EVALUATION OF CODE AND PHASE SOLUTIONS FOR MULTIREFERENCE BASE STATIONS ON GPS MEASUREMENTS ACCURACY

Document Type : Original Article

Authors

1 Associate Professor of Public Works Engineering Department, Faculty of Engineering, Tanta University, Egypt

2 Professor of surveying and photogrammetry, Public Works Engineering Department, Faculty of Engineering, Tanta University, Egypt.

Abstract

The standard scenario of Global Positioning System (GPS) surveying is to use two carrier phase-tracking GPS receivers. The first receiver should be located at a reference station with known coordinates; while the second one is placed at another station whose coordinates need to be determined. The use of two GPS receivers and the relevant software package is costly and time consuming. Hence, it is simply to carry out the conventional Differential Global Positioning System (DGPS) for navigation over a medium scale. The developed approach aimed at providing sufficient accuracy of point coordinates measurements by using a minimum number of reference stations. GPS errors have been modeled and tested over the selected study area. This study compared DGPS against code and phase solutions and discussed pros and cons of single and multi-references on GPS observations. The test results demonstrated that using multi-reference stations are capable of improving the root mean square error (RMS) of the coordinate differences by 11% to 33% in the 3D position accuracy, as opposed for single reference station scenario.The RMS values can be further improved by 13.5% and 7.94% in plan coordinates and height respectively, when the modeling of atmospheric delay is applied to the differential corrections based on the pseudo-range observations collected from the multi-reference stations. Research outcomes prove that, the multi-reference GPS observations scenario increases performance, efficiency, and flexibility compared to the standard single reference station scenario.
 
يعتبر السيناريو األمثل إلستخدام نظام تحديد المواقع العالمي )GPS )في القياسات المساحة هو استخدام جهازي استقبال في نفس الوقت لتتبع طور الموجة الحاملة. حيث يحتل جهاز اإلستقبال األول محطة ثابتة مرجعية معلومة اإلحداثيات ، بينما يتم وضع جهاز االستقبال الثاني في المحطة األخرى المطلوب إيجاد إحداثياتها. ومن ثم فهناک حاجة ضرورية إلستخدام نظام تحديد المواقع العالمي التفاضلي التقليدي )DGPS )للمالحة. يهدف اإلسلوب الجديد إلى توفير دقة کافية لقياس إحداثيات النقاط باستخدام أقل عدد ممکن من المحطات الثابتة المرجعية. حيث تم نمذجة وإختبار أخطاء نظام تحديد المواقع العالمي )GPS )في منطقة الدراسة المحددة. قارنت هذه الدراسة نتائج إستخدام DGPS مع حلول الکود والطور وناقشت إيجابيات وسلبيات إستخدام المحطات الثابتة المرجعية الفردية والمتعددة على دقة قياسات GPS .أظهرت نتائج الدراسة أن استخدام المحطات الثابتة المرجعية المتعددة تحسن الخطأ التربيعي المتوسط ) RMS )في حساب اإلحداثيات بنسبة تتراوح ما بين 11 ٪إلى 33 ٪في حساب الموضع ثالثي األبعاد بالمقارنة بسيناريو إستخدام المحطة الثابتة المرجعية الفردية. کما اثبتت الدراسة أن قيم RMS تحسنت بنسبة 5.13 ٪ و 94.7 ٪في إإلحداثيات األفقية و الرأسية على التوالي وذلک عندما يتم تطبيق نموذج لحساب التأخير بسبب الغالف ًء على مالحظات المدى الزائف التي تم جمعها عند إستخدام المحطات الثابتة الجوي على التصحيحات التفاضلية بنا المرجعية المتعددة. أثبتت نتائج البحث أن سيناريو إستخدام المحطات الثابتة المرجعية المتعددة ألرصاد GPS يزيد بسيناريو إستخدام محطة ثابتة مرجعية فردية ً من األداء والکفاءة والمرونة مقارنة .

Keywords

Main Subjects