TWO PHASE MOTOR FED FROM SINGLE PHASE SUPPLY, USING CONTROL CIRCUIT

Document Type : Original Article

Authors

1 Electrical Engineer

2 Faculty Of Engineering, Helwan University

3 Faculty Of Engineering, Al-Azhar University

Abstract

The use of the two-phase stator windings with phase-angle control leaving the 2-phase
voltages equal in magnitudes, which leads to better utilization of the machine material.
The operation of 2-phase motor from single phase supply carried out by connecting one
stator phase directly to the voltages source, with exciting the second stator phase
through the phase shifting element. Minimum calculation effort for the two-phase stator
currents and the motor electromagnetic torque acting on the rotor are determined. This
calculation is carried out, using the time phase angle as parameter. In this method, the
starting and the maximum torque values can be controlled by changing the stator field
from a pulsating of (0o) to a pure rotating field at (90o).
 
تشغيل المحرک ثنائي الاوجه من مصدر احادي باستخدام دائره ازاحه زاويه  استخدام دائره الکترونيه لإيجاد زاويه طور تتغير من90درجه الى30 درجه لتغير من شکل منحنيات العزم مع السرعه عند ثبوت الحمل.کما ان تشغيل المحرک بوجهين منتظمين يتم في حاله ثبوت الزاويه عند 90 درجه وهذا يساعد على رفع قيمه العزم البدء وکذلک العزم الاقصى للمحرک. هذه الطريقه تجعل من الممکن تطبيقها في المحرکات احاديه الوجه حتى تتخلص من حاجتها الى مکثف بدء تشغيل ومفتاح طرد مرکزي ويقلل من أعطال المحرک0