and the private sector in order to develop cities in which opportunities are availed and everyone gets the chance to attain the basic services, energy, housing and transport in a sustainable manner [27].
The increase in population, however, has led to expansion in establishing new cities so as to fulfill the need for housing and effectively participate in accelerating development. It is also important to reclaim the desert regardless of the harsh environmental circumstance of those regions. Thus, the planners and the decision makers adopt the strategies of sustainable development in order to avoid creating new environmental, economic, social problems. Therefore, it is important to research in the study of experimenting in establishing sustainable cities in the environment of arid areas for the purpose of finding the pros and cons of those experiments and lay the foundation of developing those cities in a sustainable manner. Thus, we have chosen the city of Masdar in Abu Dhabi Emirate as a case study due to the richness of experimenting on that Emirate concerning the shift from investing in the formidable revenues of petro-urbanism, in what is known as petrol communities, to sustainable urban development represented in establishing the city of Masdar as the first sustainable city in the world. Nevertheless, so as to achieve those objectives, the research adopts the analytical descriptive methodology in the study of that strategic shift which is witnessed by Abu Dhabi Emirate. Also, the methodology of the case study is used in analyzing and evaluating the strategies of sustainability in the city of Masdar.
The research includes three principal aspects. The first aspect centers on the study of the environmental, economic, social and political factors which leads to transforming Abu Dhabi Emirate from petro-urbanism to urban sustainability. The second aspect deals with defining the city of Masdar as well as studying and analyzing its system of sustainability. The third and final aspect deals with analyzing the case study according to the three main principles of sustainability: social participation, economic sustainability and environmental sustainability. Thus, the research concludes many results and recommendations, on top of which the importance of providing an integrated system that works on developing cities in arid areas in a sustainable manner.
Sustainable Development,arid areas,Desert Cities,Masdar City,United Arab Emirates (UAE)
https://jaes.journals.ekb.eg/article_19306.html
https://jaes.journals.ekb.eg/article_19306_af03a44fbee19058954fea0ab857885b.pdf