EFFECT OF POLYPROPYLENE FIBERS LENGTH AND CONTENT ON CRACKS DEVELOPMENT IN CLAY LINING

Document Type : Original Article

Authors

1 Housing and Building National Research Center (HBRC) 87 El-Tahrir Street, Dokki, Giza, Egypt

2 Faculty of Engineering Al-Azhar University, Nasr City, Cairo, Egypt

Abstract

Clay represents an essential component used for lining and containment purposes. Clay performance as a liner is seriously affected by environmental changes and there is a need to limit such volumetric changes. Reinforcing clay with fibers is one of the techniques to limit desiccation volumetric changes. This study presents experimental program to study the effect of the inclusion of randomly distributed polypropylene fibers (PPF) with different lengths on the resistance of clay to desiccation cracking under multiple wetting-drying cycles. Specimens of unreinforced kaolinite clay as well as reinforced clay with PPF with lengths of 6 mm, 12 mm and 18 mm and fiber contents of 0.5%, 0.7%, 1.0%, and 1.50% PPF (by weight) are utilized in the study. Desiccation cracking is quantified by calculating Cracking Intensity Factor (CIF) values. The results show that the inclusion of fibers enhances the resistance to cracking up to certain fiber content after which such resistance decreases. The results also show that resistance of the reinforced clay to cracking. On the other hand, multiple wetting and drying reduces the effectiveness of fibers inclusion to resist desiccation cracking under multiple wetting and drying. However, longer fibers showed better resistance to cracking upon wetting and drying.
 
يستخدمالطين في أغراض التبطين والاحتواء.وظيفة الطين کبطانة تتأثر بشدة بالتغيرات الحجمية الناتجة عن التغييرات في البيئة المحيطة.وعليه ظهرت الحاجة لتسليح الطين بالالياف لمقاومة التغييرات الحجمية الناتجة عن جفاف الطين. تعرض هذهالدراسة تنفيذ برنامج تجريبي لدراسة تأثير إضافة ألياف البولي بروبلين (PPF)الموزعة عشوائيا بأطوال مختلفة على مقاومة الطين للشروخ تحت دورات ترطيب وتجفيف متعددة. تم استخدام عينات من طين الکاولين غير المسلحوکذلک الطين المسلح بأليافPPF  بأطوال 6 مم و 12 مم و 18 مم ومحتويات ألياف 0.5٪ و 0.7٪ و 1.0٪ و 1.50٪  )بالوزن) PPF في الدراسة. يتم تحديد کمية شروخ الجفاف عن طريق حساب قيم معامل کثافة الشروخ(CIF). اظهرت النتائج أن إدراج الألياف يعززمقاومة التشرخ حتى محتوى معين من الألياف وبعد ذلک تنخفض هذه المقاومة. کما أظهرت النتائج أن زيادة طول الألياف يزيد من مقاومة الطين المسلح للتشقق.من ناحية اخري، فإن الترطيب والتجفيف المتعدد يقلل من فعالية الألياف في مقاومة التشقق الناتج عنالجفاف. ومع ذلک، أظهرت الألياف الأطول مقاومة أفضل للتشقق عند الترطيب والتجفيف.

Keywords

Main Subjects